Download (5.6 MB) - Prolyte Group

Assembly Manual Prolyte Roof and outdoor structuresRead this manual carefully and understand all of it’s contents before you assemble the Prolyte Roof and outdoor structures1.2 ASSEMBLING INSTRUCTIONS ARC-ROOF 10x81) Assemble both up-downstage spans out of square H30V-trussing on the left and right sides ofthe construction (fig. 1).8397339246939245(fig 1)2) Assemble the arches. Make sure you put spacers (item no: 17 ) in between the joint of each arch.A special spacer with keder (item no: 18) is supplied for those chords which hold a keder.3) After the arches are assembled mount them between the side spans. Make sure that the keder profile onthe front arch sits on the outside. For the arches in middle and back the keder profile should sit at the backchord of the truss (fig. 2).2x17+ 1x18 2x17+ 1x1816161616(fig 2)PROLYTE PRODUCTS GROUP © 2009Prolyte has made every effort to ensure the accuracy of this manual, no liability will be accepted for errors.Prolyte reserves the right to change or alter their products or manuals without prior notice.No part of this manual may be reproduced in any form or by any means without prior written permission.PROLYTE PRODUCTS GROUP - phone +31 (0)594 85 15 15 - fax +31 (0)594 85 15 16 - www.prolyte.compage 5