Owner's Manual - Hunter Fan

Light Kit (continued)www.HunterFan.com 1.866.268.1936MetalPlateLightPullChainFanPullChainGlobeGlobeKeeperFinialCapFinialCONGRATULATIONS!YOU’RE DONE!Install a light bulb in each socket.Note: Globe style and number oflights may vary.Press the globe and globe keeperflush against the metal plate. Threadthe light pull chain through the holein the center of the finial cap andthread the fan pull chain through thehole in the side of the cap. Finally,thread only the light pull chainthrough the hole in the finial andscrew the finial onto the threaded rod.Connect the appropriate pullchain pendant to each of theshort chains coming from thefinial and finial cap. The fan pullchain controls the speed: high,medium, low, and off. The lightpull chain controls the lightfixture: on and off.16M0051-01 • 12/26/12 • © Hunter Fan CompanySee next page for fanoperation instructions.Note: In compliance with US federal energy regulations, this ceilingfan contains a device that restricts its light output. Exceeding thewattage limit marked on the MAX wattage sticker affixed to thelight socket(s) may result in fire hazard or improper operation.