Encore Installation Instructions - RealTruck.com

Unfold front joint and position cab4 5and middle panels over truckbedmaking sure retaining hooksengage pins in drain rail.Press down on cabpanel to lock inplaceWith tailgate open, unfold tailpanel and press down ontotruckbed.Tonneau should nowbe secure.Before this step,be sure youUNLOCK thepanel latch.To Open the Cab PanelTo access storage at the front of your truckbed, turn the locking knobon the driver side of the cab panel. Be careful not to drop cab panelon center panel, it may mar panel surface. Always make sure the keyis removed and the lock cylinder cover is closed when folding cover.To unlock the knob, lift the lock cover and insert key.To Open the Tail PanelTo raise the tailgate panel, open the tailgate and reachin to the cable inside the panel housing.Pull down on the cable to release both rear latches.NOTE: Toinsure a betterseal, always closepanel before closingtailgate.DO NOT ATTEMPTTO DRIVE WITHCOVER IN THESEPOSITIONS!Remove any snow or foreignmatter before folding cover.Secure the Encore cover with attached clips.YOU MAY DRIVE WITH THE COVER INTHIS POSITION.Extang Corporation, 1901 E. Ellsworth Rd., Ann Arbor, MI 48108, 734 677-0444, Fax: 734 677-8409, Visit us at: www.extang.com