29.11.2012 Views

Phased Array Ultrasonic Probe Catalog Phased Array ... - Tecsud

Phased Array Ultrasonic Probe Catalog Phased Array ... - Tecsud

Phased Array Ultrasonic Probe Catalog Phased Array ... - Tecsud

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

14<br />

Integrated Wedge <strong>Probe</strong>s<br />

Advantages<br />

5L16-45SW1<br />

• <strong>Probe</strong> and wedge in the same housing<br />

• The lowest-profile probe-and-wedge combination for contact angle<br />

beam inspection.<br />

• Coupling always good between probe and wedge interfaces, no<br />

need for couplant between the probe and wedge<br />

• Very small assembly for easy access in restricted areas<br />

• Inspections of 30° to 70° in steel, SW or LW<br />

• Easy to handle<br />

• <strong>Probe</strong>s with an internal wedge can be specially ordered to fit a specific<br />

curvature radius.<br />

Typical Applications<br />

• Manual weld inspection of 6.35 mm to 19 mm (0.25 in. to 0.75 in.)<br />

thick surfaces (butt joints, corner joints, tee joints), using 40° to 70°<br />

simultaneously<br />

• Manual inspection of stress corrosion cracking<br />

<strong>Probe</strong> Specifications and Dimensions<br />

Part number<br />

Frequency<br />

(MHz)<br />

Number of<br />

elements<br />

Pitch<br />

(mm)<br />

Active<br />

aperture (mm)<br />

Note: Dimensions listed herein are approximate and are not to be used for design purposes.<br />

Elevation<br />

(mm)<br />

H<br />

W<br />

W1 casing<br />

Nominal<br />

refracted beam<br />

angle in steel<br />

L<br />

External dimensions<br />

mm (in.)<br />

L W H<br />

2.25L16-45SW1 2.25 16 0.75 12.0 12 45° SW 30 (1.18) 15 (0.59) 31 (1.22)<br />

2.25L16-45LW1 2.25 16 0.75 12.0 12 45° LW 30 (1.18) 15 (0.59) 31 (1.22)<br />

5L16-45SW1 5.0 16 0.60 9.6 10 45° SW 30 (1.18) 15 (0.59) 31 (1.22)<br />

5L16-45LW1 5.0 16 0.60 9.6 10 45° LW 30 (1.18) 15 (0.59) 31 (1.22)<br />

These probes come standard with an OmniScan ® Connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!