ELECTROLYTIC CAPACITORS 2008

82specificationitemcharacteristicOperation Temperature Range -40 to +105°CRated Working Voltage Range 4 to 50V. DCRated Capacitqnce Range = 0.1 ~ 1000µFCapacitance Tolerance±20% (120Hz / 20°C)Leakage Current (25°C)Polarized : I ≤ 0.01CV or 3 (µA)Whichever is greater after 2 minutes application of DC rated working voltage at 25°C.I : Leakage Current (µA) C : Rated Capacitance (µF) V : Working Voltage (V)Low Temperature Stabilityimpedance Ratio at 120HzW V (V) .3 10 16 25 35 50Z(-25°C)/Z(+20°C) 2 2 2 2 2 2Z(-40°C)/Z(+20°C) 3 3 3 3Load LifeAfter 1000 hours application of W V at 105°C, the capacitor shall meet following limits.Capacitance Change≤ ±20% of Initial Valuedissipation Factor≤ 200% of Initial Specified ValueLeakage Current≤ Initial Specified ValueShelf LifeAfter placed at 105°C without voltage applied for 1000 hours,the capacitor shall meet the same requirement as Endurance.CASE SIZE & MAX RIPPLE CURRENTMax Ripple Current :(100KHz / 105°C)PolarizedµF 4 Ripple 6.3 Ripple 10 Ripple 16 Ripple 25 Ripple 35 Ripple 50 Ripple0.1 x.4 600.22 x.4 600.33 x.4 600. x.4 601 x.4 60 4X5.4 602.2 x.4 60 4X5.4 603.3 x.4 60 4X5.4 604.7 4X5.4 60 x.4 60 4X5.4 60 4X5.4 60 5X5.4 956.8 4X5.4 60 x.4 60 4X5.4 60 5X5.4 95 6.3X5.4 14010 4X5.4 60 x.4 60 4X5.4 60 5X5.4 95 5X5.4 95 6.3X5.4 14022 4X5.4 60 4X5.4 60 5X5.4 95 5X5.4 95 6.3X5.4 140 6.3X5.4 140 8X6.2 23033 4X5.4 60 5X5.4 95 5X5.4 95 5X5.4 95 6.3X5.4 140 8X6.2 230 8X10.2 4504X5.4 60 5X5.4 95 6.3X5.4 95 6.3X5.4 140 6.3X5.4 140 6.3X7.7 200 10X10.2 67047x.2 23068 4X5.4 60 6.3X5.4 140 6.3X5.4 140 8X6.2 230 8X10.2 450 8X10.2 450 10X10.2 670100 5X5.4 95 6.3X5.4 140 6.3X5.4 140 8X6.2 230 8X10.2 450 10X10.2 670 10X10.2 670150 6.3X5.4 140 8X6.2 230 8X6.2 230 10X10.2 450 10X10.2 670 10X10.2 670220 6.3X5.4 140 8X6.2 230 8X6.2 230 10X10.2 450 10X10.2 670 10X10.2 670330 x10.2 450 8X10.2 450 10X10.2 670470 10X10.2 670 10X10.2 670 10X10.2 6701000 10X10.2 670 10X10.2 670Note: *1.D x L: mm*2.Ripple Current : (mA/rms 105°C / 100KHz), ESR (Ω Max20°C / 100KHz)