Download... - Emuge UK

Operating instruction for the tapping attachmenttype GR and GR-S3XWWLQJWKHWDSSLQJDWWDFKPHQWLQWRRSHUDWLRQ1. Insert the tapping attachment into the adaptation of the machine spindle,PSRUWDQW:The tool change must not be executed while the machine spindlerotates!- Only use tool shanks and tightening bolts suitable for the specificmachine.- Make sure the tool is correctly clamped.⇒ Risk of accident by spinning of the tool!- Please see also the indications in the operating instruction of yourmachine tool!2. Secure the holding bar against twisting in both directions, see Picture 8Detail XDetail XMake sure the spindle isguided over its completemovement!Picture 8: Tapping attachment secured against twistingo7KHWDSSLQJDWWDFKPHQWLVQRZUHDG\IRURSHUDWLRQEdition: 15.09.20059`