Breathing life into your environment - Ferrob

ElectricalMotorGuaranteeInstallationPerformanceAdditional Data220-230v ~ A.C. 50Hz Single phase consuming 20 watts. These fans are doubleinsulated and do not require an earth. All wiring must comply with current IEEregulations. A double pole isolating switch, having a contact separation of at least3mm in all poles, must be used with a 3 amp fuse fitted. The fan should be mounteda minimum of 1.75 metres from the floor and less than 400mm from the ceiling.Do not install the fan above a heat source, e.g. cooker or radiator.Single phase induction motor with pre-oiled bearings fitted for a long maintenance freelife and protected by a thermal fuse.Two year no quibble guarantee.The fans are designed to be wall, window or ceiling mounted. Kits available onrequest.Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta,stone, grey or brown).Window kits comprise an external white gravity grille and internal fixing plate.Ceiling kits comprise 3m 150mm flexible ducting and an external fixed grille (coloursto suit).When installing through a wall or ceiling a 162mm hole is required, 175mm througha window.L 1000 - extract rate of 235m³/hr, 64 litres per second.Maximum pressure: 50 p.a. Fan speed: 2400 r.p.m.Sound volume: 40.0 dB(A) Maximum operating temperature 40ºC.Protection Rating – IPx4Unit Dimensions & cut outsA 206B 206C 150D 42E 54Hole sizes:wall / ceiling 162mmwindow 175mmSPECIFICATIONExtract rate atfull speedSupplyvoltageMaxwattageNoiselevelWarrantyFan Speed ColourElectronicrecalibratingsensorMax pressureDigitaldisplaySpeedoptionsDownloadfacility235m 3 /h64ltrs/sec220/230 2040db at fullspeed2 year RTB2400 at fullspeedWhite Yes 50 p.a. Yes Yes YesNOTES:Specification dependent on modelFerrob Limited, Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW; Tel: 01635 299266 Fax: 01635 299277Email: sales@ferrob.co.ukMar07