Vector 990 Owner's Manual - Beltronics

VECTOR 990 International provides more user Selectable Featuresthan Includes any other 16 detector Driver on Selectable the market. Selectable Features Features allow youto “customize” how alerts will be presented to you.5 Operating Modes 11 General Features5 Operating Modes 11 General Selectable FeaturesNormal Mode1. NORMAL ModeModifications Mode1. X Band (10.525 GHz)A lengthy power up testQuick-Startsequence; text messages identify X Band (10.525ON orGHz)OFFOn/Offalerts received, i.e. “X Ba n d ”. 2. K Band (24.150 GHz)Tech Mode2. MODIFICATIONS Mode ON or OFFVoltage Full Power-up Meter test sequence; Mode K Band (24.125 GHz) On/Offpresents ONLY those General 3. Super Wideband KaSuper Wideband Ka (33.4-36.0)Selectable Features which you(33.4 – 36.0 GHz)have altered from factory pre-set. AccuSweep ON or OFFText messages identify alerts received.Operating modes are4. AccuSweep ON or OFFSelected3. QUICKusingSTARTPWRModeNo test sequence; unit immediately Button 5. AutoMute ON or OFFSee shows page last 00. used traveling6. Radar/Laser Digitalmode:“Au t o Sc a n ”, AutoMute Voice On/Off Prompts ON or OFF“Hi g h w a y ”, “Cit y X”“Cit y ALL”, Text messages Radar/Laser 7. Safety Digital Warning VoiceSystem identify alerts received. Prompts On/Off ON/OFF4. TECH Mode Safety 8. Warning Safety System Warning On/Off System Full Power-up text sequence.Text messages identify band received Safety Warning Digital System Voice ON Digital or OFFfollowed by ACTUAL police traffic Voice or 9. Tone Audio/Visual Scroll Rate:radar or Laser frequency, i.e., Audio/Visual FAST Scroll or SLOW Rate“24.150” to confirm K band. Fast/Slow 10. Inverted Display Option5. VOLTAGE METER ModeInverted Display ON or Option OFFFull Power-up text sequence.Text Messages identify band AutoScan 11. AutoScan , “Highway”,received. Between alerts, display “City X”or “City ALL.”General Features selected by pressingshows readout of your vehicle’s CTY button followed by the PWRbattery voltage. Button when the unit is off.2Operating Modes areselected using the PWR button(see page 5.)General Selectable Features areaccessed by pressing the PWR andCTY buttons simultaneously, whenthe unit is off. (see page 11.)Note: for convenience AutoScan is accessed using the CTY button(see page 9.)