Wheel of Fortune Pusher

More documents

Recommendations

Info

4.0 SecurityThe machine uses three separate tilt mechanisms to enhance security:The Alarm is a continuous two tone sound that lasts for approximately 8-10seconds.The machine is protected by three different tilt mechanisms - the Tilt Bob, theSlam Tilt and the Intelligent Tilt. The settings of each can be adjusted to altertheir sensitivity.Please note that these settings are critical to ensure game play – they must be setsensitively enough to protect the machine, but if they are set too sensitively, gameplay will be adversely affected.4.1 TILT BOB MECHANISM ADJUSTMENT.The Tilt Bob is housed in the coin entry levelof the machine.It operates under gravity by making contactbetween the metal frame and the freeswingingbob if the machine is tilted beyond apre-determined angle.To set the tilt angle, loosen the LockingScrew on the side of the bob. The bob canthen be moved up the shaft to increase theoperating angle or down the shaft to decreasethe angle. Ensure that the Locking Screw istightened following adjustment.Tilt Bob Mechanism920847 Wheel Of Fortune 12
4.2 INTELLIGENT TILTADJUSTMENTThe piezo-electric sensors and associated PCBs are secured to the underside of theWin Chutes.The sensitivity of the Intelligent Tilt mechanism can be adjusted by turning thepotentiometer VR1 on the Intelligent Tilt PCB.Turning the potentiometer anti-clockwise increases sensitivity, and turning itclockwise decreases sensitivity.To test for correct function:1. Remove the Glass Door from the Play Section.Intelligent Tilt Assembly2. Position a coin at the edge of the Playfield, as far away from the Coin FallDetector as possible (to check for maximum sensitivity).3. Gently push the coin over the edge so that it drops into the win chute, as itwould do in normal play.4. As the coin enters the win chute, visually check that the LED on the PCBlights, indicating that the coin has been detected. This will not cause the alarmto sound.If the LED does not light, turn the potentiometer anti-clockwise slightly and repeatthe test.4.3 SLAM TILT ADJUSTMENTThe Slam Tilt Switches comprise anadjustable switch with a weight mounted ona sprung arm.The switch operates if the machine is struckwith enough force to move the weight andclose the electrical contactsTightening the Adjusting Screw reduces thegap between the contacts and makes theswitch more sensitive920847 Wheel Of Fortune 13
Page 2 and 3: 1 PLAYER WHEEL OF FORTUNEOPERATOR
Page 4 and 5: 1. IT IS ESSENTIAL THAT ONLY SUITAB
Page 6 and 7: 2.0 GAME PLAY & DESCRIPTIONMarquee
Page 8 and 9: Marquee AssemblySkill Stop ButtonCo
Page 10 and 11: Stepper Motor& Fan AssyLED Lighting
Page 14 and 15: 5.0 Programmer & Dipswitch Settings
Page 16 and 17: 5.3 - Dipswitch SW1DS Default Setti
Page 18 and 19: 7.0. Routine MaintenanceDaily Inspe
Page 20 and 21: .Fluorescent Lamp Lighting & Compon
Page 22 and 23: e.Pin Perspex RemovalRemove Glass p
Page 24 and 25: g.Payout LevelAt the very bottom of
Page 26 and 27: 8920847 WHEEL OF FORTUNE 26
Page 28 and 29: 9.0. PARTS LISTSPart Code Descripti
Page 34: Part Code Description No Off9.0. PA

Wheel of Fortune Pusher

Create successful ePaper yourself

Delete template?

Save as template?