RFID Antenna Solutions - Mobile Mark

Francin, le 16 mars 2012La saison retrouve une trajectoire convenable,après de bonnes vacances d’hiverDe bonnes vacances d’hiverDans presque tous les massifs, les vacances d’hiver ont connu une fréquentation sur les domainesskiables supérieure à la moyenne des quatre derniers hivers.A la faveur d’un enneigement complété par des chutes de neige en début de période, la clientèle aprofité pleinement des pistes de ski sous un généreux soleil.C’est dans le Massif Vosgien, le Massif Central, le Massif Jurassien et dans les Pyrénées que lesvacances d’hiver ont connu les plus fortes progressions au regard de cette moyenne.Fréquentation pour la période des vacances d’hiver et en cumul depuis le début de la saisoncomparée à la moyenne des quatre précédents hivers1

Key issues• There is not currently a complete local healthy weight care pathway inplace (from prevention, including aspects such as planning andtransport, through to tiered weight management support at differentlevels and bariatric surgery assessment and intervention). NHStransition will require an effective partnership approach to ensure sucha pathway can be established and competing priorities will need to beaddressed to access an appropriate level of investment.• Adequate capacity to address elements.Recommendations for consideration by commissionersObesity• Commission Tier 2 and Tier 3 adult weight management services toensure a complete healthy weight care pathway.• Commission healthy weight services for women before, during andafter pregnancy and agree a body mass index (BMI) threshold which isconsistent with all three trust providers to trigger consultant led care.Physical activity• Improve participation in physical activity, particularly in groups whereuptake is lower (females, post 16 drop off, older people, and peoplewho are classified as being from poorer socio-economic groups).• Lack of physical activity services for patients with long term conditions.• The need for primary care to screen all adults (16years+) for physicalinactivity and signpost to appropriate interventions.Commission adequate capacity to ensure that services can deliver support forthe risks associated with obesity and physical inactivity as identified throughNHS Health Checks.1) Who is at risk and why?Obesity• It is well documented that people who are overweight and obeseincrease the risk of a range of diseases that can have a significanthealth impact on individuals. Obesity is associated with type 2 diabetesand hypertension - which are major risk factors for cardiovasculardisease and cardiovascular related mortality. Obesity has also beenassociated with cancer, disability and reduced quality of life, and canlead to premature death.• The lifespan of an obese person with a BMI between 30 and 35 is twoto four years shorter than that of a person of normal weight. The gapincreases to eight to ten years for those who are severely obese (BMIof 40-45), mirroring the loss of life expectancy suffered by smokers.(Prospective Studies Collaboration, 2009).2

US Office: Tel: 800-648-2800 or +1.847-671-6690UK Office: Tel: (+44) 1543 459555www.mobilemark.comPanel Antennas8 dBic RFID• Models for either US or EU applications• 8 dBic gain is the maximum allowablegain for general RFID applications• Mounting hardware allows vertical tiltadjustment of up to 24-degreesPN8 Series,8 dBic gain• Mid-range coverage, such as in awarehouse settingMobile Mark offers 8 dBic RFID Patch Antennas for both the 868 MHzand 915 MHz bands.Frequency bands vary by region. US models cover 902-928 MHzwith Right Hand Circular Polarity. Models for Europe and manyother parts of the world cover 865-870 MHz with Left Hand CircularPolarization.The Patch Antenna is intended for mid-range to long-range coverage,such as in a warehouse setting. The antenna offers 8 dBic gain with abeamwidth of 70-degrees elevation and 70-degrees azimuth.The unique high efficiency design provides a broadband match, makingit possible to maintain the VSWR at 1.5:1 typical and 2:1 max, overthe entire range.The rugged radome and heavy aluminum back plate make it wellsuited for industrial applications. The ASA radome is both impactresistant and UV resistant.The antenna is operational from -40°to +85° Celsius and can handlea maximum power of 20 watts.The PN8 Series antenna is relatively compact for the gain. It measures9” x 9” x 1.6” (23 cm x 23 cm x 4 cm) and is typically suppliedwith 1-foot of RG-58 cable with an SMA connector.SpecificationsFrequency:EuropeUSGain:Polarization:868 MHz systems LHCP915 MHz systems RHCPAxial Ratio:Beamwidth:ElevationAzimuthImpedance:865-870 MHz902-928 MHz8 dBic3 db Max70 degrees70 degrees50 ohmsConnectors may vary per customer request.The antenna is pipe mounted with a rugged L-bracket and U-Boltmounting kit. This allows for a secure and easy installation. A slot inthe standard mounting bracket allows for vertical tilt adjustment of upto 24-degree.The PN8 Series has a DC shorted front end and is compatible withantenna sensing circuits found in the current generation of RFIDreaders.If your reader has a feature that requires a 10K ohm resistor, the PN8antenna can be special ordered with this feature.Model #PN8-915RCP-1C-GRY-12PN8-868LCP-1C-GRY-12PN8-915-10K-1C-GRY-12PN8-868-10K-1C-GRY-12Frequency902-928 MHz865-870 MHz902-928 MHz865-870 MHzNote: models specified above indicate 1 foot of cable and anSMA male connector (e.g. -1C). Model number will change tospecify a different cable length or connector. Contact your salesrepresentative for other connector options.Cable:Black RG-58, 1 ft (30.4 cm)Case: 9” x 9” x 1.6”(23 cm x 23 cm x 4 cm)VSWR:1.5:1 typical2:1 max over rangeMaximum Power:20 WattsCase Material:Grey UV Resistant ASAConnector:SMA Male (Plug)Mounting:Pipe mounting; L-Bracketwith U-BoltMounts up to 2.5” diam 5.1 cmOperating Temp:-40° to +85° C98Specifications subject to Change without notice (6/2013)

US Office: Tel: 800-648-2800 or +1.847-671-6690UK Office: Tel: (+44) 1543 459555www.mobilemark.comPN10-915RCPPole Mount ConfigurationPanel Antennas10 dBic, RFID & ISM• Weatherproof radome; perfect for inbuilding& outdoor coverage• 10 dBic panel model for long range systems• Low Profile ABS radome is aesthetic anddurable• Pole or wall mount makes installationeasy and quickMobile Mark’s High gain Panel Antenna is perfect for long range 915MHz, 868 MHz RFID, as well as other applications in the 915 ISMband.The PN10 Series has a 10K ohm resistor and is compatible with antennasensing circuits found in the current generation of RFID readers.The Panel model PN10-915 is available with right hand or left handcircular polarization. With its high 10 dBic gain, this antenna is veryuseful for longer range systems. Also, with a narrower beamwidth, itcan be quite effective in reducing interference issues.For an ISM 915 application, the narrow beamwidth and circular polarizationcan overcome interference issues from other potential ISMtransmitters. Units would normally be used in pairs for a true pointto-pointlink. If used singularly with a linearly polarized antennamate, full range performance will not be achieved.The PN10 Panel is 12.25” square (311 mm), and housed in an attractiveweatherproof grey ABS radome. It is provided with a dualpurpose swivel wall/pole mount and U Bolts. Mounted parallel to awall, it stands off 6.25 inches (159 mm).This antenna terminates with a 1 ft pigtail (30 cm) of RF-195 cableand an N female connector.Model #PN10-915RCP-3Y-GRY-12PN10-915LCP-3Y-GRY-12PN10-868LCP-3Y-GRY-12PN10-868RCP-3Y-GRY-12Description(US) RFID(US) RFID(EU) RFID(EU) RFIDSpecificationsFrequency:PN10-915RCPPN10-868LCPGain:Axial Ratio:Polarization:VSWR:Impedance:Maximum Power:Operating Temp:902-928 MHz865-870 MHz10 dBic3 dB MaxRHCP & LHCP2:1 max over range50 Ohm nominal10 Watts-40 o C to +85 o CLightning Protection:Mounting:Antenna Radome:Radome Size:Weight:External recommendedFlush Wall mount &pole mounting (U-Bolts)Mounts up to 2.5” diam 5.1 cmGrey UV resistant ABS12.25”H x 12.25”W x 3.5”D(311mm x 311mm x 89mm)3.0 lbs (1.36 kg)Beamwidth:Front-to-Back ratio:56 o elevation, 56 o azimuth20 dBTermination:1 ft (30 cm) RF-195 &N Jack (Female) connector99Specifications subject to Change without notice (6/2013)

US Office: Tel: 800-648-2800 or +1.847-671-6690UK Office: Tel: (+44) 1543 459555www.mobilemark.comCable Assemblies &Connectors• Custom RF cable assemblies built toorder• Variety of styles & connectors availableCustom CoaxCable Assemblies• Provides extension capability tostandard antennas configurations• Quality low lossMobile Mark manufactures custom cable assemblies. All standardcable assemblies/ connectors are 50 Ohm. Standard production leadtimes are typically 2 weeks. Longer lead times may apply to some.RG-174 (8216) is a very small (approx. 0.1”/2.5 mm) flexiblecable best suited for mobile/portable applications up to 1900 MHz. Itcan be used in short runs up to 2.7 GHz. For miniature sized connectorsit has the widest options available.LMR-100A is the low loss alternative for RG-174. It has the samesize diameter (0.1 inch or 2.5 mm) and can be used with the samerange of connectors. The cable is well shielded but is still flexible andeasy to handle.RG-58 (8240) is the work horse cable and is suitable for applicationsup to 2.7 GHz. It is best suited for cable runs under approximately20ft (6 meters).RF-195 (7806R) is the same size cable as RG-58, and uses thesame size connectors, with the added feature of lower cable losses.RF-195 would be suitable for cable runs over 15 ft (4.5 meters) or inhigh frequency applications up to 6 GHz. This is our standard cablefor applications above 2.5 GHz.LMR-195FR is a non-halogen (non-toxic), low smoke, fire retardantcable. It has the same diameter as RF-195, can be fitted with the samevariety of connectors, and has the same cable loss.LMR-240 is a lower loss cable than RF-195 and best suited forlonger cable runs from 20 ft - 50 ft (6 meters - 15 meters) as well asfor higher frequency applications up to 6 GHz or more.LMR-400 is suitable for long runs & higher frequency applications.Approximately 0.405” diameter (10 mm), it might be too large forsome mobile installs, but is perfect for every base station transmitteror access point. Longer lead times may apply.LMR-600 is the lowest loss cable we offer. It is a premium low losscable. It is suitable for base station installations where the antennamay be mounted on a tower with long runs of cable.Cable Type Loss Per ft. at Loss Per ft. at Loss Per ft. at Loss Per ft. at900 MHz 2000 MHz 2500 MHz 5000 MHzRG-174 0.32 dB 0.49 dB 0.55 dB NRLMR-100A 0.22 dB 0.30 dB 0.39 dB 0.50 dBRG-58 0.14 dB 0.21 dB 0.24 dB 0.43 dBRF-195 0.10 dB 0.15 dB 0.17 dB 0.25 dBLMR-195FR 0.10 dB 0.15 dB 0.17 dB 0.25 dBLMR-240 0.07 dB 0.10 dB 0.12 dB 0.17 dBLMR-400 0.04 dB 0.06 dB 0.07 dB 0.12 dBLMR-600

US Office: Tel: 800-648-2800 or +1.847-671-6690UK Office: Tel: (+44) 1543 459555www.mobilemark.comCable StripperSurge ArrestorHole Saw(drill bit)Ground Plane KitInstallation & ProtectionOptions• Installation hardware: Crimp tools,adapters & cable weathersealing• RF Coax Surge Protector products frompopular manufacturersCrimp ToolsConnector SealingTapeMastic SealingKits• Proven name brand/OEM productsConnectorAdaptersCrimp Dies• Easy, one-stop shopping for antennas &accessories.In addition to our world class line of antenna products, Mobile Markcan supply a variety of accessories to ease installation and provideprotection features. We offer several OEM and name brand products.Lightning/Surge ArrestorsWe offer several name brand surge arrestor products. Surge arrestorsare important to protect your entire radio system. Surge arrestorstypically won’t save the antenna in a direct lightning strike, they areintended to protect more expensive equipment down stream. TheSurge Arrestors are generally configured by operating frequency.Special Vehicle Install HelpersMany of the popular antennas require a 3/4” hole for mounting. Toeasily make a hole, utilize a 3/4 hole saw on a drill bit to make a quickand clean installation. Some antennas require a ground plane, aslisted in the spec sheets. We offer a ground plane disc for antennasthat are mounted to a plastic or fiberglass surface. The ground planedisc is available in several hole sizes.Crimp Tools & Cable StrippersFor attaching or replacing your own cable connectors, a ratchet crimptool is offered. The standard crimp tool accepts various hex dies. Thedies needed depend on the type/size of cable you are using. We offerthe dies for our most popular cable types. A quick spinning cablestripper is an almost effortless way to properly prepare cable forcrimping a connector. They are designed to prep cable more preciselythan using a hand strip tool.Cable/Connector SealingIf you are using a product outdoors, it is always a good idea to useone of the mastic kits designed to seal up connector/cable junctions.Even if the connector is used in a seemingly protected environment,condensation can cause moisture to buildup in connectors. Overtime, that moisture can move into cable and reduce the performancesignificantly.RF Connector AdaptersSometimes a quick change is needed for an existing antenna or cableto interface with a different connector. RF adapters provide a quickway of changing the connecting style to exactly what you need. RFadapters have negligible signal losses, so there is nothing better for aquick solution. Also, data applications may require special adapters6to interface to an external antenna. We also offer a variety of jumpercable adapters to suit your needs.ModelDescriptionLightning& Surge ArrestorsACC-GT-NFF-ALGas Tube Surge Arrestor, 0-7 GHz, N Jack(Female-Female)ACC-TW-LP-005N Lightning Arrestor 0 - 6 GHz, N Bulkhead(Female-Female)ACC-AL-LSXMSurge Protector 2 - 6 GHz, N Jack(Female-Female)Special Vehicle Install HelpACC-HSK193/4” Hole saw/drill bitACC-K332Ground plane disc, 6” DVarious Hole Sizes AvailableCrimp Tools & Cable StrippersACC-RFA-4005-20 Crimper Hand set (no die)ACC-RFA-4005-01 Crimper Die for RG-58/RF-195ACC-RFA-4005-09 Crimper Die for RG-174/LMR-100ACC-RFA-4005-14 Crimper Die for LMR-400ACC-1258Cable Stripper RG-174/LMR-100ACC-HTA-312BCable Stripper for RG-58/RF-195ACC-15035WSCable stripper for RG-8/LMR-400Cable/Connector SealingACC-22281 in x10 ft Fusion Sealing tape (roll)ACC-RVS-11Roll-on mid cable Seal (Rayvolve)ACC-FT3430Fusion Bond tape 3/4” x 30 ft rollACC-WK-UUniversal Weatherproofing KitConnector Adapters770-000-0-010 TNC Jack to SMA Plug Adapter770-000-0-012 TNC Jack to Rev Polarity TNC Plug770-000-0-009 TNC Jack to N Plug Adapter770-000-0-008 SMA Jack to N Plug Adapter 0-7 GHz770-000-0-011 SMA Jack to N Plug Adapter 0-4 GHzSome models may only be available from the USA.Contact your sales representative for a full list of adapters.Specifications subject to Change without notice (6/2013)

US Office: Tel: 800-648-2800 or +1.847-671-6690UK Office: Tel: (+44) 1543 459555www.mobilemark.comMounting Accessories &Options• Universal Wall Mounts available instandoffs of 2.5 inches to 1 ft. (6 - 30 cm)Universal WallMount 2.5”StandoffUniversal WallMount 4”StandoffUniversal WallMount 12”Standoff• Truck mirror and trunk lid mountsavailable for Stud mount antennas• Wall/Pole mount adapts stud antennasto fixed base station/access point• L bracket simplifies mounting of ODSeries antennas to a wallTruck MirrorMount for StudAntennasPole Mount forStud AntennasTrunk LidMount StudAntennasWall Mountfor OD SeriesAntennaUniversal Base Station Wall MountsThese universal wall mounts can be used with any model antennathat provides pole mounting hardware. Each kit comes with 2 wallmount brackets and a unifying 2” OD pole (51 mm). Standoffs areavailable for 2.5”, 4” and 12” distances. The 12” stand off versionsupplies an additional support leg for proper strength.Pole Mount Adapter KitThe model RM-MK wall and pole mount can be used to adapt a studmount antennas for used as a fixed access point. The kit can accommodateantennas with stud diameter up to 3/4” and is supplied witha 2.75” ground plate.Universal MountThe NT-MK L-bracket mount can be used for a number of differentmodels, including many of the site antennas.Truck Mirror MountThe Truck Mirror Mount (Model SM-MM) can be used to adapt mostof Mobile Mark’s Stud mount antennas for truck side mirror mounting.The ground plate is 2 3/4” diameter (70 mm) aluminum and themounting hole can accommodate up to 3/4” stud (19 mm).Trunk Lid Mount AdapterThe model SM-TM provides vehicle trunk (or hood) lid mounting forour stud mount antennas. The SM-TM provide mounting U shapedtangs (with set screws), that wrap around the trunk surface/weatherstrip.The ground plate is 2 3/4” round (70 mm), and can accommodatea stud size of up to 3/4” (19 mm).Wall Mount - OD SeriesThe model OD-WMK is a simplified L shaped bracket to mount theOD Series antennas to a wall. The aluminum bracket provides a 5”standoff from the wall, and is supplied with U Bolts for accommodatingthe 1” diameter (25 mm) of the OD body.Replacement kitsReplacement kits are often requested to make it easier to move an7antenna from one installation to another. In particular, the re-installtape kit for the MM3 glass mount antennas facilitates re-installation.Note: Some mounting accessories & kits may only be availabe fromthe USA.Model #DescriptionUniversal Base Station Wall MountsACC-83052.5” stand off (6 cm) wall mount with poleACC-1026434” stand off (10 cm) wall mount with poleACC-10302412” stand off (30 cm) wall mount with poleWall MountPN-WMKNLM-WMAdjustable wall mount for panelsWall mount for NLM SeriesWall/Pole Mount AdapterRM-MKWall & Pole adapter kit for stud mnt. antennasBP-MKPole/Wall mount for BP SeriesUniversal Pole Mount/Wall MountNT-MKL-bracket mountMobile MountSM-TMSM-MMOmni Series MountsOD-WMKOD-MKPipe MountNLM-PMYAG-PMKReplacement KitMM-KPN-MKVehicle Trunk lid mount with ground plateTruck Mirror mount, with ground plateL Bracket for wall mounting OD Series antennasStandard Pole mount; Fits mast up to 2.5” ODPole mount for NLM SeriesPole mount for YAGI antennasMM3 Re-install tape kitReplacement mount for PS SeriesSpecifications subject to Change without notice (6/2013)