SERVICE MANUAL - BVT Partners OÜ

'11 • SCM-SM-110(2) Unit ON/OFF buttonWhen the remote controller batteries become weak, or if the remote controller is lost or malfunctioning, this button may beused to turn the unit on and off.(a) OperationPush the button once to place the unit in the automatic mode. Push it once more to turn the unit off.(b) Details of operationThe unit will go into the automatic mode in which it automatically determines, from indoor temperature (as detected bysensor), whether to go into the cooling, thermal dry or heating modes.Function Indoor temperatureFan speed Flap/Louver Timer Switchoperation modesettingCooling About 24ºCThermal dry About 25ºC Auto Auto ContinuousHeating About 26ºC・Model SRK20, 25, 35ZJX-S, 50, 60ZJX-S1 ・Model SRK25, 35ZJR-S, 20, 25, 35, 50ZJ-SUnit ON/OFF buttonUnit ON/OFF button・Model SRK71ZK-SUnit ON/OFF button・Model SRF25, 35ZJX-S, 50ZJX-S1・Model SRR25, 35, 50, 60ZJ-SUnit ON/OFF buttonUnit ON/OFF button(3) Auto restart function(a) Auto restart function records the operational status of the air-conditioner immediately prior to be switched off by a power cut,and then automatically resumes operations after the power has been restored.(b) The following settings will be cancelled:1) Timer settings2) HIGH POWER operationsNotes (1) Auto restart function is set at on when the air-conditioner is shipped from the factory. Consult with your dealer if this function needs to be switched off.(2) When power failure ocurrs, the timer setting is cancelled. Once power is resumed, reset the timer.(3) If the jumper wire (J170 or JA1) “AUTO RESTART” is cut, auto restart is disabled. (See next page)