Flexural creep of all-polypropylene composites: Model analysis

5. B. Alcock, Single Polymer Composites Based on Polypropylene:Processing and Properties, Ph.D. Thesis, QueenMary, University of London, UK (2004).6. T. Schimanski, T. Peijs, P.J. Lemstra, and J. Loos, Macromolecules,37, 1810 (2004).7. W.N. Findley, J.S. Lai, and K. Onaran, Creep and Relaxationof Nonlinear Viscoelastic Materials—With an Introductionto Linear Viscoelasticity, Dover, NY (1976).8. S. Houshyar and R.A. Shanks, Polym. Int., 53, 1752 (2004).9. S. Houshyar, R.A. Shanks, and A. Hodzic, Polym. Test, 24,257 (2005).10. S. Houshyar and R.A. Shanks, J. Appl. Polym. Sci., 105,390 (2007).11. S. Houshyar, R.A. Shanks, and A. Hodzic, Macromol. Mat.Eng., 290, 45 (2005).12. I.M. Ward, An Introduction to the Mechanical Properties ofSolid Polymers, John Wiley & Sons, West Sussex, England(1993).13. J.J. Aklonis and W.J. MacKnight, Introduction to PolymerViscoelasticity, Wiley, New York (1983).14. N. Phanthien, J. Rheol., 23, 451 (1979).15. M. Kitagawa and T. Matsutani, J. Mat. Sci., 23, 4085(1988).16. J. Kolařík and A. Pegoretti, Polymer, 47, 346 (2006).17. J. Kolařík, L. Fambri, A. Pegoretti, A. Penati, and P.Goberti, Polym. Eng. Sci., 42, 161 (2002).18. J. Kolařík, J. Polym. Sci. Part B: Polym. Phys., 41, 736 (2003).19. J. Kolařík, A. Pegoretti, L. Fambri, and A. Penati, J. Appl.Polym. Sci., 88, 641 (2003).20. J. Kolařík, A. Pegoretti, L. Fambri, and A. Penati, Macromol.Mater. Eng., 288, 629 (2003).21. P.E. Tomlins and B.E. Read, Polymer, 39, 355 (1998).22. S.C. Hunter, Mechanics of Continuous Media, Ellis Horwood,Chichester, UK (1976).23. M.M. Sain, J. Balatinecz, and S. Law, J. Appl. Polym. Sci.,77, 260 (2000).24. T.W. Strganac and H.J. Golden, Int. J. Solid Structures, 33,4561 (1996).25. J.G.J. Beijer and J.L. Spoormaker, Computers Struct., 80,1213 (2002).26. G.D. Dean and W. Broughton, Polym. Test, 26, 1068(2007).27. K.P. Menard, Dynamic Mechanical Analysis, CRC Press,Florida (1991).28. W.N. Findley, SPE J., 16, 57 (1960).29. D.A. Dillard, M.R. Straight, and H.F. Brinson, Polym. Eng.Sci., 27, 2 (1987).30. A. Saigal, V. Difilippo, and M.A. Zimmerman, J. ElectronicMater., 26, 847 (1997) .31. T. Abraham, K. Banik, and J. Karger-Kocsis, eXPRESSPolym. Lett., 1, 519 (2007).32. K. Banik, T. Abraham, and J. Karger-Kocsis, Macromol.Mat. Eng., 292, 1280 (2007).33. J. Varga, ‘‘Crystallization, Melting and SupermolecularStructure of Isotactic Polypropylene,’’ in Poly(propylene):Structure, Blends and Composites: Structure and Morphology,Vol. 1, J. Karger-Kocsis, Ed., Chapman & Hall,London, 64 (1995).948 POLYMER ENGINEERING AND SCIENCE—-2008 DOI 10.1002/pen