polylux - transformer - Asia Access Limited

figure 1figure 2SERIES RCast Resin InductorMAINSInductor Ref. R.OtherloadsInstallation of the inductorHarmonicgeneratingloadssingle phase cast resin line inductors IP-20Line inductors for harmonic filteringLine voltage 220 - 260 VIn (A)2,5456,381012,516202531,540506380100L (mH)REFERENCESReferenceMotor RatingkW8,7855,4914,3933,4862,745R““““2,5456,380,230,370,460,550,750,310,50,60,7512,1961,7571,3731,0980,8790,6970,5240,4390,3490,2750,220“ 10“ 12,5“ 16“ 20“ 25“ 31,5“ 40“ 50“ 63“ 80“ 1001,11,51,852,2345,56,57,511141,522,5345,57,58,7101518,7For other current values, L values or other applications, please consult.Applications: Designed for single phase harmonic generating equipment:Single phase frequency converters.Variable speed drives for DC motors.UPS systems.Power supplies.Rectifiers.Other types of converters or non-linear loads.AdvantagesReduction of current harmonics generated by the load, resulting in reduced energy consumption andpower factor improvement.Reduction of the crest factor of the current wave, extending the lifetime of the equipment and avoidingbreakdowns.Individual installation for each load is recommended in order to improve its efficiency.ReferenceR 2,5“ 4“ 5“ 6,3“ 8“ 10“ 12,5“ 16“ 20“ 25“ 31,5“ 40“ 50“ 63“ 80“ 100DIMENSIONS / WEIGHTSdimensions mmA B C D E50505075757575758496961081261261261509797979696969696102112112122145145145165848494959595951101201261261551671871872008080808080808080869696106125125125145343434565656565665777789102102102125TECHNICAL CHARACTERISTICSFrequencyLine voltageInsulation50 - 60 Hz220 - 260 VClass B - 130º CWindingsClass HC - 200º CTest voltage3 kV (1 min, 50 Hz)Voltage drop (uk) 3 % at 230 V, 50 Hz and nominal currentCoverCast resinProtection degree IP - 20Ambient temperature ta = 40º CStandardsIEC/EN/UNE-EN 60289 CEIncludesBimetal thermal protection6666666666666777hpWeightkg0,760,780,941,31,31,31,31,82,72,82,95,05,68,18,310,6Figure1111111111112222For standard inductors,see page 40.41SERIES R