Breathing life into your environment - Ferrob

ConstructionElectricalMotorGuaranteeInstallationPerformanceAdditional DataThese fans are moulded in impact resistant high gloss ABS thermoplastics forstrength, durability and finish.220-230v ~ A.C. 50Hz Single phase consuming 14 watts. These fans aredouble insulated and do not require an earth. All wiring must comply withcurrent IEE regulations. A double pole isolating switch, having a contactseparation of at least 3mm in all poles, must be used with a 3 amp fuse fittedand mounted a minimum of 1.75 metres from the floor and less than 400mmfrom the ceiling.Do not install the fans above a heat source. e.g. cooker, radiator.Single phase induction motor with pre-oiled bearings fitted for a longmaintenance free life and protected by a thermal fuse.Two year no quibble guarantee.Both 230v and 12v ranges are designed to be wall or ceiling mounted. Kitsavailable on request.Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white,terracotta, stone, grey or brown).Ceiling kits comprise 3m 100mm flexible ducting and an external fixed grille(colours to suit).Installation through a wall or ceiling requires a 107mm hole.SL100 / SL100LV - extract rate of 90m³/hr, 27 litres per second.Maximum pressure: 38 p.a. Fan speed: 2400 r.p.m.Sound volume: 40.0 dB(A) Maximum operating temperature 40ºC.Protection Rating – IP34.Graph for Slimline 100 and Slimline 100 Low Voltage Ranges80706050Pressure (Pa) 4030201000 50 100 150 200 250 300 350Extract Capacity (m3/hr)ADAB150 mm150 mmØ100 mmBØCD108 mm12 mmHole sizes:wall/ceiling107 mmCFerrob Limited, Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW; Tel: 01635 299266 Fax: 01635 299277Email: sales@ferrob.co.ukMay 11