Product Specification - Fortec AG

Produktspezifikation für AUO G121SN01 V3Im Programm vonAchtung:Dieses Dokument unterliegt nicht dem Änderungsdienst. Der Standentspricht der Drucklegung. Bitte informieren Sie sich vor Verwendungob die technischen Daten noch dem aktuellen Stand entsprechen. Trotzsorgfältiger Kontrolle können wir leider keine Haftung für Druckfehleroder Irrtümer übernehmen.

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V3() Preliminary Specifications(V) Final SpecificationsModule12.1 Inch Color TFT-LCDModel NameG121SN01 V3CustomerDateApproved byDateDebbie Chiu 2008/03/07Checked &Approved byPrepared by______Sam Chen___ 2008/03/07Note: This specification is subject to changewithout notice.General Display Business Division /AU Optronics CorporationG121SN01 V3 rev.1.11/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V3Contents1. Operating Precautions.........................................................................................42. General Description .............................................................................................52.1 Display Characteristics ......................................................................................................52.2 Optical Characteristics.......................................................................................................63. Functional Block Diagram...................................................................................94. Absolute Maximum Ratings..............................................................................104.1 Absolute Ratings of TFT LCD Module..............................................................................104.2 Absolute Ratings of Environment .....................................................................................105. Electrical Characteristics ..................................................................................115.1 TFT LCD Module.............................................................................................................. 115.2 Backlight Unit ...................................................................................................................136. Signal Characteristic .........................................................................................156.1 Pixel Format Image ..........................................................................................................156.2 Scanning Direction...........................................................................................................156.3 Signal Description ............................................................................................................16LVDS Signal Format:6.4 The Input Data Format....................................................................176.4 The Input Data Format .....................................................................................................186.5 Interface Timing................................................................................................................196.6 Power ON/OFF Sequence ...............................................................................................207. Connector & Pin Assignment ...........................................................................217.1 TFT LCD Module: LVDS Connector .................................................................................217.2 Backlight Unit: Lamp Connector.......................................................................................218. Reliability Test Criteria ......................................................................................229. Mechanical Characteristics...............................................................................239.1 LCM Outline Dimension (Front View)...............................................................................239.2 LCM Outline Dimension (Rear View) ...............................................................................249.3 Screw Hole Depth and Center Position............................................................................2510. Label and Packaging........................................................................................2610.1 Shipping Label (on the rear side of TFT-LCD display)...................................................2610.2 Carton Package .............................................................................................................2611. Safety.................................................................................................................2711.1 Sharp Edge Requirements .............................................................................................2711.2 Materials.........................................................................................................................2711.3 Capacitors ......................................................................................................................2711.4 National Test Lab Requirement ......................................................................................27G121SN01 V3 rev.1.12/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V3Record of RevisionVersion and Date Page Old Description New Description Remark0.0 2007/11/07 All First Draft All1.0 2008/03/07 All Final version All1.1 2008/03/07 5 Power consumption: 7.8W Power consumption: 7.4W6 Viewing angleHorizontal(right): 70(typ); 60(min)Vertical(left): 70(typ); 60(min)6 Color/Chromaticity coordinateRed x/y: 0.620(typ)/0.340(typ)Green x/y: 0.305(typ)/0.585(typ)Blue x/y: 0.145(typ)/0.115(typ)11 IDD: 285(typ), 325(max)PDD: 0.94(typ), 1.07(max)Viewing angleHorizontal(right): 80(typ); 70(min)Vertical(left): 80(typ); 70(min)Color/Chromaticity coordinateRed x/y: 0.606(typ)/0.350(typ)Green x/y: 0.304(typ)/0.577(typ)Blue x/y: 0.149(typ)/0.127(typ)IDD: 200(typ), 220(max)PDD: 0.66(typ), 0.73(max)13 No VCFL statement Stating VCFL: 510 Volt (typ.)G121SN01 V3 rev.1.13/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V31. Operating Precautions1) Since front polarizer is easily damaged, please be cautious and not to scratch it.2) Be sure to turn off power supply when inserting or disconnecting from input connector.3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface.6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth whenhandling.7) Do not open nor modify the module assembly.8) Do not press the reflector sheet at the back of the module to any direction.9) In case if a module has to be put back into the packing container slot after it was taken out from thecontainer, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CCFLReflector edge softly. Otherwise the TFT Module may be damaged.10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the InterfaceConnector of the TFT Module.11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example), do not twist norbend the TFT Module even momentary. At designing the enclosure, it should be taken into considerationthat no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Modulemay be damaged.12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances orregulations for disposal.13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should besupplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be appliedexemption.14) The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit (IEC60950 or UL1950).Do not connect the CCFL in Hazardous Voltage Circuit.15) Severe temperature condition may result in different luminance, response time and lamp ignition voltage.16) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustionand reduce luminance dramatically.17) The data on this specification sheet is applicable when LCD module is placed in landscape position.18) Continuous displaying fixed pattern may induce image sticking. It ’s recommended to use screen saver or shufflecontent periodically if fixed pattern is displayed on the screen.G121SN01 V3 rev.1.14/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V32. General DescriptionG121SN01 V3 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a driver circuit, anda backlight system. The screen format is intended to support SVGA (800(H) x 600(V)) screen and 16.2M (RGB8-bits) or 262K colors (RGB 6-bits). All input signals are LVDS interface compatible. Inverter card of backlight isnot included.G121SN01 V3 is designed for industrial display applications.2.1 Display CharacteristicsThe following items are characteristics summary on the table under 25 condition:Items Unit SpecificationsScreen Diagonal [inch] 12.1Active Area [mm] 246.0(H) x 184.5(V)Pixels H x V 800x3(RGB) x 600Pixel Pitch [mm] 0.3075 x 0.3075Pixel ArrangementDisplay ModeR.G.B. Vertical StripeTN, Normally WhiteNominal Input Voltage VDD [Volt] 3.3 typ.Typical Power Consumption [Watt] 7.4W (64 Gray Bar Pattern, exclude inverter)Weight [Grams] 660g (typ.)Physical Size [mm] 279.0(H)x 209.0(V) x 11.0(D) (typ.)Electrical InterfaceSurface TreatmentSupport ColorTemperature RangeOperatingStorage (Non-Operating)RoHS Compliance[ o C][ o C]1 channel LVDSAG, Hardness 3H16.2M/262K colors-30 to +85 (+85 aspanel surface temperature)-30 to +85RoHS ComplianceG121SN01 V3 rev.1.15/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V32.2 Optical CharacteristicsThe optical characteristics are measured under stable conditions at 25 (Room Temperature):Item Unit Conditions Min. Typ. Max. NoteWhite Luminance [cd/m 2 ]IRCFL= 6.0mA(center point)320 400 - 1Uniformity 13 Points - 1.25 1.60 1, 2, 3,Contrast Ratio 500 600 - 4[msec] Rising - 10 20 5Response Time[msec] Falling - 25 30[msec] Rising + Falling - 35 5056Viewing Angle[degree][degree][degree][degree]HorizontalCR = 10VerticalCR = 10(Right)(Left)(Upper)(Lower)7070455580805060----66Red x 0.576 0.606 0.636Red y 0.320 0.350 0.380Color / ChromaticityCoordinates(CIE 1931)Green x 0.274 0.304 0.334Green y 0.547 0.577 0.607Blue x 0.119 0.149 0.179Blue y 0.097 0.127 0.157White x 0.283 0.313 0.343White y 0.299 0.329 0.359Color Gamut%55G121SN01 V3 rev.1.16/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V3Note 1: Measurement methodEquipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)Aperture 1with 50cm viewing distanceTest PointEnvironmentCenter< 1 luxLCD ModuleSR_3 orequivalentMeasuring distanceModule Driving EquipmentNote 2: Definition of 13 points positionWW /4W /4W /4W /4101 0H /41 012 34 5H /4H678H /49 10H /41 01 11 21 3Note 3: The luminance uniformity of 13 points is defined by dividing the minimum luminance values by themaximum test point luminance. W13 =Maximum Brightness of Thirteen PointsMinimum Brightness of Thirteen PointsG121SN01 V3 rev.1.17/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V3Note 4: Definition of contrast ratio (CR):Contrast ratio (CR)=Brightness on the “White” stateBrightness on the “Black” stateNote 5: Definition of response time:The output signals of photo detector are measured when the input signals are changed from “White” to “Black”(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and90% of amplitudes. Please refer to the figure as below.%TfTrOpticalresponse10090100White Black WhiteNote 6: Definition of viewing angleViewing angle is the measurement of contrast ratio10, at the screen center, over a 180 ° horizontal and 180°vertical range (off-normal viewing angles). The 180 ° viewing angle range is broken down as below: 90 ° (θ)horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typicallyperpendicular to the display surface with the screen rotated to its center to develop the desired measurementviewing angle.G121SN01 V3 rev.1.18/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V33. Functional Block DiagramThe following diagram shows the functional block of the 12.1 inch color TFT/LCD module:LVDS Connector:MSB240420-ELamp Connector:JST BHR-03VS-1Mating Type:P240420 or compatibleMating Type:SM03(4.0)B-BHS-1-TB or compatibleG121SN01 V3 rev.1.19/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V34. Absolute Maximum Ratings4.1 Absolute Ratings of TFT LCD ModuleItem Symbol Min Max UnitLogic/LCD DriveVoltageVin -0.3 +3.6 [Volt]4.2 Absolute Ratings of EnvironmentItem Symbol Min Max UnitOperating Temperature TOP -30 +85 [ o C]Operation Humidity HOP 8 95 [%RH]Storage Temperature TST -30 +85 [ o C]Storage Humidity HST 5 95 [%RH]Note: Maximum Wet-Bulb should be 39 and no condensation.G121SN01 V3 rev.1.110/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V35. Electrical Characteristics5.1 TFT LCD Module5.1.1 Power SpecificationSymbol Parameter Min Typ Max Units RemarkVDDLogic/LCD DriveVoltage3.0 3.3 3.6 [Volt]IDD VDD Current - 200 220 [mA] VDD=3.3V, All Black PatternIrush LCD Inrush Current - - 1.5 [A]Vin=3.3V, With Black Pattern,Rising time=500us,PDD VDD Power - 0.66 0.73 [Watt] VDD=3.3V, All Black PatternVDDrpAllowable Logic/LCDDrive Ripple Voltage - 100[mV]p-pVDDnsAllowable Logic/LCDDrive Ripple Noise100[mV]p-pG121SN01 V3 rev.1.111/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V35.1.2 Signal Electrical CharacteristicsInput signals shall be low or Hi-Z state when VDD is off.Symbol Item Min. Typ. Max. Unit RemarkVID Input Differential Voltage 250 350 450 [mV]VICMDifferential Input Common Mode Voltage 1.0 1.25 2.0 [V]VTH Differential Input High Threshold - - 100 [mV] VCM=1.25VVTL Differential Input Low Threshold -100 - - [mV] VCM=1.25VCLK Clock frequency 30 40 50 MHzNote: LVDS Signal Waveform.G121SN01 V3 rev.1.112/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V35.2 Backlight Unit5.2.1 Parameter guideline for CCFLFollowing characteristics are measured under a stable condition using an inverter at 25(Room Temperature):Symbol Parameter Min. Typ. Max. Unit RemarkIRCFL CCFL operation range 3 6 6.5[mA]rms(Ta=25 o C) Note 1, 2FCFL CCFL Frequency 40 55 60 [KHz] (Ta=25 o C) Note 3ViCFL0 o [Volt]C) CCFL Ignition Voltage - 930 1,120(Ta= 0 o C)rms(reference)ViCFL(25 o C)(reference)CCFL Ignition Voltage - 770 930[Volt]rms(Ta=25 o C)VCFL CCFL Discharge Voltage 510[Volt]rms(Ta=25 o C)IRCFL=6.0mAPCFLCCFL Power consumption(inverter excluded)3.8 6.7 7.7 [Watt] (Ta=25 o C) Note 4Lamp Life 50,000 - Hrs(Ta=25 o C) Note 2IRCFL = 6mANote 1: IRCFL is defined as the return current of an inverter. (In Figure 1)+HiInverter-mALoLamp(Figure 1: Measurement of return current)A stable IRCFL is a current without flicker or biasing waveform provided by inverter that ensures thebacklight perform to its specification. The ideal sine waveform should be symmetric in positive and negativepolarities and the asymmetry rate of the inverter waveform should be below 10%.IpReference(Note) Ip: Positive peak valueI-p: Negative peak valueIrms: Effective valueI-pG121SN01 V3 rev.1.113/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V3DC Bias = (| Ip – I-p| / Irms ) x 100 % 6.5 mA) shortens lamp life time dramatically.Note 3: CCFL frequency should be carefully determined to avoid interference between inverter and TFT LCD.Higher frequency will induce higher leakage current and further impact lamp life.Note 4: Calculator value for reference (IRCFLxVCFLx2=PCFL).Note 5: The display is with dual lamp design, and the CCFL current in above table refers to each lampG121SN01 V3 rev.1.114/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V36. Signal Characteristic6.1 Pixel Format ImageFollowing figure shows the relationship between input signal and LCD pixel format.1 2 799 8001 st Line R G B R G BR G B R G B600 th Line R G B R G B R G B R G B6.2 Scanning DirectionThe following figures show the image seen from the front view. The arrow indicates the direction of scan.Fig. 1 Normal scan (Pin19 = GND/NC)Fig. 2 Reverse scan (Pin19 = High)G121SN01 V3 rev.1.115/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V36.3 Signal DescriptionThe module uses a LVDS receiver embedded in AUO ’s ASIC. LVDS is a differential signal technology for LCDinterface and a high-speed data transfer device. Mating LVDS transmitter: THC63LVDM83A or equivalent devicePin Assignment:Pin# Signal Name Description1 VDD 3.3V Power Supply2 VDD 3.3V Power Supply3 GND GND4 6-8Bit SEL Select 6 or 8 Bits LVDS Input (VCC:8Bits ; GND/NC: 6Bits)5 RIN0- Negative(-) LVDS differential data input6 RIN0+ Positive(+) LVDS differential data input7 GND GND8 RIN1- Negative(-) LVDS differential data input9 RIN1+ Positive(+) LVDS differential data input10 GND GND11 RIN2- Negative(-) LVDS differential data input12 RIN2+ Positive(+) LVDS differential data input13 GND GND14 CLKIN- Clock Signal(-)15 CLKIN+ Clock Signal(+)16 GND GND17 RIN3- Negative(-) LVDS differential data input(Used for 8Bits LVDS Input; NC for 6Bits)18 RIN3+ Positive(+) LVDS differential data input(Used for 8Bits LVDS Input; NC for 6Bits)19 REVERSE Display Reversed Function(VCC: Display Reverse; GND/NC: Normal Display)20 NC/GND AUO Test Function Pin(Do not set this pin to High)Note1 Pin19 can be used for enabling “reverse scan” function.Refer to section 6.1 for scanning direction.G121SN01 V3 rev.1.116/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V3LVDS Signal Format:6-8 Bit SEL = Low (GND)6-8 Bit SEL = HighG121SN01 V3 rev.1.117/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V36.4 The Input Data FormatSignal Name Description+RED5(R5)+RED4(R4)+RED3(R3)Red Data 5 (MSB)Red Data 4Red Data 3Red-pixel DataEach red pixel’s brightness data consists of these6 bits pixel data.+RED2(R2)+RED1(R1)+RED0(R0)Red Data 2Red Data 1Red Data 0 (LSB)Red-pixel Data+GREEN5(G5)+GREEN4(G4)Green Data 5 (MSB)Green Data 4Green-pixel DataEach green pixel’s brightness data consists of these+GREEN3(G3) Green Data 3 6 bits pixel data.+GREEN2(G2) Green Data 2+GREEN1(G1) Green Data 1+GREEN0(G0)Green Data 0 (LSB)Green-pixel Data+BLUE5(B5)+BLUE4(B4)+BLUE3(B3)Blue Data 5 (MSB)Blue Data 4Blue Data 3Blue-pixel DataEach blue pixel’s brightness data consists of these6 bits pixel data.+BLUE2(B2)+BLUE1(B1)+BLUE0(B0)Blue Data 2Blue Data 1Blue Data 0 (LSB)Blue-pixel DataCLK Data Clock The typical frequency is 40MHz. The signal isused to strobe the pixel data and DE signals.All pixel data shall be valid at the falling edge whenthe DE signal is high.DE Display Timing This signal is strobed at the falling edge of CLK.When the signal is high, the pixel data shall be validto be displayed.VSYNC Vertical Sync The signal is synchronized to CLK.HSYNC Horizontal Sync The signal is synchronized to CLK.Note: Output signals from any system shall be low or Hi-Z state when VDD is off.G121SN01 V3 rev.1.118/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V36.5 Interface Timing6.5.1 Timing CharacteristicsDE only modeParameter Symbol Min. Typ. Max. Unit ConditionClock frequency 1/ T Clock 33.6 39.8 48.3 MHzVerticalSectionHorizontalSectionPeriod T V 608 628 650Active T VD 600 600 600Blanking T VB 8 28 50Period T H 920 1056 1240Active T HD 800 800 800Blanking T HB 120 256 440T LineT ClockNote1: Frame rate is 60 Hz.Note2: Typical value refer to VESA Standard6.5.2 Input Timing DiagramG121SN01 V3 rev.1.119/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V36.6 Power ON/OFF SequenceVDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from anysystem shall be Hi-Z state or low level when VDD is off.Power SupplyVDD90 %90 %0V10 %T1 T2 T3 T410 %T7Interface Singal0V10 % 10 %T5T6Backlight ON0V10 %10 %Power ON/OFF sequence timingParameterValueMin. Typ. Max.UnitsT1 0.5 - 10 msT2 0 - 50 msT3 0 - 50 msT4 0 - 10 msT5 200 - msT6 200 - msT7 500 - - MsThe above on/off sequence should be applied to avoid abnormal function in the display. Please make sure toturn off the power when you plug the cable into the input connector or pull the cable out of the connector.G121SN01 V3 rev.1.120/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V37. Connector & Pin AssignmentPhysical interface is described as for the connector on module. These connectors are capable of accommodatingthe following signals and will be following components.7.1 TFT LCD Module: LVDS ConnectorConnector Name / DesignationManufacturerConnector Model NumberMating Model NumberSignal ConnectorSTMMSB240420-EP240420 or compatibleMating LVDS transmitter: THC63LVDM83A or equivalent device7.2 Backlight Unit: Lamp ConnectorConnector Name / DesignationManufacturerConnector Model NumberMating Model NumberLamp ConnectorJSTJST BHR-03VS-1 or compatibleJST SM03(4.0)B-BHS-1-TB or compatiblePin no. Symbol Function Remark1 H CCFL power supply (H.V.) Cable color: Pink2 NC No connection3 L CCFL power supply (GND) Cable color: WhiteG121SN01 V3 rev.1.121/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V38. Reliability Test CriteriaItems Required Condition NoteHigh TemperatureOperation 85 , 240Hrs (center point of panel surface) Note 1, 2, 3Low TemperatureOperation-30 , 240HrsNote 1, 2, 3Hot Storage 85 , 240HrsNote 1, 2, 3Cold Storage -30 , 240HrsNote 1, 2, 3High temperature &high humidityoperationShock Test(Non-Operating)Vibration Test(Non-Operating)50 , 90%RH, 240Hrs(No condensation)Note 1, 2, 350G/11ms, ±X, ±Y, ±Z, half-Sin, one time Note 1, 2, 31.5G, random 10H Z ~ 200H Z ~ 10H Z30 minutes for each Axis (X, Y, Z), 15min/SweepNote 1, 2, 3On/off test On 10sec/OFF 10 sec, 30,000 cycles Note 1, 2, 3ESDThermal shock(non-operation)Contact Discharge: Max±8KV, 150pF(330Ω) 1sec, 8 points, 25times/point.Air Discharge: Max ±15KV, 150pF(330Ω) 1sec, 8 points, 25times/point1. -20 ±3 …30minutes60 ±3 …30minutes2. 100 cycles3. Temperature transition time within 5 minutesNote 3, 4Note 1, 2, 3Attitude TestOperation:14,000ft / 8hrsNon-Operation: 40,000ft / 24hrsNote 1: Evaluation should be tested after storage at room temperature for one hour.Note 3Note 2: There should be no change which might affect the practical display function when the displayquality test is conducted under normal operating condition.Note 3: Judgment: 1. Function OKNote 4: According to EN61000-4-2 , ESD class B: Some performance degradation allowed. No data lost,self-recoverable. No hardware failures.G121SN01 V3 rev.1.122/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V3al Characteristicstline Dimension (Front View)G121SN01 V3 rev.1.123/27th FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V3tline Dimension (Rear View)G121SN01 V3 rev.1.124/27th FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V39.3 Screw Hole Depth and Center PositionScrew type: M3 screwScrew hole minimum depth, from side surface =2.7mm (See drawing)The Max. Diameter of the mounting screw head is 6.0mmScrew Torque: Maximum 6.0 kgf-cmG121SN01 V3 rev.1.125/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V310. Label and Packaging10.1 Shipping Label (on the rear side of TFT-LCD display)10.2 Carton PackageMax capacity: 20 TFT-LCD modules per carton.Max weight: 17 kg per cartonOutside dimension of carton: 576(L) mm x 326(L) mm x 420(H) mmG121SN01 V3 rev.1.126/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V311. Safety11.1 Sharp Edge RequirementsThere will be no sharp edges or comers on the display assembly that could cause injury.11.2 MaterialsToxicityThere will be no carcinogenic materials used anywhere in the display module. If toxic materials areused, they will be reviewed and approved by the responsible AUO toxicologist.11.3 CapacitorsIf any polarized capacitors are used in the display assembly, provisions will be made to keep themfrom being inserted backwards.11.4 National Test Lab RequirementThe display module will satisfy all requirements for compliance to:UL 60950U.S.A. Information Technology EquipmentG121SN01 V3 rev.1.127/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com