Download (5.6 MB) - Prolyte Group

Assembly Manual Prolyte Roof and outdoor structuresRead this manual carefully and understand all of it’s contents before you assemble the Prolyte Roof and outdoor structures6) Pull the canopy through the keder profiles on top of the arches. Make sure this is done evenly and with care.To facilitate this processes use some Teflon spray on a regular basis. Also make sure that the keder profile ismaintained. Burrs, damages or sharp edges will damage the canopy and reduce the life span dramatically.Canopy 21Canopy 20(fig 5)7) Put the tubes through the sleeve in the canopy and attach the ratchets as shown in fig. 4.Put the ratchet slightly under tension, not exceeding 50kgf per ratchet. There is no need to transfer thecanopy into a drum skin.Canopy 20 and 21Tube 23 and 24(fig 6)SleeveRatchet 22PROLYTE PRODUCTS GROUP © 2009Prolyte has made every effort to ensure the accuracy of this manual, no liability will be accepted for errors.Prolyte reserves the right to change or alter their products or manuals without prior notice.No part of this manual may be reproduced in any form or by any means without prior written permission.PROLYTE PRODUCTS GROUP - phone +31 (0)594 85 15 15 - fax +31 (0)594 85 15 16 - www.prolyte.compage 7