HAND GRINDER - Factory Max CO., LTD

HANDGRINDER

HANDGRINDER

HANDGRINDER

LAPTRON 35●Japan Patent/No.1128235 ●U.S. Patent/No.4168916●Swiss Patent/No.629689 ●Germany Patent/No.2814467Light and slim handtool measuring 23 Ø in diameterComfortable to hold even by women and highly workable.HANDGRINDEREasily actualizes micron level precisionThe fi ne tip doesn’t generate heat and easily polishes even extremely narrow areas (0.3mm).• The tip can easily attached and detached.Itcomes with a diverse lineup of materialquality and tip size, and is especially superiorin polishing and grinding with superstone.• It is capable of high-precision, quick fi nishingof the rib, slit, oddly shaped holes or anyminuite areas. Output adjustments remainsimple, and since no heat is generated, itallows safe and comfortable work conditions.• Polishing super-minute areas withceramic superstone.• Polishing minute areas after heatsinkingwith a metal bond-diamond tip.272

LAPTRON 35CONFUGURATION●Power unit●Tip case●Holder●Foot switch●Hand tool●Input cord●Fastening jig●Tip fastening /1set●Attached tips/1set• ASSORTED STANDARD TIPSComing in a lineup of diverse standard tips for grinding and polishingaluminum, copper, alloy and even superalloy molds. Tips can be tailoredon request in addition to the standard lineup.HANDGRINDER• Metal bond-diamond tips (round)• Electrode diamond tips• Metal bond-diamond tips (tapered, 0.5 mm thickness)• Metal bond-diamond tips (0.7 mm thickness)• Metal bond-diamond tips (0.5 mm thickness)• Ruby tips • Bress tips • Wood tips (hard) • Wood tips (soft)• Tips for chasing • Ceramic-superstone tips (fl at)• Ceramic-superstone tips (round)SPECTIFICATIONSInput: AC100V, 110V, 120V, 200V, 220V, 230V, 240V50 / 60Hz, 50VAOutput: 15W max, 22KHz 4-stage selectionDimensions (WxDxH) : 260 X 185 X 110 (mm)Weight: approx 4kg273

LAPTRON 55/ 55R●Japan Patent/No.1128235 ●U.S. Patent/No.4168916●Switzerland Patent No.629689 ●Germany Patent No.2814467Further Advanced Supersonic Lapping MachineNew Model LAPTRON 55 SERIES!New circuit applied that enables use in a wide range of work.Work effi ciency drastically increases in various work environments.HANDGRINDER274

LAPTRON 55/ 55RProfessional spectifi cation machine for mold lappingWorld standard machine LAPTRON 55 series promises far easier operation.High power output supersonic lapping machine LAPTRON 55Supersonic high power output 45 W maximum at an amplitude of 45microns and a frequency of 22000 Hz.Enables comfortable and high quality mold lapping with minimumforce. The latest model of LAPTRON Series realizes speedy, highquality and extremely precise work.HANDGRINDERA variety of tips can be used.• The best tip selectable based on the application.Various types of tip available from precision tip, 0.3 mm thick,to large size tip, 15 mm wide and 150 mm long.• Lap narrow slits (0.5 mm)(Using SL tip)• Polishing with ceramic stone275

LAPTRON 55/ 55RLAPTRON 55R equipped with a rotary mechanismThe rotary mechanism, effective on curved surface work, adds to thebasic functions of LAPTRON 55.Effi ciency further increased. Futher high quality and extreme precisionrealized. Able to deal with any complicated shape in a widerange of work.Supersonic control circuit key technology applied tothis machine is protected by patents in four countries,namely Japan, USA, Germany and Switzerland. Theperformance is enhanced by our unique know-how.High quality finish easily achieved!!• Deal with various shapeShape diffi cult to lap using conventional manual work, such asrib, slit, deformed hole, concave bottom surface and preciseangles at corners can be achieved with highly accurate lapping.• Work effciency raised and high precision achievedWork effi ciency drastically raised because the work speedincreases fi ve to ten times manual work. Evenbeginners can perform mirror fi nish easily and speedily.Far easier operation realized by the new circuit!!• New circuit applied to restrict tip temperature riseThe new circuit restricts tip temperature rise as much as possible.Specifi cally, thermal breakage of ceramic tip is eliminated.HANDGRINDER• Four-stage power output adjustmentHigh power output of 45 W maximum. Appropriate power selectabledepending on operating conditions through four-stagepower adjustment.• Varying frequency automatically controlledVarying frequency depending on thickness and length of tipsautomatically traced. Vibration is controlled by the feedbackfrequency to maintain the optimum lapping condition.• Polishing deep ditches(Using diamond electrode tip)• Mirror finish with diamond pasteFrom precision molds to large sized molds!!• Deal with every type of moldEvery type of mold, such as plastic, die cast, press, as well asrubber and glass, can be lapped speedily.• Performance applicable to every materialSpeedy and highly accurate lapping applicable to every material,from non-ferrous metal to cemented carbide. Particularlyexcellent in lapping after electric discharge machining.• Rotary handpiece DC30V, 35000 r.p.m.Equipped with rotary machanism!!• Equipped with a high speed, high-torque motorLAPTRON 55R is equipped with a rotary mechanism drivenby a high-torque, high-power motor with a maximum speed of35000 r.p.m. (DC 30V).• High efficiency in curved surface workLapping work on round holes, radius surfaces and U-shapedgrooves can be performed taster and more easily. Various tipsavaliable that can be attached and detached in one motion.276

LAPTRON 55/ 55RCONFIGURATION (LAPTRON 55)1. Power unit 2. Tip case 3. Hand tool holder 4. Supersonichand tool 5. Foot switch 6. Fastening jig 7. Tip fastening/ 1set8. Tips for supersonic/ 1 setCONFIGURATION (LAPTRON 55R)1. Power unit 2. Tip case 3. Handpiece holder 4. Hand toolholder 5. Rotary handpiece 6. Foot switch 7. Supersonichand tool 8. Fastening jig 9. Tip fastening jig/ 1set 10. Tipsfor supersonic/ 1set 11. Tips for ratary/ 1setStandard tips for LAPTRON 55/55R (sold separately)Tips other than standard products to be manufactured uponrequest.Refer to the standard tips catalog for detailed informationHANDGRINDER1. Matal bond-diamond tips (large) 2. Matal bond-diamond tips (SL)3. Matal bond-diamond tips (SL with taper) 4. Matal bond-diamond tips (round)1. Electroplated diamond tips 2. Wood tips (hard/soft)3. Ceramic stone tips (fl at/round)SPECIFICATION LAPTRON 55 LAPTRON 55RInputAC100V,110V,120V,200V,220V,230V,240V,50/60Hz,120VAAC100V,110V,120V,200V,220V,230V,240V,50/60Hz,120VAOutputSupersonic oscillation 45W max. 22KHz,4-stage selection 45W max. 22KHz,4-stage selectionDC MotorDC3~30V . 35000 r.p.m.Dimension ( WxDxH ) mm 285 x 175 x 175Weight approx. 4kg approx. 5.6kg277

WELDING& LASERMACHINE

The best prices in the industry!Ultra-precision YAG Laser Mold Padding WelderHigh Performance!Fully Equipped!Ultra-precision YAG Laser Mold Padding WelderThe high-power YAG laser with a maximum power of 120 W and one pulse energy of 90 Joules realizes high-precision weldingwith a variety of metals and alloys. Moreover, it comes equipped with a triple safety system with a fi lter glass for the YAGlaser and two electronic shutters. It also has a binocular microscope with crosshair marker for pinpoint micro welding, and anindication beam essential for high-precision welding. We offer reliable performance in fully equipped units at the best pricesin the industry.WELDING& LASERMACHINEFull security and safety functions added!The powerful laser must be handled carefully to avoidthe risk of blindness. The SW-L120 was designed forreliability and comes equipped with a triple safety systemusing two electronic shutters in addition to a fi lterglass for the YAG laser.297

Indication beam for precise, accurate welding!Ultra-precision YAG Laser Mold Padding WelderAccurate welding! Astonishing prices!YAG Laser Mold Pading WelderThe indication beam enables precise, accurate welding. Radiation of the indicationbeam to the target point enables precise welding of the target area.Simple operation for accurate welding!Setup can be fi nished simply by specifying the welding parameters on the controlpanel. In addition, the binocular microscope has a crosshair marker. Commonuse of the indication beam assures precise, accurate welding. Furthermore,welding materials specifi cally for a laser are available for more effi cientoperation.WELDING& LASERMACHINECrosshair markerHigh-power welder at an astonishing price!The high-power YAG laser with a maximum power of 120 W and one pulseenergy of 90 Joules enables high-precision welding of a variety of metals andalloys. The welder can be used for 0.2 mm micro welding up to 0.5 mm padding.Furthermore, our original distribution system has resulted in an astonishinglylow price. In addition, after-sale technical service will certainly achieve customersatisfaction. Compare performance, equipment, price, and service withother manufacturers.Control panel298

Ultra-precision YAG Laser Mold Padding WelderSANWA WELD PROBroad Application Range● Aluminum mold ● Plastic mold ● Die casting mold ● Press mold● Glass mold ● Blow mold ● Rubber mold ● Copper alloy moldDiverse Purposes● Parting line part, slide edge areas where shocks are applied● Pin-gate areas, tunnel-gate areas● Repair of ejector-holes, thin edge areas● Smoothing pinholes and surface depressions after argon welding● Padding after electric discharge machining, nitriding, and tufftride processingExample of correction processRepair ExamplesReliable total supportWELDING& LASERMACHINEIncornerQuality + Service = TrustOur duty is not only to simply sell our products but also to deliverproducts where quality is strictly controlled to ensure customersafety and to help improve effi ciency. Furthermore, we supportour customer by providing reliable after-sale service, includinginspection and repair, and by supplying consumables as longas our products are used. Our greatest pleasure is achievingsatisfaction and trust from customers.Character erases1.Corner edge2.Thin part3.Parting line299

Accurate welding! Astonishing prices!YAG Laser Mold Pading WelderRepair ExamplesUltra-precision YAG Laser Mold Padding WelderCapable of welding uniform and accurate straight linesAluminum moldConfiguration (Include option)WELDING& LASERMACHINEWire rod for laser welding machine.1 Tool Box2 Replacement fi lter for water-cooled machine.3 Filter replacement tool.4 Wire rod for laser welding machine.5 Foot switch for laser.6 Foot switch for worktable.(option)7 Protective glasses for YAG.8 Screwdriver9 Gsa gauge10 Purifi ed water for water-cooled machine.11 Worktable.(option)This is a straight-rod welding material suitable for laser weldingmachines. The rod, which is not wound around a reel, canbe used as a straight rod. It is convenient for micro welding.SpecificationsSpecificationsLaser beam YAG YAG pulse output time. 0.5~20msLaser wavelength 1.06 μ m Pulse frequency 0.5~20HzMaximum output 120W Focal diameter 0.2~2mmPulse energy 90J Input Voltage AC200VDimensions Power supply W 595 X D 680 X H 1020 (mm)Head W 350 X D 1035 ~ 1300 X H 1000 ~ 1170 (mm)Cooled machine W 475 X D 710 X H 810 (mm)Worktable W 450 X D 500 X H 635 ~ 785 (mm)• The specifi cations and the external shape may change without advance notice due to revisions and enhancement of the product.300

Ultra-precision YAG Laser Mold Padding WelderSANWA WELD PROWelding materialsPlasticmoldDie castmoldPressmoldTypeWireThickness Ø 0.5 Ø 0.4 Ø 0.3 Ø 0.2Length 250mm X 20 (Total 5m)Hardness afterwelding HRCNAK-80 40~42STAVAX 52~55MAS-1 28~30QRO-90 50~53SKH-51 60~62SKD-11 55~57• These items may partially chang depending on the contents of the customer’s work.Optnal meterialsPlasticmoldDie castmoldTypeWireThickness Ø 0.5 Ø 0.4 Ø 0.3 Ø 0.2Length 250mm X 20 (Total 5m)Hardness afterwelding HRCNAK-80 40~42NAK-55 40~42HPM-50 40~42HPM-38 52~55HPM-2 52~55STAVAX 28~31RIGOR 52~55IMPAX 52~55NICKELalloy 30~33S50C (5m) 15~20SKD-61 28~32ORVAR 40~42QRO-90 50~53MAS-1 28~30PressSKD-11 55~57moldSKH-51 60~62SVERKER 55~57Other For nitriding 18~20For copper alloy WELDING& LASERMACHINE301

Ultra-precision Mold Padding WelderFurther evolution towardsa new generation!Marvelous high specificationsSW-V01 is here!More precise, easy-to-use newgeneration welderHigh specification model surpassinglaser weldingMarvelous high specificationsWELDING& LASERMACHINEThe two functions of resistance welding and high-precision TIG welding are integrated intoone; fi ve additional functions are newly introduced. This welder can appropriately supportvarious welding conditions. The minimum current for the TIG welding has been reducedto 2A. By applying the ultra precision mode (FINE mode), high precision, fi ne welding hasbeen materialized. The easy-to-use characteristics and performance surpass the laserwelder and support a wide range of customer needs.5 New Functions● Ultra precision modeBy selecting the “FINE mode,” thiswelder makes it possible to weldeven a fi ne core pin (diameter 0.2),which was too small for an ordinarywelder.● Continuous TIG modeWhen a large area will be welded,the Continuous TIG modeprovides smoother weldingmore quickly than laser welding.(Interval time: 0.1 sec2..0 sec)● Weld NavigationAppropriate current and weldingtime will automatically be set anddisplayed by setting the weldingtarget area, welding material, andsize.● Lead arcBy emitting a minute arc (2A) tothe welding target point in advance,the target portion can bewelded more precisely.● Data memory modeWith the SAVE mode, data for weldingconditions fi xed by an operatorcan be stored and read out againthe next time.302

Ultra-precision Mold Padding WelderCompliant with CE and CCC Marking.Designed with Special Attention to the Environment and Safety.WELD PRO SW-V01Broad Application Range● Plastic mold ● Die casting mold ● Press mold ● Glass mold ● Blow mold ●Rubber mold ● Copper alloy moldAssured Resistance Welding and Precise TIG weldingPrecise current-carrying time is achieved through inverter control for resistancewelding (1-30 m sec) and TIG welding (1-600 m sec), and then reliabletack welding and precise TIG welding can be assured. A welding currentcan also be adjusted up to ones for resistance welding (30-750 A) and TIGwelding (2-250 A).Diverse Purposes● Parting line part, slide edge areas where shocks are applied● Pin-gate areas, tunnel-gate areas● Repair of ejector-holes, thin edge areas● Smoothing pinholes and surface depressions after argon welding● Padding after electric discharge machining, nitriding, and tufftride processingVarious kinds of processing after welding are av ailableElectric discharge machining, creping, and blasting are possible after welding, as wellas heat-treating and nitriding.WELDING& LASERMACHINERepair examplesConnector core pin areaHelicoid slide edge areaWelding of inclined pins (Nitriding)Polished lens barrel (Helicoid)Welding of inclined pins (Nitriding)Polished lens barrel (Helicoid)303

WELD PRO SW-V01Configuration (Include option)Ultra-precision Mold Padding Welder1 Tool Box2 Foot switch3 Gas hose4 Output cord for resistance welding: for Ø 13 mm.Hand piece for resistance welding: for Ø 2/Ø 3 mm.5 Output cord for resistance welding: for Ø 18 mm.Hand piece for resistance welding: for Ø 5 mm.6 Torch cord for TIG welding7 Work cord8 Silver tungsten electrode for resistance welding9 Tungsten electrode for TIG welding Ø 1.6 mm.10 Metal cutter* A gas pressure adjuster shall be attached to products for domestic use only.* Either 4 or 5 shall be attached as a standard confi guration.Wiring diagramWelding materialsWELDING& LASERMACHINETypePlasticmoldDie castmoldWire Plate Porous Yarn HardnessafterMaterials Ø 0.8 Ø 0.6 Ø 0.4 Ø 0.3 Ø 0.2 Ø 0.1 t0.2 t0.1 t0.7x50 a welding2.5m 2m 5mm x 1m x80mm bottle HRCStandard attached materialsNAK-80 40~42STAVAX 52~55MAS-1 28~30QRO-90 50~53Press SKH-51 60~62moldSKD-11 55~57• These items may partially chang depending on the contents of the customer’s work.TypeMaterialsWire Plate Porous Yarn HardnessafterØ 0.8 Ø 0.6 Ø 0.4 Ø 0.3 Ø 0.2 Ø 0.1 t0.2 t0.1 t0.7x50 a welding2.5m 2m 5mm x 1m x80mm bottle HRCSpecificationsResistance welding TIG weldingInput VoltageSingle Phase AC200/230V 50/60Hz10.4 kVA (Peak value) 6.3 kVAReted Output CurrentMaximum Voltage of No-Load - 76 VOutput Current 30~750 A 2~250 AWelding Time 1~30ms 1~600msPlasticmoldOptnal meterials *wire Ø 0.8 shall be sold at 5m.NAK-80 40~42NAK-55 40~42HPM-50 40~42HPM-38 52~55HPM-2 52~55STAVAX 28~31RIGOR 52~55IMPAX 52~55SUS 316L NICKELalloy 30~33Repetition Period 400ms 0.1~2.0sControl MethodInverter MethodCooling MethodForced air coolingDimensions(W×D×H)mm 204 ×425 ×390Weight23.8kgSpecial materialsPorous materialsYarn● Dark welding helmet● Work microscope with a shield (x10)● Torch stand (2-axis stage Y, Z)● Halogen light* For details, please refer tothe optional accessory page.Die castmoldPressmoldS50C (5m) 15~20SKD-61 28~32ORVAR 40~42QRO-90 50~53MAS-1 28~30SKD-11 55~57SKH-51 60~62SVERKER 55~57Other For nitriding For copper alloy Safety Remarks• The operation, maintenance, and inspection of this product must only be conducted by a specialist thoroughlyfamillir with the product.304

Mold Padding Welder Quick Welder SW-808Repair molds on thespot as required!!The SW-808 is a capacitor dischargingdeposition equipment. The compact sizeincorporates a high-output circuit and iseasy to carry.Incorporating an Exclusive Intelligent Circuit.Optimal High-speed Welding. Actualizing aLightweight Design.Superior Workability■Superior weldability using condenser spot welding.■Easy milling and electrical discharge machining after repairs.■Superior performance to repair narrow and fi ne areas.■Easy padding by layering several thin welding plates on top of each other.■Newly designed handpiece to boost workability.User - Friendly■Easy viewing operation panel, makes work status apparent at a glance.■Highly portable, lightweight and compact design doesn’t limit work site, either.■Built - in alarm light to check overheating upon overloaded operation.■Standard foot switch boosts work convenience since both hands will be free to use.■Featuring high-insulation performance and high voltage capacity.The ensured safety design allows anyone to operate the equipment.WELDING& LASERMACHINENotable Repair ExamplesRepair parting areasCapable of Diverse Repairs on Mold Padding.Broad Application Range■Plastic mold■Die-cast mold■Press mold■Glass mold■Blow mold■Rubber moldDiverse Purposes■Repair parting lines, mounting or edges.■Bury pinholes or repair scratching inslide areas.■Repair excessive cutting away aftermachining.■Shape sharp tips or fi ne dents.Repair corner areasRepair pinholesRepair mounting305

Introducing a New Model thatStarts a New Era in Pad Weding!SpecificationsMold Padding Welder Quick Welder SW-808QUICK WELDERSW-8081 Tool Box2 Output Cord 1.3m3 Ground Wire 1.0m4 Foot Switch5 Electrode Holder (handpiece)6 Ground Cooper Plate 60 x 145 x 217 Metal Cutter8 Fuse 2 pieces9 Electrode(round) 2 Ø x 50 1 piece3 Ø x 50 1 piece4 Ø x 50 1 piece5 Ø x 50 1 piece(flat) 1.5 x 5 x 50 1 piece10 Welding Material (Plate)NAK-80 0.2tSKD-61 0.2tHPM-38 0.2t11 Welding Material (Paste)NAK-805 piece5 piece5 piece40g12 Welding Material (Porous Metal)Nickel Alloy 5 piece13 Welding Material (Yarn)Stainless1 pieceWELDING& LASERMACHINEIt realizes usefulness and light weightDiverse Features Only Possible with a MicrocomputerControlled Mechanism■High effi ciency condenser discharge system using high-tech switching circuit.■Lightweight design possible with microcomputer controlled circuit.■High speed continuous welding.Selectable 2 mode, single or continuous, welding operations.■20-step output adjustment, fi ne tuning possible through LED parameter.■Constantly stable output regardless of fl uctuating input.■Two pulse current widths, allows for user-friendly one-touch switchingfor easy operation of the most complex works.Easy-to-Use Hand PiecesThe hand piece is designed not to resist heating after long periods ofuse. (You can choose the appropriate hand-piece depending on yourwork.)ConfigurationDiameter: φ13mm, Length: 110mm, Electrode: φ2/φ3mm●Tool box ●Output Cord (1.3 m) ●Ground wire(1.0 m)●Foot Switch ●Electrode Holder (handpiece)●Ground Cooper Plate (60×145×2t) ●Metal Cutter●Fuse (2 pieces) ●Electrode(round/fl at)●Welding Material (Plate/Paste/Porous Metal/Yarn)Diameter: φ18mm, Length: 115mm, Electrode: φ2/φ3/ φ5 mmWelding Material for SW-808 (sold separately)●We offer various materials which are ready for various molds.●For further details, please see the page on welding materials.306

Welding Material for SW-808 (sold separately)Mold Padding Welder Quick Welder SW-808Introducing a New Model thatStarts a New Era in Pad Weding!Plate Metal Powder Paste Metal Porous MetalNAK-80 NAK-80 NAK-80 Nickel AlloyHPM-1 HPM-38 HPM-38 SUSHPM-2 HPM-50 HPM-50 OtherHPM-38 SKD-61 SKD-61 -HPM-50 SKD-11 SKD-11 -SKD-61 Nickel Alloy Nickel Alloy -SKD-11ElectrodeYarn MetalIMPAX(Copper Tungsten)HandpieceRIGOR Nickel Alloy (round) 2Ø X 50 13ØCALMAX SUS (round) 3Ø X 50 18ØSTAVAX Other (round) 4Ø X 50 -QRO90 - (round) 5Ø X 50 -YAG - (fl at) 1.5X5X50 -Power SpecificationsMethodInputConsumption electric powerOutputTact TimeControlCondenser Electrical Discharge SystemSingle Pase 230V50/60HzSingle Pase 100V50/60Hz630VA3000A MAX0.27sec. MINCPU ControlledOthersBuilt-in, single,Contonuous electricity switching functionDimensions(W×D×H)mm 180 ×240 ×390Weightapprox 17kg● Specifi cations may vary without prior notice.WELDING& LASERMACHINE307

Supersonic Wave Mold WasherSupersonic Wave Mold WasherU600TYPE-2RemovingMold Deposit (MD)Polyacetal (POM)!!Polycarbonata!!and Elastomer!!WELDING& LASERMACHINEThe “Type-2” model is a simple-design washer with selectedfunctions. It features the circulating pump, heaterwith controls, and a digital timer with a simple design,thus enabling comfortable and simple cleaning work.Compact DesignThe outside dimensions are 750 mm in width, 760 mm in depth, and 650 mm inheight, and the compact design is not location selective. In addition, the simpledesign is the result of narrowing down the features to only the necessary functions.This delivers a convenient, simple washing operation.Wide-typecleaning cage308

Supersonic Wave Mold WasherCirculating pumpSupersonic Wave Mold WasherSupersonic WaveThe use of a heater will generate a temperature difference at the upper and the lowerpart of the liquid in the washing tank. The Wave Clean washer stirs up the cleaning liquidevenly with the circulating pump. The refl ux fl ow of the liquid prevents generation ofuneven temperatures in the washing tank. As a result, the mold can be cleaned withoutunevenness and in every hole and corner.Comparative temperature rise distribution graphSurface Upper part Lower partWith Circulating pumpThe heater is preset at 60 CWhen 35 minutes pass after the start of heating, there is almost no temperaturedifference between the surface and the lower part of the vessel.Temperature ( C)Temperature ( C)706050403020100Surface60.9 CUpper part60.0 CLower part60.5 C5 10 15 20 25 30 35 40 45 50 55 60 Time (min.)No Circulating pumpThe heater is preset at 60 C706050403020100Surface69.9 CUpper part68.9 CLower part38.7 C5 10 15 20 25 30 35 40 45 50 55 60 Time (min.)When a circulating pump isworking, it can maintain thepreset temperature uniformlyeven it reaches 60 C.When 35 minutes pass after the start of heating, a temperature difference ofabout 38 C occurs between the surface and the lower part of the vessel.When there is no circulatingpump,the temperature riseseven after it reaches the presettemperature and a temperaturedifference of more than 20 Coccurs between the surfaceand the lower part of the vessel.WELDING& LASERMACHINEHeater with controlsThe heater will raise the cleaning liquidtemperature in the tank to enhancethe cleaning effect. The temperatureis adjustable in the range from 0 to70C by digital control.Liquid shortage sensorThe sensor detects the absence ofcleaning liquid and shuts down thesystem automatically. You do nothave to worry about heating withoutliquid during the unattended cleaningprocess.309

Supersonic Wave Mold WasherSupersonic Wave Mold WasherSupersonic WaveDigital control timerThe cleaning process time is controlledby the digital control timer, thusenhancing the effi ciency of cleaning.Digital control timerThe high-performance vibrator withthe oscillation frequency of 28 kHzclean mold from every hole and corner.Theoutput is adjustable in therange from 0 to 600W (300W, max.for U300) according to mold size.Standard AccessoriesSpecifications- Washing cage (mesh type)- Hose for bleeding off the cleaning liquid- Rubber gloves- pH-test paper- Pump for cleaning liquid- Protective mask- Protective glassesOutside dimensionsWeightTank dimensionsCage dimensionsMax. liquid amountPower consumptionSupersonic wave outputOscillation frequencyPower requirementW750 X D760 X H650(mm)Approx. 85 kg (main unit only)W450 X D350 X H250W440 X D340 X H20039 liters3.65kW0 to 600 W (variable with potentiometer)28kHz3-phase 200V ACWELDING& LASERMACHINE310