polylux - transformer - Asia Access Limited

harmonic compensators for industrialinstallations IP-20SolutionsSERIES CSolution 1 High filtering level of harmonics 5º, 7º, 17º and 19º.Compensator C10F(4)C10F(5)(6)(7)50 %of the loadThe C10F Compensator is used in case a high filtering level is requested. The C10Fis installed in such a way that it supplies 50% of the load to be filtered while theother 50% is supplied directly.For optimised filtering and elimination of voltage notches, RTL or RTLX line inductorsshould be installed as well, especially for power converters above 5 kW.(1)(3)(2)(8)(9)Filtering results:C10F C10F + RTLReduction of phase current up to 20 % 35 %Reduction of voltage and current distortion up to 60 % 85 %Obtain P.F. factor up to 0,95 0,98(1) Transformer(2) Filtering inductor(3) Capacitor bank(4) Compensator(5) Line inductor RTL or RTLX(6) Frequency converter(7) Motor(8) PLC(9) Computer50 %of the loadNote: For selection, please consult the application guide.Solution 2High filtering level of harmonics 5º, 7º, 17º and 19º, with galvanic isolation.Compensator C20F(4)C20F(5)50 %of the loadThe C20F Compensator achieves the highest protection level for industrial installations,featuring a high filtering level and galvanic isolation of the load. The C20F has twooutputs, each supplying 50% of the load.(1)(6)(7)For optimised filtering and elimination of voltage notches, RTL or RTLX line inductorsshould be installed as well, especially for power converters above 5 kW.(2)(3)(1) Transformer(2) Filtering inductor(3) Capacitor bank(4) Compensator(5) Line inductor RTL or RTLX(6) Frequency converter(7) Motor(8) PLC(9) Computer(8)(9)50 %of the loadFiltering results:C20F C20F + RTLReduction of phase current up to 20 % 35 %Reduction of voltage and current distortion up to 60 % 85 %Obtain P.F. factor up to 0,95 0,98Note: For selection, please consult the application guide.SERIES C39