recommendation for the installation of profibus and worldfip ... - CERN

Appendix 2 :1- Preparation of the cables.Connection of fieldbus cable(Extracted from the " FIPIO Reference Handbook ")• draw the cable over a length of approximately 5 cm,• Cut the braid at the level of the ground connection,• Set up the ground connection collar (the position of the collar on the cable musttake account of its fixing in the connector, on the right or on the left of the cable),• divide the strip iron and the colourless snap rings to release the conductors,• strip each conductor over a length of approximately 5 mm and equip them withthe ends provided.15