MV-370 / MV-372 VoIP GSM Gateway User Manual ... - LinkShop

More documents

Recommendations

Info

17.UpdateIn Update you can update the system’s firmware to the new one or do thefactory reset to let the system back to default setting.17.1 Update firmware(1) In New Firmware function you can update new firmware via HTTP inthis page. You can upgrade the firmware by the following steps:(2)Select the firmware code type, Risc code.(3)Click the “Browse” button in the right side of the File Location or youcan type the correct path and the filename in File Location blank.(4)Select the correct file you want to download to the system then clickthe Update button.(5) Please click update/default setting after update firmware-38-
17.2 Restore Default SettingsIn this page: Update/ Default Settings, you could restore the factorydefault settings to the system. All setting will restore default setting.IP will retain original IP as usual not default IP.-39-
Page 1 and 2: MV-370 / MV-372VoIP GSM GatewayUser
Page 3 and 4: 1.IntroductionMV-370/MV-372 is a 1/
Page 5 and 6: 5. MV-370 Panel description14.5cm3.
Page 7 and 8: 7.CABLING7.1 Connect the internet c
Page 9 and 10: 9.System Information.9.1 When you l
Page 11 and 12: (3) * means all numbers can be acce
Page 13 and 14: 10.3 Mobile to LAN Speed Dial Setti
Page 15 and 16: destination, e.g. 0911111111 or 091
Page 17 and 18: 11.2 Mobile Setting(1) (2)(3)(4)(5)
Page 19 and 20: proxy server. Please only fill prox
Page 21 and 22: Fwd to Mobile1:Fwd to Mobile2:Name1
Page 23 and 24: 11.5 use AT Command via Telnet or y
Page 25 and 26: 12.3 LAN Settings: You can check th
Page 27 and 28: 12.4 SNTP Settings:SNTP Setting fun
Page 29 and 30: Example:Register VoipBusterYour Voi
Page 31 and 32: 13.3 Codec Settings:You can setup t
Page 33 and 34: 13.5 DTMF SettingYou can setup the
Page 35 and 36: 13.7 SIP Responses13.7.1 486(busy h
Page 37 and 38: 14. NAT TransIn NAT Trans. you can
Page 39: 16.Save ChangeIn Save Change you ca
Page 43 and 44: 19. IP SettingThe operator can setu
Page 45 and 46: 20.Specification20.1 ProtocolsSIP (
Page 47 and 48: configure the box.Here are some scr
Page 49 and 50: Once Asterisk configuration is made
Page 51 and 52: username=103fromuser=103regexten=10
Page 53 and 54: secret=1002qualify=yesnat=yeshost=d
Page 55 and 56: Content-Type: application/sdpConten
Page 57 and 58: c=IN IP4 192.168.66.145t=0 0m=audio
Page 59 and 60: eived=192.168.66.203;rport=5060From
Page 61 and 62: OPTIONS sip:1002@192.168.66.203:506
Page 63 and 64: 15.21Federal Communications Commiss

MV-370 / MV-372 VoIP GSM Gateway User Manual ... - LinkShop

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?