ELECTROLYTIC CAPACITORS 2008

yageo corporation ALUMINUM electrolytic capacitorsSZ[ Ultra Low ESR ]105°C Single-Ended Lead Aluminum Electrolytic Capacitors For High Frequency ApplicationsMiniature AluminumElectrolytic CapacitorsElectrical CharacteristicsOperating Temperature : -40° ~ +105°CWorking Voltage : 6.3 ~ 16VRate Capacitance Range : 470 ~ 3300µFCapacitance Tolerance : -20 ~ +20%DC Leakage Current (µA) : I = 0.03 CV Whichever is greater.( Measurements shall be Made After a 2 Minute Charge at Rated Working Voltage )Dissipation Factor : at 120 Hz, 25°CWV (V) : 6.3 10 16D.F (%) : 22 19 16For capacitor whose capacitance exceeds 1000µF. The value of D.F(%) is increased by 2% for everyaddition of 1000µF.WV (V) : Rated Voltage (V) 6.3 10 16Impedance : Z - 25°C / Z + 20°C 2 2 2Impedance : Z - 40°C / Z + 20°C 3 3 3Load Life : 2000 Hours at 105°C Assured with Full Rated Maximum Ripple Current Applied(a) Capacitance Change : Within 20% of Initial Value(b) Dissipation Factor : Not Exceed 200% of Initial Requirement(c) Leakage Current : Not Exceed the Initial RequirementShelf Life : 1000 Hours, No Voltage Applied, at 105°C(a) Capacitance Change : Within 20% of Initial Value(b) Dissipation Factor : Not Exceed 200 % of Initial Requirement(c) Leakage Current : Not Exceed 200% of Initial RequirementdescriptionUsed in switching regulator applications in computers.Especially for high frequency.Low impedance and E.S.R., high permissible ripplecurrent at high frequency and higher operatingtemperature (-40°C to +105°C).High Temperature Load Life at 105°C for 2000HoursFrequency coefficientFrequency(Hz) 120 1K 10K 100K ≤Factor 0.50 0.80 0.90 1.00Temperature coefficientTemperature(°C) 65 85 105Factor 2.10 1.70 1.00diagram of dimensionsDimensions : mmDø F dø4.0 1.5 0.45Rubber Stand-off5.0 2.0 0.56.3 2.58.0 3.5Vinyl Sleeve(P.V.C)Rubber end SealVinyl Sleeve(P.V.C)Rubber end Seal10.0 5.0 0.6F0.F0.12.013.016.0 7.5 0.818.022.0 10.0 0.8LL ≤16 : L+1.5maxL >16 : L+2maxDø =8&10 : L+2.50.Max.1Min.Min.d0.Dø