RFID Antenna Solutions - Mobile Mark

More documents

Recommendations

Info

US Office: Tel: 800-648-2800 or +1.847-671-6690UK Office: Tel: (+44) 1543 459555www.mobilemark.comPanel Antennas8 dBic RFID• Models for either US or EU applications• 8 dBic gain is the maximum allowablegain for general RFID applications• Mounting hardware allows vertical tiltadjustment of up to 24-degreesPN8 Series,8 dBic gain• Mid-range coverage, such as in awarehouse settingMobile Mark offers 8 dBic RFID Patch Antennas for both the 868 MHzand 915 MHz bands.Frequency bands vary by region. US models cover 902-928 MHzwith Right Hand Circular Polarity. Models for Europe and manyother parts of the world cover 865-870 MHz with Left Hand CircularPolarization.The Patch Antenna is intended for mid-range to long-range coverage,such as in a warehouse setting. The antenna offers 8 dBic gain with abeamwidth of 70-degrees elevation and 70-degrees azimuth.The unique high efficiency design provides a broadband match, makingit possible to maintain the VSWR at 1.5:1 typical and 2:1 max, overthe entire range.The rugged radome and heavy aluminum back plate make it wellsuited for industrial applications. The ASA radome is both impactresistant and UV resistant.The antenna is operational from -40°to +85° Celsius and can handlea maximum power of 20 watts.The PN8 Series antenna is relatively compact for the gain. It measures9” x 9” x 1.6” (23 cm x 23 cm x 4 cm) and is typically suppliedwith 1-foot of RG-58 cable with an SMA connector.SpecificationsFrequency:EuropeUSGain:Polarization:868 MHz systems LHCP915 MHz systems RHCPAxial Ratio:Beamwidth:ElevationAzimuthImpedance:865-870 MHz902-928 MHz8 dBic3 db Max70 degrees70 degrees50 ohmsConnectors may vary per customer request.The antenna is pipe mounted with a rugged L-bracket and U-Boltmounting kit. This allows for a secure and easy installation. A slot inthe standard mounting bracket allows for vertical tilt adjustment of upto 24-degree.The PN8 Series has a DC shorted front end and is compatible withantenna sensing circuits found in the current generation of RFIDreaders.If your reader has a feature that requires a 10K ohm resistor, the PN8antenna can be special ordered with this feature.Model #PN8-915RCP-1C-GRY-12PN8-868LCP-1C-GRY-12PN8-915-10K-1C-GRY-12PN8-868-10K-1C-GRY-12Frequency902-928 MHz865-870 MHz902-928 MHz865-870 MHzNote: models specified above indicate 1 foot of cable and anSMA male connector (e.g. -1C). Model number will change tospecify a different cable length or connector. Contact your salesrepresentative for other connector options.Cable:Black RG-58, 1 ft (30.4 cm)Case: 9” x 9” x 1.6”(23 cm x 23 cm x 4 cm)VSWR:1.5:1 typical2:1 max over rangeMaximum Power:20 WattsCase Material:Grey UV Resistant ASAConnector:SMA Male (Plug)Mounting:Pipe mounting; L-Bracketwith U-BoltMounts up to 2.5” diam 5.1 cmOperating Temp:-40° to +85° C98Specifications subject to Change without notice (6/2013)
US Office: Tel: 800-648-2800 or +1.847-671-6690UK Office: Tel: (+44) 1543 459555www.mobilemark.comPN10-915RCPPole Mount ConfigurationPanel Antennas10 dBic, RFID & ISM• Weatherproof radome; perfect for inbuilding& outdoor coverage• 10 dBic panel model for long range systems• Low Profile ABS radome is aesthetic anddurable• Pole or wall mount makes installationeasy and quickMobile Mark’s High gain Panel Antenna is perfect for long range 915MHz, 868 MHz RFID, as well as other applications in the 915 ISMband.The PN10 Series has a 10K ohm resistor and is compatible with antennasensing circuits found in the current generation of RFID readers.The Panel model PN10-915 is available with right hand or left handcircular polarization. With its high 10 dBic gain, this antenna is veryuseful for longer range systems. Also, with a narrower beamwidth, itcan be quite effective in reducing interference issues.For an ISM 915 application, the narrow beamwidth and circular polarizationcan overcome interference issues from other potential ISMtransmitters. Units would normally be used in pairs for a true pointto-pointlink. If used singularly with a linearly polarized antennamate, full range performance will not be achieved.The PN10 Panel is 12.25” square (311 mm), and housed in an attractiveweatherproof grey ABS radome. It is provided with a dualpurpose swivel wall/pole mount and U Bolts. Mounted parallel to awall, it stands off 6.25 inches (159 mm).This antenna terminates with a 1 ft pigtail (30 cm) of RF-195 cableand an N female connector.Model #PN10-915RCP-3Y-GRY-12PN10-915LCP-3Y-GRY-12PN10-868LCP-3Y-GRY-12PN10-868RCP-3Y-GRY-12Description(US) RFID(US) RFID(EU) RFID(EU) RFIDSpecificationsFrequency:PN10-915RCPPN10-868LCPGain:Axial Ratio:Polarization:VSWR:Impedance:Maximum Power:Operating Temp:902-928 MHz865-870 MHz10 dBic3 dB MaxRHCP & LHCP2:1 max over range50 Ohm nominal10 Watts-40 o C to +85 o CLightning Protection:Mounting:Antenna Radome:Radome Size:Weight:External recommendedFlush Wall mount &pole mounting (U-Bolts)Mounts up to 2.5” diam 5.1 cmGrey UV resistant ABS12.25”H x 12.25”W x 3.5”D(311mm x 311mm x 89mm)3.0 lbs (1.36 kg)Beamwidth:Front-to-Back ratio:56 o elevation, 56 o azimuth20 dBTermination:1 ft (30 cm) RF-195 &N Jack (Female) connector99Specifications subject to Change without notice (6/2013)
Page 1 and 2: Francin, le 16 mars 2012La saison r
Page 10 and 11: US Office: Tel: 800-648-2800 or +1.
Page 12: US Office: Tel: 800-648-2800 or +1.

RFID Antenna Solutions - Mobile Mark

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?