![User Manual [ver 3.00] - Koukaam.se](https://img.yumpu.com/44771186/7/500x640/user-manual-ver-300-koukaamse.jpg)
User Manual [ver 3.00] - Koukaam.se
User Manual [ver 3.00] - Koukaam.se
User Manual [ver 3.00] - Koukaam.se
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Figure 3: device <strong>se</strong>t-upFigure 4: <strong>se</strong>t-up of network parametersWindow appears for <strong>se</strong>t-up of network parameters - IP address, Subnet mask and Gateway. (Figure4)After input of requested changes ba<strong>se</strong>d on your network environment, click Change IP. Changesare made to the device <strong>se</strong>ttings. Utility will update the <strong>se</strong>ttings of your NETIO and show devicelist with changed parameters. If there is DHCP <strong>se</strong>r<strong>ver</strong> in your network and you are not willingto change the <strong>se</strong>t-up network parameters manually, just skip to the next step. The defaultIP address is 192.168.10.100 – if there is no DHCP <strong>se</strong>r<strong>ver</strong> in the network. If a DHCP <strong>se</strong>r<strong>ver</strong>exists, the device gets the address from the DHCP.4. Web management could be opened both by typing the IP address of NETIO into your internetbrow<strong>se</strong>r or by double clicking on the device name in the NETIO disco<strong>ver</strong> utility.6
Change language