12.07.2015 Views

GoldLine - Elterm

GoldLine - Elterm

GoldLine - Elterm

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

8SETTINGSSETTINGSATTENTION!!!!Boiler connected to the installation according to point II ELECTRICALASSEMBLY. CH (HUW) pump should be turned on for III speed. Valves onradiators should be completely open while start-up.3JEZYKPOLSKIENGLISHOKLANGUAGE1. Red diode on – no. 20, boiler stand-by – boiler turned on.2. For 5 s. Press button: Green diode no. 19 turns on.JEZYKPOLSKIENGLISHOKLANGUAGE3. Choose language POLSKI / ANGIELSKI (ENGLISH).– choose ENGLISH– back to POLISH– OK. Confirm language selection.4Venting4. On LCD – sign „venting + progress bar”. One cannot skip this part. CH(optionally HUW) pump turns on – there is no possibility to disconnectheaters. Those 5 minutes should be sufficient to vent whole systemincluding boiler and pump. In case however another venting is essentialplease repeat previous step.5c11:53:3312 05 2011 THUc1234565. On LCD – information according to description on page 7.1I – INITIAL SETTINGS:1 CH and HUW (concerns AsD-W and AsDC-W boilers only) temp. setting– press 1 time, enter function:HUW50CH50– go to CH setting– get back to HUW settingHUW.CHCONTROL PANEL5050CH and HUW temperatures are set in the same way.ESCONOFF

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!