Download (5.6 MB) - Prolyte Group

Assembly Manual Prolyte Roof and outdoor structuresRead this manual carefully and understand all of it’s contents before you assemble the Prolyte Roof and outdoor structures4) Then mount the canopy support tubes (item no 19) as shown in fig 3.191919(fig 3)5) Take the ratchet-straps (item no 19) or steel wires and spanners (item no 35 + 36) and attach them to theeyes, which are welded in the corners and on the middle of each arch (see detail 1 & 2 below). Put themslightly and simultaneously under tension, t.i about 50 daN (= 50 kgf).c-c holes4436mmc-c holes4276mm26 or36+37Detail 1Detail 2Detail 1Detail 2(fig 4)page 6PROLYTE PRODUCTS GROUP © 2009Prolyte has made every effort to ensure the accuracy of this manual, no liability will be accepted for errors.Prolyte reserves the right to change or alter their products or manuals without prior notice.No part of this manual may be reproduced in any form or by any means without prior written permission.PROLYTE PRODUCTS GROUP - phone +31 (0)594 85 15 15 - fax +31 (0)594 85 15 16 - www.prolyte.com