M A N U A L - SukellusLuola.com

3 The Razor T Weight System3.3 Rigging the TWS Waist StrapabcdefgRemove the BAT wing if fitted to the Razor Harness.Slide the Waist Strap of the TWS under the webbing of the Razor Harnessthat passes through slots A and B of the MBP and bolt it into the hole inthe middle of the MBP using one of the supplied button head screws and awasher.Slide one block weight onto either side of the Waist Strap webbing. Up toa maximum of 3kgs can be used on either side. The amount of weight usedshould be equal either side.Bolt the outside grommets into the DAPs on either side using 2 of the buttonhead screws and washers supplied. With small weight blocks use the twoinside grommets and with large block weights use the 2 outside grommets.The DAPs can be moved on the Razor Harness either closer to or further awayfrom the MBP as required to get a good fit with the Waist Strap of the TWS.Neoprene Wraps are not required for the Waist StrapDouble check all fittings on the TWS are secure and refit the BAT Wing.51