Single Method On-line Analyzers - Metrohm

ADI 2016 / 2018 / 2019Preconditioning and Stream selectorNot only the chemical analysis, but also the sample preparation or preconditioning is of the utmost importance for the successof a process analyzer system. Furthermore, the analyzer location is an important part of the analysis. The sample needs to be asrepresentative as possible, which means that the sampling point needs to be as close to the analyzer as possible.Metrohm Applikon can engineer and supply virtuallyany ‘unit operation’ for sample preconditioning:pressure reductioncoolingheating, heat tracing(ultra) filtrationprecipitationdilution to avoid crystallisationdegassinghomogenisingflow meteringphase separationWith more than 35 years of experience in process analyzersystems Metrohm Applikon can provide a complete andexact solution for almost any application.Projects range from one Analyzer in combination with simplesample preparation to complete packages with shelters,piping, wiring and interfacing.On-site, only the necessary utilities and the sample streamneed to be connected, saving a lot of time and energy in thestart up phase of the instrument.Multi-stream AnalyzerIn some cases the Analyzer can be equipped with a samplesequencer. This unit makes it possible to monitor multiplesample streams with one Analyzer. Each individualsample stream is assigned to an analog output module (4-20mA) that transfers the analysis result of the chosen samplestream to a process computer.