SMATV Noise generator Ref. 5930
SMATV Noise generator Ref. 5930
SMATV Noise generator Ref. 5930
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SMATV</strong><br />
17<br />
<strong>Noise</strong> <strong>generator</strong><br />
<strong>Ref</strong>. <strong>5930</strong><br />
The noise <strong>generator</strong> can be powered by an mains adaptor, or by the meter via an RF cable. In order<br />
to do this simply select the pre-amplifier powering in the meter's corresponding menu.<br />
To access the pre-amplifier powering menu in the field strength meter, you can follow these steps:<br />
In the terrestrial band:<br />
CONFIG.<br />
MEASURE<br />
In the satellite band:<br />
CONFIG.<br />
MEASURE<br />
Or, press the fast button<br />
This will open the Powering window:<br />
PREAMPLIF.<br />
LNB &<br />
PREAMPLIF.<br />
It is advisable to select the power measurement in the FSM when working with the noise <strong>generator</strong>.<br />
Application examples:<br />
LNB<br />
A few applications of the noise <strong>generator</strong> are briefly explained below:<br />
1.- Checking the condition of a section of the cable before installing: By using the noise <strong>generator</strong><br />
and the FSM field meter it is possible to check the condition of a section of the cable<br />
before installing it.<br />
ENGLISH
Change language