Download... - Emuge UK

More documents

Recommendations

Info

Operating instruction for tapping attachmenttype GR and GR-S'HWDFKWRROIURPWKHWDSSLQJDWWDFKPHQW'HWDFKWRRORQW\SH*5,PSRUWDQW:The tool must not be changed while the machine spindle rotates!1. Detach the nut using the open ended spanner,PSRUWDQW:In order to avoid the damage of parts in the tapping attachment, pleasesupport the clamping nut, when being detached with the wrench c, withopen ended spanner d, see chapter 2.4.1, point 5.2. Detach driver cam through thread spindle3. Remove tool4. Screw off the nut5. Remove collet from the nut6. Eventually clean the parts14 Edition: 15.09.2005
Operating instruction for the tapping attachmenttype GR and GR-S'HWDFKWRRORQW\SH*56'HWDFKTXLFNFKDQJHDGDSWHU,PSRUWDQW:The quick-change adapter must not be changed while the machine spindlerotatesFixingGrip sleeveTool1. Push grip sleeve in direction ofshank and hold itquick-change adapter isautomatically releasedQuick-change adapter2. Remove quick-change adapter3. Let go of guiding bushEdition: 15.09.200515`
Page 1: ¥¡¤¢¡£¢£•2SHUDWLQJLQVWUXF
Page 4 and 5: Operating instruction for tapping a
Page 11 and 12: Operating instruction for the tappi
Page 13 and 14: Operating instruction for the tappi
Page 20 and 21: A.S. n. 1324alcune condizioni di be
Page 22: Operating instruction for tapping a

Download... - Emuge UK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?