Cat M312

Lift Capacities M318 MHWith Straight Boom 6.2 m and Material Handling Stick 4.5 m, front and rear stabilizers and standard tires.All weights are in metric tons.**Height7.50 m6.00 m4.50 m3.00 m1.50 m0.00 m-1.50 mUndercarriageconfigurationAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers down3.0 m4.5 m 6.0 m 7.5 m 9.0 m5.4 3.8 3.8 2.6 *2.1 1.9*6.3 *6.3 *5.1 4.8 *2.1 *2.1*7.8 5.8 5.3 3.7 3.7 2.6 2.7 1.9 *2.1 1.6*7.8 *7.8 *6.5 *6.5 *5.5 4.7 *4.1 3.5 *2.1 *2.1*10.4 *10.4 8.2 5.5 5.1 3.5 3.6 2.5 2.7 1.8 *2.0 1.4*10.4 *10.4 *8.6 *8.6 *6.8 6.6 *5.7 4.6 *4.8 3.5 *2.0 *2.07.6 5.0 4.9 3.3 3.5 2.3 2.6 1.8 2.0 1.3*9.5 *9.5 *7.2 6.3 *5.8 4.5 *4.8 3.4 *2.1 *2.17.0 4.4 4.6 3.0 3.3 2.2 2.5 1.7*10.0 9.4 *7.4 6.0 *5.8 4.3 *4.7 3.3*3.7 *3.7 6.6 4.1 4.4 2.8 3.2 2.1 2.5 1.6*3.7 *3.7 *9.6 9.0 *7.2 5.8 *5.6 4.2 *4.3 3.24.2 2.7*6.3 5.6m8.99.710.210.5Load RadiusOver FrontLoad RadiusOver SideLoad atMaximum Reach* Limited by hydraulic rather than tipping load** Height of stick pinThe above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic liftingcapacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacitiesLift Capacities M318 MHWith Straight Boom 6.2 m and Material Handling Stick 4.5 m, front and rear stabilizers and standard tires and“Heavy Lift” arrangement. All weights are in metric tons.**Height9.00 m7.50 m6.00 m4.50 m3.00 m1.50 m0.00 m-1.50 mUndercarriageconfigurationAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers downAll stabilizers upAll stabilizers down3.0 m4.5 m 6.0 m 7.5 m 9.0 m5.4 3.8*6.0 *6.05.4 3.8 3.8 2.6 *2.4 1.9*7.1 6.9 *5.7 4.8 *2.4 *2.48.6 5.8 5.3 3.7 3.7 2.6 2.7 1.9 *2.3 1.6*8.8 *8.8 *7.3 6.8 *6.3 4.7 *4.6 3.5 *2.3 *2.3*11.7 10.6 8.2 5.5 5.1 3.5 3.6 2.5 2.7 1.8 2.2 1.4*11.7 *11.7 *9.7 *9.7 *7.7 6.6 *6.5 4.6 *5.5 3.5 *2.3 *2.37.6 5.0 4.9 3.3 3.5 2.3 2.6 1.8 2.0 1.3*10.8 10.1 *8.2 6.3 *6.6 4.5 5.5 3.4 *2.3 *2.37.8 5.0 5.1 3.4 3.7 2.5 2.8 1.9*13.5 12.0 *9.9 7.5 *7.8 5.3 6.0 4.1*4.2 *4.2 6.6 4.1 4.4 2.8 3.2 2.1 2.5 1.6*4.2 *4.2 *11.0 9.0 *8.2 5.8 *6.4 4.2 *5.0 3.24.2 2.7*7.3 5.6m8.919.7110.2310.50Load RadiusOver FrontLoad RadiusOver SideLoad atMaximum Reach* Limited by hydraulic rather than tipping load** Height of stick pinThe above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic liftingcapacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacitiesM318 MH and M320 MH specifications9