User's Manual - Pixord

Frame DelayTo set the delay time between frames. The unit of delay time is 10 microseconds. Youcan limit the output bandwidth via setting the frame delay to do the flow control of thevideo stream. When the value is set to 0, it means no limitation on the video stream.Click “Save Changes” bottom if needed for existing data changed in PIXORD NDCwhen power off.6.4.2 Video SourceThe Video Source feature allows the user to set additional channels for the device.Information such asIP address: Enter a valid IP address from an IP Camera or Video ServerPort: Enter the port number used for the IP address to display the videoUsername/Password: Enter the respective Username and Password if applicable. If nouser has been set for the device, the default value should be root and pass respectively.Video Channel: 1~4. Video channels from 2 to 4 are applicable for Video Servers.Video Type: select MJPEG and MPEG4.Rotation: Rotation degrees run from 0 to 270 degrees for a permanent digital position.MAC address: enter the appropriate MAC address from the device. The connection isonly applicable for IP Dome Cameras 261 and 26355 / 95