Breathing life into your environment - Ferrob

ConstructionElectricalMotorGuaranteeInstallationPerformanceAdditional DataThese fans are moulded in impact resistant high gloss ABS thermoplastics forstrength, durability and finish.220-230v ~ A.C. 50Hz Single phase consuming 24 watts. These fans aredouble insulated and do not require an earth. All wiring must comply withcurrent IEE regulations. A double pole isolating switch, having a contactseparation of at least 3mm in all poles, must be used with a 3 amp fuse fittedand mounted a minimum of 1.75 metres from the floor and less than 400mmfrom the ceiling.Do not install the fans above a heat source. e.g. cooker, radiator.Single phase induction motor with pre-oiled bearings fitted for a long maintenancefree life and protected by a thermal fuse.Two year no quibble guarantee.The ranges is designed to be wall or ceiling mounted. Kits available onrequest.Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white,terracotta, stone, grey or brown).Ceiling kits comprise 3m 150mm flexible ducting and an external fixed grille(colours to suit).Installation through a wall or ceiling requires a 162 mm hole.SL150 - extract rate of 294m³/hr, 82 litres per second.Maximum pressure: 87 p.a. Fan speed: 2400 r.p.m.Sound volume: 40.0 dB(A) Maximum operating temperature 40ºC.Protection Rating – IP34.Graph for Slimline 150 Range9080706050Pressure (Pa) 4030201000 50 100 150 200 250 300 350Extract Capacity (m3/hr)ADABØ205 mm205 mm150 mmBØCDHole sizes:150 mm15 mmwall/ceiling162 mmCFerrob Limited, Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW; Tel: 01635 299266 Fax: 01635 299277Email: sales@ferrob.co.ukNov06