Cat M312

More documents

Recommendations

Info

Lift Capacities M320 MHWith Straight Boom 6.8 m and Material Handling Stick 4.9 m, 600 kg additional counterweight.All weights are in metric tons.**Height7.50 m6.00 m4.50 m3.00 m1.50 m0.00 m-1.50 mUndercarriageconfigurationAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers down3.0 m4.5 m 6.0 m 7.5 m 9.0 m6.3 4.5 4.4 3.1 3.2 2.2 2.6 1.8*7.1 *7.1 *6.2 6.0 *5.4 4.5 *2.8 *2.86.2 4.3 4.3 3.0 3.2 2.2 2.3 1.5*7.4 *7.4 *6.3 5.9 *5.5 4.4 *2.8 *2.89.4 6.3 5.9 4.1 4.1 2.9 3.1 2.1 2.1 1.4*10.1 *10.1 *7.9 *7.9 *6.5 5.8 *5.5 4.3 *2.7 *2.78.6 5.6 5.5 3.7 3.9 2.7 3.0 2.0 2.0 1.3*11.2 *11.2 *8.4 7.9 *6.7 5.6 *5.6 4.2 *2.8 *2.87.9 5.0 5.1 3.4 3.7 2.5 2.8 1.9*11.8 *11.8 *8.6 7.5 *6.8 5.3 *5.5 4.17.4 4.6 4.9 3.2 3.6 2.3 2.8 1.8*10.8 *10.8 *8.4 7.2 *6.6 5.2 *5.2 4.04.7 3.0 3.5 2.2*7.5 7.0 *5.9 5.1m10.1010.8111.2811.53Load RadiusOver FrontLoad RadiusOver SideLoad atMaximum Reach* Limited by hydraulic rather than tipping load** Height of stick pinThe above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic liftingcapacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacitiesLift Capacities M320 MHWith Straight Boom 6.8 m and Material Handling Stick 4.9 m, 600 kg additional counterweight, “Heavy Lift” arrangement.All weights are in metric tons.**Height9.00 m7.50 m6.00 m4.50 m3.00 m1.50 m0.00 m-1.50 mUndercarriageconfigurationAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers down3.0 m4.5 m 6.0 m 7.5 m 9.0 m6.4 4.5 4.4 3.1 3.2 2.2*8.0 *8.0 *7.0 6.1 *3.8 *3.86.3 4.5 4.4 3.1 3.2 2.2 2.6 1.7*8.1 *8.1 *7.0 6.0 *6.2 4.4 *3.2 *3.26.2 4.3 4.3 3.0 3.2 2.2 2.3 1.5*8.4 *8.4 *7.2 5.9 *6.2 4.4 *3.1 *3.19.4 6.3 5.9 4.1 4.1 2.9 3.1 2.1 2.1 *1.411.4 *11.4 *9.0 8.3 *7.4 5.8 6.2 4.3 *3.1 3.08.6 5.6 5.5 3.7 3.9 2.7 3.0 2.0 2.0 1.3*12.7 12.7 *9.5 7.9 *7.7 5.6 6.1 4.2 *3.2 2.87.8 5.0 5.1 3.4 3.7 2.5 2.8 1.9*13.5 12.0 *9.9 7.5 *7.8 5.3 6.0 4.17.4 4.6 4.9 3.1 3.6 2.3 2.7 1.8*12.1 11.4 *9.6 7.2 *7.5 5.2 5.9 4.04.7 3.0 3.4 2.2*8.7 7.0 *6.8 5.1m10.1010.8111.2811.53Load RadiusOver FrontLoad RadiusOver SideLoad atMaximum Reach* Limited by hydraulic rather than tipping load** Height of stick pinThe above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic liftingcapacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities10 M318 MH and M320 MH specifications
<strong>M312</strong>, M315 and M318 Industrial ArrangementIndustrial sticksTwo boom/stick configurations areavailable for each of the M300 Familymachines. The industrial stick can beattached to either the one-piece-boom orthe hydraulically adjustable VA boomto better meet application needs.M318 wide gauge undercarriageThe wide gauge undercarriage,available for the M318, gives morestability to the machine when workingat long reach, over the side withoutstabilizers. Width of the wide gaugeaxles is 2.68 meters, making them7 percent wider than the standardundercarriage. A 2.75 meter dozerblade, compared to the standard2.5 meter blade, is also available.11
Page 1 and 2: M312/M315M318/M320Material Handler
Page 3 and 4: StructuresFor maximum strength and
Page 5 and 6: M318 MH and M320 MH Hydraulic Cab R
Page 7 and 8: Shipping dimensionsM320 MH and M318
Page 9: Lift Capacities M318 MHWith Straigh
Page 13 and 14: Transmission2-gear power-shift tran
Page 15 and 16: Working Ranges M312 One-piece-boomW

Cat M312

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?