Protocol FlexiPOS - Vectron Systems AG

• Set status mode (from POS)
• Purpose:
• Selects mode for clerk lock and coffee machine
This command is send after the POS gets the “Login acknowledge” message.
• Contents:
• Coffee machine mode:
• 0: Normal
• 1: Binary
• Clerk lock mode:
• Format:
• 0: WITH detection of key removal
• 1: WITHOUT detection of key removal
STX = 1 byte
“VC” = 2 bytes
Coffee mach. Mode = 1 byte (‘0’ or ’1’)
Clerk lock mode = 1 byte (‘0’ or ’1’)
ETX = 1 byte
LRC = 1 byte
• Possible answers:
ACK = OK
NAK = Message invalid (format or LRC)
• Set authorisation line for coffee machine (from POS)
• Purpose:
• Selects mode for clerk lock and coffee machine
This command is send after the POS gets a “Input event” message for clerk
sign in/off.
• Contents:
• Line status:
• Format:
• 0: Offline
• 1: Online
STX = 1 byte
“VA” = 2 bytes
Line status = 1 byte (‘0’ or ’1’)
ETX = 1 byte
LRC = 1 byte
• Possible answers:
ACK = OK
NAK = Message invalid (format or LRC)
Protocol FlexiPOS Jul, 08 1999 5/5