12/2012 - TOX PRESSOTECHNIK GmbH & Co.KG

Control optionsl i n e -XIP54 enclosureFor axis controller assembly, includingfan or cooling unit. Specificationaccording to TOX ® standards. Specialmodels available on request (examplesee picture on page 10).Safety controlsAll the control variants described inthe following are type examinationtested.Basic controls:• Cycle initiation via 2-hand buttons.Both start buttons must be pressedduring the complete cycle.• Visualization over IPC with swivelarm to be mounted on pressframeOptions for basic controls:• Function: safe return stroke.The return stroke of a press takesplace automatically after completingthe press cycle. The start buttons donot have to be pressed during thereturn stroke.• Function: safe speed. The driveextends with a maximum speed of10 mm/s. The controls can beactivated with a 1-hand button orfoot pedal.Control for safety door:• Cycle initiation by 1-hand button orfoot pedal• The pressing process is only startedif the safety door is closedLight curtain controls:• Safety guard and control operationTwo operating modes are available:1. The light curtain has no controlfunction. Cycle initiation over1-hand button or foot pedal.2. The light curtain has a controlfunction. Cycle initiation after endof light curtain interruption(so-called Talot control)Special versions (on request):• Software integration of externalcomponents, e.g. sensors fortemperature, travel, etc.• Activation of additional movements,e.g. for a sliding table, rollingguards, etc.Industrial PC from TOX ® :The robust alternative to usual PC systemsTechnical dataTouchscreen17 inch TFT-LCDResolution 1280 x 1024Dimensionfront panelOperating systemSoftwareRAMW: 483 mmH: 356 mmWindows XPTOX ® softWare2 GB DDR-RAMProcessor 1.6 GHz, Atom N 270Hard disk160 GB HDInterfaces4x USB, rear1x USB, front2x EthernetRS232Protection class IP65 frontsideIP20 backsideAmbient temperature 0 °C ... +40 °CPower supply24 VPanel mount version:IPC for installation in a control cabinet.Wall mount version:IPC including aluminum housing withinterface for installing the swivel armsystem type CP-L.Standard version for TOX ® safety controls:IPC including aluminum housingwith operating elements.Keyboard option:Basic keyboard and keyboardmounting. Sheetmetal mounting with keyboardand integratedmouse.Keyboard option:Professional keyboard and keyboardmounting. Membrane keyboard withintegrated mouse in aluminum housing.40.201212.enwww.tox-en.com17