5-wire RS232 Touch Panel Controller - Fortec AG

ETP-5000RECG-025-wire RS232Touch Panel ControllerWe launched touch control board to meet latestRestriction of Hazardous Substances (RoHS) Directive.This touch panel controller provides the optimisticperformance of your analog resistive touch panels for5-wire models. It communicates with PC systemdirectly through RS232 connector. You can see howsuperior the design is in sensitivity 、 accuracy andfriendly operation. The touch panel driver emulatesmouse left and right button function and supportsoperation systems, including Microsoft Windows XP、Windows 2000 、 Windows 95/98 、 Windows Me 、Windows NT 4.0、Windows CE 2.12/3.0/.net、DOS、Linux (RedHat、Mandrake, etc)、Mac/OS 9 & X, etc.Controller:Specifications:RS-232 Type ControllerCircuit Board Dimension 20mm x 75mm (0.79inches x 2.95inches)----(5-Wire)Power Requirements D.C.+5V (100mA typical,50mV peak to peakmaximum ripple and noise)Operating Temperature 0 to 50 ℃Storage Temperature -40 to 80 ℃Relative Humidity 95% at 60 ℃InterfaceBi-directional RS-232 serial communicationProtocolNo parity,8 data bits,1 stop bit,9600 baud(N,8,1,9600)Resolution2048×2048 resolutionReport rateRS232 Model: Max. 160 points/secResponse time Max. 35 msAttached Cable 6' shielded cable with 9-pin D-sub connectorRegulatory Approvals FCC-B , CE,Unaffected by EMI from other nearly CRTsand other display devicesEMIUnaffected by environmental EMIPanel resistance 5 wire resistive model: 50 ~ 200 ohm1

ETP-5000RECG-02Product Package:(1) ETP-MB-5000RECG (5 wire RS232 control board)(2) ETP-CB-SXR00 (RS232 cable)(3) ETP-CB-5XN00 (5 pin Flat cable)Controller Panel Pin Assignment:ULURCOMLLLRController Wafer Pin Assignment:GVGTxRx2

ETP-5000RECG-02Flat Cable Pin Assignment:ULURCOMLLLR3