12/2012 - TOX PRESSOTECHNIK GmbH & Co.KG

l i n e -XAccessoriesGrease gun for re-greasing the TOX ® -ElectricDrive SystemsIt is a must for the long lasting operationof the drive.Order no.: ZFPGreasing intervals and amountaccording to the manual.Suitable for 400 g TOX ® -Specialgrease cartridge.400 g TOX ® -Special greasecartridgeOrder no.: ZFEAutomatic lubrication forTOX ® -Electric Power ModulePossible on request.Calibration equipment type ZKE© A.S.T. GmbHFor the re-calibration of the TOX ® -Electric Power Module. The intervalfor the re-calibration should be definedby the customer.ApplicationsFrom the TOX ® building blocks to customised machinesScope of delivery:- Precision force sensor 10, 50, 100and 200 kN with connection cable(1.5 m) for digital display unit- Digital display unit (handheld)- Power supply (3 possibilities)- Batteries (3 pcs.)- USB cable via PC- USB power supply- USB cable (1.8 m)- Factory calibration report- CD-ROM with operating manualand PC software- Transport casePlanning and design of completepresses and special machines.TOX ® PRESSOTECHNIK helps yousolve your production demands withthe application of specific solutionsmade with components from ourstandard product line.Robot guided clinching tongsEPMR 55 used in TOX ® -Robotic tongs TZ for joining sheet metalEPMR 55Realization of electro-mechanic pressesof utmost safety level (see page2) and tested by the GermanEmployer’s Liability Insurance Association.Application:Metal joining withTOX ® -Round Joint(see brochure: TOX ® -Joining Systems)TOX ® -Robot tongs TZ(see brochure: TOX ® -Robot Tongs)Option:Robot couplingOption:Terminal box for startingthe compensating slideand the spray lubricationequipment, and manualinitiation for spraying alubricant on to the joiningarea, if required.18www.tox-en.com40.201212.en