For KEIL MDK ARM with ULINK2

More documents

Recommendations

Info

User Manual: BlueBoard-LPC13431.0 INTRODUCTIONThis document is the User Manual for the BLUEBOARD-LPC1343, a low cost ARM Cortex-M3 basedboard by NGX Technologies. This document reflects its contents which include system setup,debugging, and software components. This document provides detailed information on the overalldesign and usage of the board from a systems perspective.Before proceeding further please refer the quick start guide for BLUEBOARD-LPC1343 features andBLUEBOARD-LPC1343 verification.For BLUEBOARD-LPC1343 Quick Start Guide: Click here.For the most updated information on the BLUEBOARD-LPC1343 board please refer to NGX’website.4 www.ngxtechnologies.com
User Manual: BlueBoard-LPC13432.0 BLUEBOARD-LPC1343 Development Tool Setup2.1 IDE and debuggerAs mentioned in the earlier section, NGX’s MCU evaluation platforms are not coupled tightly with anyone particular combination of IDE and debugger. The following sections will explain the setup for KEILand ULINK2 as the IDE and debugger respectively.2.2 Installation & Configuration of KEIL softwareThe Installation of KEIL software is explained below:Note: We have used Keil uvision version 4.23 while creating the User manual for this evaluation kit.Please ensure that you are using uvision version 4.23 or above.Step 1: Open the keil setupFig. 25 www.ngxtechnologies.com
Page 1 and 2: User Manual: BlueBoard-LPC1343BlueB
Page 3: User Manual: BlueBoard-LPC1343Table
Page 7 and 8: User Manual: BlueBoard-LPC1343Step
Page 9 and 10: User Manual: BlueBoard-LPC13432.3 S
Page 21 and 22: User Manual: BlueBoard-LPC13434.1.2
Page 23 and 24: User Manual: BlueBoard-LPC13435.0 S
Page 25 and 26: User Manual: BlueBoard-LPC13437.0 C

For KEIL MDK ARM with ULINK2

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?