SNR : SNC Pillow Block Housings

Seal versionsSC..DS Double lip sealSC..FS Felt strip sealSC..SV V-ring sealSC..LA Labyrinth seal Example designation:SC..TA Taconite seal SC518DSV..AV-ring (A version) in addition to SC..FSSC..ECCover plateAll SNC units are designed for both through shafts and for shaft end bearing arrangements. A cover(SC...EC) is available for these versions. This is inserted in the groove between the upper and lowersections in place of the second seal.Further information about the individual seal versions can be found in the Sealing systems section.To provide maximum flexibility when it comes to selecting, SNC seals are packaged as a set.One seal set is required for each side of the housing.Content of seal setSC..DS Double lip seal 1x double lip seal (2-part)SC..FS Felt strip seal 1x retainer (2-part) / 1x round cord (2-part) / Felt strips (2-part)SC..SV V-ring seal 1x V-ring (A version) / 1x contact washerSC..LA Labyrinth seal 1x Labyrinth ring / 1x round cordSC..TA Taconite seal 1x Taconite seal (multi-part; assembled)AccessoriesGrease regulation disc RDCRegulation discs are available as an option. The corresponding sizes can be found in the dimension tables.Further information about the grease regulation discs can be found in the corresponding section.10