enidine

ENIDINE INCORPORATEDYour One-Source SolutionIf vibration or noise is giving you a problem, lookno further than Enidine Incorporated for thesolution.In fact we’ve got a guaranteed solution, perhapsstarting with one of the products in this catalog.If not, we have an experienced staff of engineers tohelp you solve the trickiest vibration or noise problem.PROBLEM SOLVINGIf you manufacture any product needing seriousvibration control, give us a call. If we don’t alreadyhave a solution to your problem in stock, we’llcreate one for you.No matter where or what your vibration or noiseproblems may be, Enidine engineers offer you awealth of technical knowledge, problem-solvingability and plain old common sense.SPECIAL SERVICESIn addition to the creation and turnkey installationof top-quality products and systems, we can alsoprovide related services such as feasibility studiesand special engineering designs. All are supportedby first-rate fabrication facilities.QUALITYEnidine is committed to providing our customerswith the absolute highest levels of quality.We maintain a Quality Assurance System thatconforms to the requirements of ISO 9001 andMIL-I-45208A.Enidine utilizes Statistical Process Control (SPC)to ensure that all of our processes comply withaccepted quality standards. Our Quality Controlstaff is fully trained in SPC methodology, and wetrain our vendors as well.At Enidine we don’t just talk quality—we live it.WE CAN HELPWe can help you, too. And it won’t cost you a centto find out how.Just look inside for a full introduction to ourproducts. Then phone us for a free consultation onyour vibration or noise concerns.Please call us toll-free today at 1-800-852-8508,or visit our Web site at www.enidine.com.1

Table of ContentsENIDINE INCORPORATEDTECHNICAL SECTIONPagesVibration and Shock ....................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9VIBRATION CONTROL PRODUCTSAll-Attitude Mounts ............................................................................................. 42-45Armor Plated Universal Mounts .............................................................................. 30-31Center Bushing Mounts ....................................................................................... 36-39Compression Mounts .......................................................................................... 12-15Cupmounts ...................................................................................................... 20-22Dome Mounts ................................................................................................... 16-17Fail-Safe Compression Mounts .............................................................................. 10-11Heavy Duty Plate Mounts ..................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Low Frequency Mounts ....................................................................................... 18-19Plate Mounts .................................................................................................... 46-50Ring and Bushing Mounts .................................................................................... 40-41Snubbing Washers ........................................................ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Stable-Flex Mounts ............................................................................................ 24-25Stud/Plate Mounts and Bumpers ............................................................................ 52-70Universal Mounts ............................................................................................... 26-29ET515 Series Mounts ......................................................................................... 32-35Air Mounts ....................................................................................................... 71-732

Technical Section:Vibration and ShockENIDINE INCORPORATEDShock and Vibration Glossary of TermsAmplitude—The magnitude of a force, displacement or acceleration fromsome reference point.Damping—The dissipation of energy. Two types of damping are:Coulomb or friction damping, and Hysteretic or inherent damping.Frequency—The number of oscillations that occur in a given time period.It is measured in cycles per second (CPS) or Hertz (Hz), cycles per minute(CPM) or strokes per minute (SPM).Natural Frequency—The frequency of vibration that occurs if a system ismoved from its normal position and allowed to vibrate freely.Resonance—A condition that occurs when the forcing frequency coincideswith the natural frequency of a suspension system. Avoid this at all costs.Shock—A transient event defined by a sudden change of motion, forceor velocity.Spring Rate—A measurement of stiffness. It is a constant defined bythe ratio of force to the corresponding deflection and is expressed inlbs./in.Structural Damping—Damping which reduces the vibration of resonatingsurfaces that radiate noise. Damping is accomplished by affixing a materialdirectly to the vibrating surface. This material converts the mechanicalvibration to a minimal amount of heat energy.Transmissibility—A dimensionless ratio of the dynamic output to thedynamic input.Vibration—An oscillation in a mechanical system about some referencepoint. Frequency and amplitude are used to define that oscillation.3

Technical Section:Vibration and ShockVibrationThis outline of basic vibration theory is intendedto present a simplified approach to the applicationand sizing of isolators. It will enable the designengineer to select the proper isolator to reduce theharmful effects of vibration. Obviously, real-lifesituations are more complex than this simplifiedapproach indicates.Vibration is defined as a magnitude (force,displacement, or acceleration) which oscillatesabout a reference point. Vibration is commonlyexpressed in terms of frequency, cycles persecond or Hertz (Hz).Vibration problems generally fall into two classes:1. Force excitation: The isolator is used to protectthe supporting structure from forces generated bythe supported mass (see Figure 1). An example isthe use of motor mounts in an automobile.2. Motion excitation: The isolator is used toprotect the supported mass from disturbances of thesupporting structure (see Figure 2). An example isthe use of mounts under a coordinate measuringmachine.Natural Frequency is the frequency of vibration thatwill occur if a system is disturbed from its normalposition and allowed to vibrate freely. For ourENIDINE INCORPORATEDpurposes, the natural frequency can be defined as afunction of mass and stiffness or spring rate. If thespring rate is linear, the load vs. deflection curve is astraight line (Figure 3). For instance, a load of100 lbs. will cause a deflection of .20 in.This spring will have a stiffness of:K = __ W=100 ___ = 500 lbs./in.D .20Where: K = Stiffness (lbs./in.)W = Weight of load (lbs.)D = Deflection (in.)If we assume the supported item is a rigid body,the system will have a well-defined NaturalFrequency (f n ).f i1i Kgn = 2π Wor, removing the constants:Kif n = 3.13 WWhere: W =g =Weight of load (lbs.)Acceleration due to gravity(386 in./sec. 2 )π = 3.1416If the frequency of the input that we are isolatingfrom (the forcing frequency) is defined as f f , it can beshown that if the spring has been selected so that:Supported objectis the sourceof vibrationLoad vs. DeflectionFigure 1lbs.Supported structureis the source ofvibrationin.Figure 2 Figure 34

Vibration and ShockIf d = .13 (typical of a highly damped silicone)1Q = _____ = 3.852(.13)The amplification factor at resonance for mostisolators varies between 2.5 and 8.0.While damping is desirable to control the responseat resonance, it actually decreases the isolation athigher frequencies. As Figure 4 indicates, the moredamping in a system, the less isolation atfrequencies above f n2.If the forcing frequency (f f ) and the desiredtransmissibility are known, the required systemnatural frequency is calculated by:f ffn = ___ 1+1TFor instance, if f f is 20 Hz and T is .25, then themaximum acceptable f n is 8.9 Hz.This equation is presented in nomograph form asFigure 8.EXAMPLEA unit with a weight of 800 lbs. is to be mounted onfour isolators. The center of gravity is located at thecenter of the unit. The forcing frequency is 30 Hzand 80% isolation, or a transmissibility of .20is desired.With four isolators, the load supported by each willbe 200 lbs. If the unit’s center of gravity is eccentric,a load distribution analysis must be made todetermine the load at each mounting point.Load vs. natural frequency curves are available formost Enidine isolators. Often several isolators canbe selected using these curves. The load vs.frequency curves for the ET515 Series may resultin a proper isolator selection; however, there arealways other conditions to consider. These may beshock requirements, available space, mountingorientation or environmental conditions.First, the required system natural frequency isdetermined:f f 30f n = = = 12.2 Hz1 1 +1 +1T .20 Next, choose a load vs. natural frequency curvewhere the supported weight is in about themiddle of the load range. If after the calculationsare made desirable results are not obtained, go tothe curves of the next larger or smaller mount andENIDINE INCORPORATED6repeat the calculations.Figures 6 and 7 (see page 7) show the curves for atypical mount that has been selected for thisapplication. Draw a horizontal line across Figure 7at 200 lbs. on the load axis. Then draw a verticalline across Figure 7 from 12.2 Hz on the naturalfrequency axis. The intersection of the two lines isslightly to the left of curve -4 on Figure 7. If avertical line is drawn to the frequency axis from thepoint where the 200-lb. line intersects curve -4, thenatural frequency value is 12.5 Hz. This is slightlyhigher than the 12.2 Hz calculated. However, it isclose enough so that the -4 could be selected.If f n = 12.5 Hz is put into the transmissibilityequation:T = 1 f f 2 –1f nT = .21 or approximately 79% isolation.One should note that the magnitude of the inputwould affect the system’s natural frequency. Themodulus of elastomeric materials is strain sensitive,so at very small inputs the natural frequency will beslightly more than calculated and slightly less atvery high inputs.“Shortcuts”The preceding transmissibility equation isgraphically produced in Figure 8 (see page 7).Using the previous example, where the forcingfrequency is 30 Hz and 80% isolation is desired:Draw a horizontal line across Figure 8 located at 30Hz on the forcing frequency axis to the intersectionof the 80% isolation line. Draw a vertical line downto the natural frequency axis. This point defines therequired system’s natural frequency to beapproximately 12 Hz.From the natural frequency equation already givenon this page, it can be shown that the naturalfrequency is a function of the isolator staticdeflection(∆S). That is:if f Kn = 3.13 WWand K = ∆Sthen1f n = 3.13 ∆SThis equation is shown graphically in Figure 9.

Vibration and ShockENIDINE INCORPORATEDLoad vs. Deflection (Typical Mount)Load vs. Frequency (Typical Mount)800-0051000800700-004600400600-003lbs.500400300-002-001lbs.200907050-005-004-003-002-0012003010000 0.05 0.1 0.15 0.2 0.25Figure 6in.105 6 7 8 9 10 12.5 20HzFigure 7Vibration Mount Effectivity30002000ISOLATION %99.5999897969590807060Forcing Frequency (CPM)1000900800700600500400300RESONANCEVIBRATIONAMPLIFICATIONREGION200100100Natural Frequency (CPM)1000Figure 87

Vibration and ShockENIDINE INCORPORATEDIf load vs. frequency curves are not available, thenFigure 9 can be used to help select an isolator. Thedesired natural frequency is determined as in theexample previously discussed (12.2 Hz). Draw ahorizontal line from 12.2 Hz on the natural frequencyaxis to the intersection of the dark diagonal line.Draw a vertical line down to the intersection ofthe static deflection axis. This point, at approximately.065 in., is the static deflection required of the isolatorto produce a natural frequency of 12.2 Hz.Load deflection curves can now be used to determinewhat isolator will produce .065 inches of deflection atthe given load.ShockShock is normally classified as a transientphenomenon in contrast to vibration that is normallya steady-state phenomenon.Shock isolation is considerably different fromvibration isolation. A shock isolator is an energystorage device that stores the input energy bydeflecting and then releasing that energy over alonger period of time. The energy is released at thenatural frequency of the shock isolation system.Shock is normally defined by a pulse or a free-fallimpact. Some typical pulse shapes are half-sine,triangular, rectangular and versed-sine.A convenient way to analyze shock problems is touse the velocity change method. Figure 10 (seepage 9) gives equations to calculate the velocitychange (V) for various shock excitations.4020975310.01 0.1 1Figure 9The transmitted shock (G t ) is given by:G t = V(2πf n) =V(f n )ig 61.4The associated dynamic deflection (∆d) can bedetermined by:∆d =V2πf nEXAMPLEA piece of equipment is subjected to a 24-in. (h)free-fall drop. It is known that the equipment cannotwithstand more than 25 g’s, i.e. the fragility level is25 g’s. The equipment weighs 400 lbs.Using the transmitted shock (G t ) equation andsetting G t to 25 and solving for f n :G f = V(f n)61.4or fn = G t(61.4) =25(61.4)V VFrom Figure 10, V = 2ghwhere: h = drop height (in.)g = acceleration due to gravity (386 in./sec. 2 )or V = 2(386)(24) = 136 in./sec.The required natural frequency is:(25)(61.4)f n = 136 = 11.3 HzThe required dynamic deflection (∆d) is:V 136∆d = = = 1.92 in.2πf n 2π(11.3)Now calculate the required dynamic stiffness (K)for the system.KSince f n = 3.13 WK = (f n) 2 W =(11.3) 2 (400)(3.13) 2 (3.13) 2or K = 5213 lbs./in.We have now found that to protect the equipmentfrom the 24-in. drop we need:1. A system’s natural frequency of 11.3 Hz.2. A dynamic deflection of 1.92 in.3. A dynamic system stiffness of 5,213 lbs./in.All three of these conditions must be met toensure that no more than 25 g’s are transmitted tothe equipment.8

Vibration and ShockENIDINE INCORPORATEDNote that the dynamic stiffness (K) found is thesystem stiffness. It must be divided by the numberof mounts to determine the stiffness requiredper mount.If vibration and shock are present, both must beconsidered. Quite often the final solution isa compromise between levels of isolation for both.For more complicated, eccentrically loaded systems,Enidine will provide free analytical assistance.Typical Shock ExcitationsV = 1 t od(t)dtm o∫Force Impulset oV =∫od(t)dtAcceleration ImpulseV = V 2 – V1Velocity ShockV = 2gh (inelastic impact)V = 2 2gh (elastic impact)Free-Fall ImpactV = 2g A o t o πHalf-Sine AccelerationV = gA o t oRectangular AccelerationV = g A o t 2 oV = g A o t 2 oTriangular AccelerationFigure 109Versed-Sine Acceleration

ENIDINE INCORPORATEDFail-Safe Compression MountsThese fail-safe* isolators are ideal for the isolationof diesel engines and generators used inconstruction equipment, recreational vehicles andoff-road equipment. Their low natural frequencyallows them to be used for computer and electronicequipment when there is a need for a “ruggedized”installation. They are also excellent isolators forcompressors, motors, pumps and other machinerywhen skid mounted.INSTALLATIONThese mounts offer a wide load range of 50 to420 lbs., and have a high stiffness ratio of 6:1axial-to-radial.The standard elastomer is constructed of neoprene,which is resistant to ozone, fuel and oils. It performswell at a temperature range of -20°F (-29°C) to+180°F (82°C). Optional materials such as nitrile,butyl, silicone and others are available to meet yourenvironmental conditions or military specifications.* These mounts are fail-safe when used withsnubbing washers and installed as shown. See page 51for more information on snubbing washers.10

Compression MountsENIDINE INCORPORATEDThese rugged, high-performance mounts arenormally used for vertically applied loads to preventthe transmission of vibration and noise caused bythe rotation of unbalanced equipment such ascentrifuges, blowers, pumps, vibrators and airhandling systems.They effectively isolate disturbing frequencies aslow as 900 rpm (15 Hz), providing up to 90%isolation at 1,500 rpm (25 Hz). Their elastomerin-compression design effectively interruptsnoise transmission paths to prevent soundingboard effects.Cold-rolled steel and a neoprene elastomer resistozone and oils in an operational temperature rangeof –20°F (-29°C) to +180°F (82°C).ET5216 SeriesAxial Load vs. Deflection-300-700-600-500(lbs.)-200-100-000(lbs.)-400(in.)(in.)Part No. Color Code Load Range (lbs.) W(in.) Part No. Color Code Load Range (lbs.) W(in.)ET5216-000 Yellow 20-60 2 ET5216-400 Red 70-200 4ET5216-100 Red 40-100 2 ET5216-500 Green 140-280 4ET5216-200 Green 60-150 2 ET5216-600 Blue 240-500 4ET5216-300 Blue 80-200 2 ET5216-700 White 450-700 412

Compression MountsENIDINE INCORPORATEDHeavy DutyThis Compression Mount design is for applicationsunder heavy industrial machinery requiring efficientvibration, noise and shock isolation. The EnidineCompression Mount’s natural operating frequencyof 8-15 Hz provides efficient isolation for machinespeeds as low as 750 rpm. Tandem pairs provide evenlower natural frequencies (approximately 6-10 Hz) forspeeds down to 525 rpm.ET5213 and ET5217 SeriesAxial Load vs. Deflection(lbs.)-400-300-500-200-600-100-700(in.)0.441.641/2 -13 THD.3/4 -10 THD.4501.1251.125Part No. Color Code Max. Load (lbs.) Part No. Color Code Max. Load (lbs.)ET5217-100 Red 700 ET5213-500 White 1,500ET5217-200 Green 1,000 ET5213-600 Green 1,000ET5217-300 Blue 1,500 ET5213-700 Red 700ET5217-400 White 2,50013

ENIDINE INCORPORATEDCompression Mounts-Standard DeflectionStandard DeflectionThese mounts offer natural frequencies as low as6 Hz at maximum load. Materials are neopreneand steel. Metric available.Standard Deflection DimensionsNO RECESS IN PART NUMBERSET5256101 THRU ET5256401Part Color Max. Load Deflection L W H A B C D ENo. Code (lbs.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.)ET5250-100 Blue 35ET5250-200 Black 45ET5250-300 Red 700.20 "3 1 /8 "1 3 /4 1 "1 1 /4 5/16"-18" 2 3 /811/32 3/16ET5250-400 Green 120ET5252-100 Blue 135ET5252-200 Black 170ET5252-300 Red 240 0.25 3 7 /8 2 3 /8 1 1 /4 1 3 /4 3/8 -16 311/32 7/32ET5252-400 Green 380ET5252-500 Gray 550ET5254-100 Black 250ET5254-200 Red 525ET5254-300 Green 7500.25 5 1 /2 3 3 /8 1 3 /4 2 1 /2 1/2 -13 4 1 /8 9/16 1/4ET5254-400 Gray 1,100ET5256-101* Black 1,500ET5256-201* Red 2,250ET5256-301* Green 3,0000.25 6 1 /4* 4 5 /8* 1 5 /8 3 3 /4 1/2 -13 5 9/16 3/8ET5256-401* Gray 4,000*Rectangular Base Plate*14

ENIDINE INCORPORATEDCompression Mounts-Double DeflectionDouble DeflectionThese mounts offer natural frequencies as low as4.5 Hz at maximum load. Materials are neopreneand steel. Metric available.Double Deflection DimensionsNO RECESS IN PART NUMBERSET5257101 THRU ET5257401Part Color Max. Load Deflection L W H A B C D ENo. Code (lbs.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.)ET5251-100 Blue 35ET5251-200 Black 45ET5251-300 Red 700.40 3 1 /8 1 3 /4 1 1 /4 1 1 /z 5/16-18 2 3 /811/32 3/16ET5251-400 Green 120ET5253-100 Blue 135ET5253-200 Black 170ET5253-300 Red 240 0.50 3 7 /8 2 3 /8 1 3 /4 1 3 /4 3/8 -16 311/32 7/32ET5253-400 Green 380ET5253-500 Gray 550ET5255-100 Black 250ET5255-200 Red 525ET5255-300 Green 7500.50 5 1 /2 3 3 /8 2 7 /8 2 1 /2 1/2 -13 4 1 /8 9/16 1/4ET5255-400 Gray 1,100ET5257-101* Black 1,500ET5257-201* Red 2,250ET5257-301* Green 3,0000.50 6 1 /4* 4 5 /8* 2 3 /4 3 3 /4 1/2 -13 5 9/16 3/8ET5257-401* Gray 4,000*Rectangular Base Plate*15

ENIDINE INCORPORATEDDome MountsThe interlocking metals of the Dome Mount seriesresult in a fail-safe mount. This capability and lowstiffness make them ideal for isolatingmedium-to-large-sized engines as well as fans,blowers, pumps and air handling equipment.They have an approximate natural frequency of 9Hz at maximum load. The elastomer is neopreneand the metals are zinc-plated steel.øB (2X) ø0.53CW1.660.12LET5254500 RETAINER FOR STANDARD NUT OR BOLTET5254600 RETAINER FOR SAE HEAVY DUTY NUTPart Color Max. Load Spring Rate L W C BNo. Code (lbs.) (lbs./in.) (in.) (in.) (in.) (in.)ET5254-501 Red 375 3,000 "5 3 /8 "3 1 /4 "4.12 1/2"ET5254-502 Green 800 6,400 5 3 /8 3 1 /4 4.12 1/2ET5254-503 Blue 925 7,400 5 3 /8 3 1 /4 4.12 1/2ET5254-504 White 1,425 11,500 5 3 /8 3 1 /4 4.12 1/2ET5254-601 Red 525 4,150 6 1 /4 3 15 /16 5.00 3/4ET5254-602 Green 1,000 8,300 6 1 /4 3 15 /16 5.00 3/4ET5254-603 Blue 1,250 10,000 6 1 /4 3 15 /16 5.00 3/4ET5254-604 White 1,950 15,600 6 1 /4 3 15 /16 5.00 3/416

Dome MountsENIDINE INCORPORATEDET5254-5xx SeriesCompression Load vs. Deflection16001400-504LOAD (lbs.)12001000800600400200-503-502-50100 0.02 0.04 0.06 0.08 0.1 0.12 0.14DEFLECTION (in.)ET5254-6xx SeriesCompression Load vs. Deflection20001800-6041600LOAD (lbs.)140012001000800600400-603-602-60120000 0.02 0.04 0.06 0.08 0.1 0.12 0.14DEFLECTION (in.)17

Low Frequency MountsENIDINE INCORPORATEDEnidine Low Frequency Mount’s unique designbonds a steel spring inside a matrix ofoil/ozone-resistant neoprene. The springs absorblow frequency vibrations, slowing and passing themon to the resilient neoprene. This material—madeeven more stable by the springs—interrupts thesound path, prevents noise amplification caused bysounding board effects and stops vibrations frombeing transmitted to the floor or work surface.Low Frequency Mounts are made for your toughestvibration applications. They tame the effects of paintmixers, air conditioning units, air compressors andmore, indoors and out. There are models for loadsfrom 50 to 4,700 lbs. which exhibit 3.5 Hz naturalfrequency at maximum load.Typical Mounting ApplicationATTACHMENTHARDWAREEQUIPMENT FRAMELOW FREQUENCYMOUNTFLOOR18

Low Frequency MountsDimensions and SpecificationsENIDINE INCORPORATED5" TYP. 6" SQUARE4"3/4–10 THD3/4 DEEPINTERNALMETALSPRINGø5 1/2"ø4 1/2"(4) ø13/323 3/4"2 3/4"1/2 – 13INTERNALMETALSPRING3 3/4"4 3/8"ø3"ø2 5/16"(2) ø0.4062 3/4"3/32"Part Color Min. Approx. Max. Approx.No. Code Load (lbs.) Defl. (in.) Load (lbs.) Defl. (in.)ET6106-000 Yellow 150 0.1 1,800 1.0ET6106-200 Green 500 0.15 3,100 0.9ET6106-400 White 1,200 0.2 4,700 0.8Part Color Min. Approx. Max. Approx.No. Code Load (lbs.) Defl. (in.) Load (lbs.) Defl. (in.)ET6150-300 Yellow 50 0.1 400 0.9ET6150-500 Green 100 0.1 1,100 0.9ET6150-700 White 250 0.1 4,600 0.9ET6106 SeriesET6150 SeriesAxial Load vs. Deflection40003500-400-200Axial Load vs. Deflection16001400-70030001200-500LOAD (lbs.)2500200015001000-000LOAD (lbs.)1000800600400-30050020000 0.2 0.4 0.6 0.8 1DEFLECTION (in.)00 0.2 0.4 0.6 0.8 1DEFLECTION (in.)19

CupmountsENIDINE INCORPORATEDThree Way ProtectionHelp your sensitive equipment defend itself againsthigh-impact shocks by installing Enidine Cupmounts.These rugged and versatile mounts also controlvibration and interrupt structureborne noise. Undernormal loading conditions, they exhibit naturalfrequencies of approximately 25 Hz and isolatedisturbing frequencies above 35 Hz.Fail-safe ConstructionAvailable in two basic sizes, these compact,low-profile isolators have interlocking componentsof steel (other metals available) and standardneoprene or high damped silicone elastomers.They can be used to mount your equipment incompression, tension and shear applications. Nomatter how the mount is oriented or the load isdirected, the elastomer is in compression.Land, Sea and Air UsesGreat resistance to severe shock makes cupmountsideal for protecting sensitive equipment onrough-terrain vehicles or railroad cars. Factories ofall types use them for everything from numericallycontrolled machinery or electronic control panels toblowers. And they stand guard against shock onshipboard equipment, shipping containers, and bothaircraft and missile electronics. Oil resistantstandard cupmounts operate over a temperaturerange of -20°F (-29°C) to +180°F (82°C). For moresevere environments, choose optional siliconeelastomers to provide increased corrosionresistance and operation over an even widertemperature range.20

CupmountsENIDINE INCORPORATEDAll models are available with through center holesor metric thread sizes, in addition to the tappedhole dimension shown. Standard models havemetal parts of cold rolled steel (zinc plated) and aneoprene elastomer; other metals may be requested,and high damped silicone is an optional elastomerfor special applications.Size 1* Size 2Standard Optional Maximum VehicularNeoprene High Damped Stationary LoadElastomer Silicone Elast. Load RangePart No. Part No. (lbs.) (lbs.)ET5206-100 ET5206-600 020 8-14ET5206-200 ET5206-700 040 14-26ET5206-300 ET5206-800 070 26-38ET5206-400 ET5206-900 100 38-62*Size 1 cupmounts also available with 5/16-18 tapped hole.ET5206 SeriesLOAD (lbs.)Axial Load vs. Deflection18016014012010080604020-900-400-800-300-600-100-700-200Standard Optional Maximum VehicularNeoprene High Damped Stationary LoadElastomer Silicone Elast. Load RangePart No. Part No. (lbs.) (lbs.)ET5208-100 ET5209-500 050 15-30ET5208-200 ET5209-600 0100 30-50ET5208-300 ET5209-700 0150 50-80ET5208-400 ET5209-800 250 80-110ET5208-500 ET5209-900 400 110-160ET5209 Series (TOP)ET5208 Series (BOTTOM)LOAD (lbs.)Axial Load vs. Deflection700600500400300200100-900-500-700-300-600-200-500-100-800-40000 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08DEFLECTION (in.)00 0.01 0.02 0.03 0.04 0.05 0.06 0.07DEFLECTION (in.)21

CupmountsMounting PositionsENIDINE INCORPORATEDEnidineCupmountsPreferred for:• Protection against vibration, shock and noise• Multi-directional loading• Fail-safe construction• Rugged, compact design• Load range to 1,800 lbs.• Choice of elastomersSince the elastomer is always in compression,Enidine Cupmounts operate with equal efficiency inupright, inverted or bulkhead mounting positions,regardless of how the mount is oriented or the loaddirected.Typical Transmissibility9Neoprene ElastomerTRANSMISSIBILITY (OUTPUT/INPUT)6310.70.4Elastomer Data0.10 10 20 30 40 50 60 70 80FREQUENCY RATIO (Hz)Environment Neoprene SiliconeTemperature -20°F(-29°C) to +180°F (82°C) -80°F (-62°C) to +300°F (149°C)Ozone Resistance Good ExcellentOil Resistance Excellent GoodHeat Aging Good Excellent22

ENIDINE INCORPORATEDHeavy Duty Plate MountsEnidine Heavy Duty Plate Mounts provide excellentvibration isolation for applications where lownatural frequency is required. At the rated loads,these mounts provide a natural frequency below7 Hz. When used with snubbing washers, thesemounts are fail-safe and can be used in veryabusive applications.ET6159-1xx SeriesTypical applications include gas and diesel engines,generator sets, pumps, compressors, and manyother types of mobile equipment.Materials include oil and ozone resistant neoprene,and low carbon steel. Other elastomers are available,including silicone, natural rubber, and butyl.ET6159-2xx SeriesPart Max. Axial Color Part Max. Axial ColorNumber Load (lbs.) Code Number Load (lbs.) CodeET6159-101 85 Yellow ET6159-201 150 RedET6159-102 120 Red ET6159-202 185 GreenET6159-103 155 Green ET6159-203 320 BlueET6159-104 275 Blue ET6159-204 425 WhiteDeflection at Maximum Load = 0.25 in.Radial Stiffness = 2.5 x Axial Stiffness23

Stable-Flex MountsENIDINE INCORPORATEDEnidine Stable-Flex Mounts are specificallyengineered to isolate lightweight, low-speedequipment. The complex geometry of the elastomerelement in the mount provides a low-axial stiffnessand excellent lateral stability.These fail-safe isolators yield an axial naturalfrequency of approximately 8 Hz at the rated loadsfor effective isolation of low speeds. They areconstructed of zinc-plated low-carbon steel, bondedto neoprene for superior ozone and oil resistance.Other specialty elastomers are available, includinghigh-damped silicone.SPECIAL FEATURES• Low Axial Natural Frequency• Increased Lateral Stability• Rugged Construction• Ease of Installation• Fail-Safe DesignCOMMON APPLICATIONS• Small Engines• Generators• Compressors• Pumps• Other Industrial Equipment• Various Mobile Applications24

Stable-Flex MountsENIDINE INCORPORATEDAxial Load vs. Deflection Curve4.32M10 x 1.5200-5102.500.35150-508ø0.35 1.73 1.500.47LOAD (lbs.)100-5061.402.50Note: All dimensions in inches.-50450-50200 0.02 0.04 0.06 0.08 0.1 0.12 0.14DEFLECTION (in.)Part No. Rated Axial Load (lbs.) Color CodeET5204-5020 30 YellowET5204-5040 55 RedET5204-5060 75 GreenET5204-5080 120 BlueET5204-510 180 WhiteNote: For 3 ⁄8-16 Thread add “-A” to part number.25

Universal MountsENIDINE INCORPORATEDStop Vibration, Noise, ShockLow-cost, easy-to-install Universal Mounts providefail-safe, all-attitude isolation for vehicle cabs,engines, transmissions and other equipment up to4,550 lbs. in mobile applications.Consisting of two parts—an elastomeric ring and anelastomeric bushing bonded to a center metalDimensionsSNUBBING WASHER(OPTIONAL)spacer—universal mounts are held in place with athrough bolt.With an operating temperature range of -20°F(-29°C) to +180°F (82°C), the standard neopreneelastomer resists ozone, oils and fuels whileproviding adequate rebound protection. Otherelastomers are also available.øDISOLATED EQUIPMENTR-RADIUSREQUIREDøAøC MOUNTING HOLEøB ELASTOMERISOLATEDFRAMEGEF-INSTALLEDR-RADIUSREQUIREDøASUPPORTSTRUCTUREGEøC MOUNTING HOLEøB ELASTOMERF-INSTALLEDøDSNUBBING WASHER(OPTIONAL)GA B C D E F Thin Thick RPart No. (in.) (in.) (in.) (in.) (in.) (in.) Support Support (in.)ET6001-100 through -500 0.39 0.78 0.75 1.25 0.50 1.25 0.37 N/A 0.03ET6002-100 through -500 0.53 1.31 1.25 1.87 0.78 1.94 0.50 0.56 0.06ET6003-100 through -500 0.64 1.55 1.50 2.53 0.90 2.45 0.75 0.88 0.08ET6004-100 through -500 0.94 2.30 2.25 3.50 1.00 2.88 1.00 1.12 0.12ET6005-100 through -500 1.06 2.55 2.50 4.88 1.25 3.38 1.00 1.25 0.12ET6016-501 through -505 0.64 1.55 1.50 2.53 0.90 1.83 0.25 0.25 0.08ET6016-601 through -505 0.39 0.78 0.75 1.25 0.50 1.06 0.186 0.186 0.032For thick support information, contact Enidine.26

Universal MountsENIDINE INCORPORATEDET6001-100 through ET6001-500 SeriesAxial Load vs. Deflection Radial Load vs. DeflectionCurves are for Thin SupportET6002-100 through ET6002-500 SeriesAxial Load vs. Deflection Radial Load vs. Deflectionlbs.lbs.Curves are for Thin SupportCurves are for Thin Support-500-400-300-200-100(in.)-400-500-300-200-100(in.)lbs.lbs.-500-400-300-200-100(in.)ET6003-100 through ET6003-500 SeriesAxial Load vs. DeflectionRadial Load vs. Deflection-500-400-300-200-100(in.)Static Load Rating (lbs.)ThinPart Color SupportNo. Code Axial RadialET6001-100 Yellow 035 18ET6001-200 Red 080 27ET6001-300 Green 130 36ET6001-400 Blue 235 45ET6001-500 White 280 55ThickSupportPart ColorNo. Code Axial RadialET6001-100 Yellow N/A N/AET6001-200 Red N/A N/AET6001-300 Green N/A N/AET6001-400 Blue N/A N/AET6001-500 White N/A N/AStatic Load Rating (lbs.)ThinPart Color SupportNo. Code Axial RadialET6002-100 Yellow 65 45ET6002-200 Red 125 80ET6002-300 Green 170 125ET6002-400 Blue 275 190ET6002-500 White 390 290ThickSupportPart ColorNo. Code Axial RadialET6002-100 Yellow 135 55ET6002-200 Red 180 85ET6002-300 Green 240 130ET6002-400 Blue 380 190ET6002-500 White 630 290Static Load Rating (lbs.)ThinPart Color SupportNo. Code Axial RadialET6003-100 Yellow 100 80ET6003-200 Red 180 120ET6003-300 Green 250 175ET6003-400 Blue 350 265ET6003-500 White 500 370ThickSupportPart ColorNo. Code Axial RadialET6003-100 Yellow 215 90ET6003-200 Red 360 140ET6003-300 Green 490 225ET6003-400 Blue 860 385ET6003-500 White 1,330 69027

Universal MountsENIDINE INCORPORATEDET6004-100 through ET6004-500 SeriesAxial Load vs. DeflectionRadial Load vs. Deflection(lbs.)Curves are for Thin Support(lbs.)Curves are for Thin Support-500-400-300-200-100(in.)-500-400-300-200-100(in.)(lbs.)(lbs.)-500-400-300-200-100(in.)ET6005-100 through ET6005-500 SeriesAxial Load vs. DeflectionRadial Load vs. Deflection-500-400-300-200-100(in.)Static Load Rating (lbs.)ThinPart Color SupportNo. Code Axial RadialET6004-100 Yellow 160 100ET6004-200 Red 300 200ET6004-300 Green 410 310ET6004-400 Blue 520 420ET6004-500 White 610 570ThickSupportPart ColorNo. Code Axial RadialET6004-100 Yellow 270 130ET6004-200 Red 500 210ET6004-300 Green 760 330ET6004-400 Blue 1,150 550ET6004-500 White 2,070 955Static Load Rating (lbs.)ThinPart Color SupportNo. Code Axial RadialET6005-100 Yellow 300 150ET6005-200 Red 500 220ET6005-300 Green 700 300ET6005-400 Blue 900 470ET6005-500 White 1,200 660ThickSupportPart ColorNo. Code Axial RadialET6005-100 Yellow 1,150 250ET6005-200 Red 1,925 350ET6005-300 Green 2,575 600ET6005-400 Blue 3,550 900ET6005-500 White 4,550 1,400Mounting Configurations28

Universal MountsENIDINE INCORPORATEDET6016-501 through -505 SeriesAxial Load vs. DeflectionRadial Load vs. Deflection-505-504-503-505-504(lbs.)-502(lbs.)-503-501-502-501(in.)(in.)Static Load Rating (lbs.)ColorPart No. Code Axial RadialET6016-501 Yellow 215 40ET6016-502 Red 360 60ET6016-503 Green 490 88ET6016-504 Blue 860 133ET6016-505 White 1,330 185ET6016-601 through -605 SeriesAxial Load vs. DeflectionRadial Load vs. Deflection-605-605-604(lbs.)-604(lbs.)-603-603-602-602-601-601(in.)(in.)Static Load Rating (lbs.)ColorPart No. Code Axial RadialET6016-601 Yellow 35 9ET6016-602 Red 80 14ET6016-603 Green 130 18ET6016-604 Blue 235 23ET6016-605 White 280 2829

ENIDINE INCORPORATEDArmor Plated Universal MountsThe Armor Plated Universal Mount can be usedin the same applications as the standard UniversalMount. But, since it has bonded-in steel wearsufaces, it can be used in more extremeenviroments. The steel wear surfaces eliminate theneed for machining a radius in the support structure.Max. Shear Max. Comp.Part No. Color Load (lbs.) Load (lbs.)ET6027-001 Yellow 16 100ET6027-002 Red 20 150ET6027-003 Green 25 200ET6027-004 Blue 32 250ET6027-005 White 40 300Note:All dimensions in inches.30

ENIDINE INCORPORATEDArmor Plated Universal MountsET6027-001 through -005 SeriesAxial Load vs. Deflection-005-004(lbs.)-003-002-001(in.)Radial Load vs. Deflection-005-004(lbs.)-003-002-001(in.)31

ET515 Series MountsENIDINE INCORPORATEDCompact ET515 Series all-attitude mounts are amoney-saving way to protect equipment fromvibration and shock.High load capacity, stability, and the ability to beinstalled at any mounting angle make them idealfor a wide variety of applications, including vehiclecabs; truck, bus and marine engines; generators;air conditioning units; motors and electronicequipment.Available in seven basic sizes from 2 to 4 1 /2 in.diameter, ET515 Series mounts handle axial loadsof 100 to 2,700 lbs. You can install them at anyconvenient mounting angle thanks to their“shouldered” core design that makes optimum useof the neoprene elastomer shear and compressiveproperties. They offer a fail-safe installation whenthe proper snubbing washers are used.Oil, fuel and solvent-resistant neoprene—with atemperature range of -20°F (-29°C) to +180°F (82°C)—provides isolation in all planes, regardless of thedirection of the exciting forces.At maximum load, the natural frequency of thesemounts is about 8.5 Hz, providing effective isolationfrom disturbing frequencies of 12 Hz and above.Color Max. Axial Max. RadialPart Number Code Load (lbs.) Load (lbs.)ET5150-501 Yellow 0038 0N/AET5150-502 Red 0060 0N/AET5150-503 Green 0090 0N/AET5150-601 Yellow 0075 0N/AET5150-602 Red 0105 0N/AET5150-603 Green 0150 0N/AET5150-701 Red 0150 0100ET5150-702 Green 0200 0150ET5150-703 Blue 0270 0180ET5150-704 White 0330 0220ET5150-801 Yellow 0270 0180ET5150-802 Red 0330 0220ET5150-803 Green 0390 0260ET5150-804 Blue 0480 0320ET5150-805 White 0570 0380ET5151-001 Yellow 0480 0320ET5151-002 Red 0570 0380ET5151-003 Green 0690 0460ET5151-004 Blue 0840 0560ET5151-005 White 1,020 0680ET5151-201 Yellow 0690 0460ET5151-202 Red 0840 0560ET5151-203 Green 1,020 0680ET5151-204 Blue 1,245 0830ET5151-205 White 1,500 1,000ET5151-601 Red 1,350 0800ET5151-602 Green 1,600 1,000ET5151-603 Blue 1,900 1,400ET5151-604 White 2,600 1,80032

ET515 Series MountsENIDINE INCORPORATEDET5150-501 through -503 SeriesLOAD (lbs.)Axial Load vs. Deflection140-503120100-5028060-501402000 0.05 0.1 0.15 0.2 0.25DEFLECTION (in.)ET5150-601 through -603 SeriesLOAD (lbs.)Axial Load vs. Deflection25020015010050-602-6010 0 0.05 0.1 0.15 0.2 0.25-603DEFLECTION (in.)ET5150-701 through -704 SeriesAxial Load vs. Deflection-704-703-702(lbs.)-701(in.)33

ET515 Series MountsENIDINE INCORPORATEDET5150-801 through -805 Series53Axial Load vs. Deflection-805-804(lbs.)-803-802-801(in.)ET5151-001 through -005 SeriesAxial Load vs. Deflection-005-004(lbs.)-003-002-001(in.)ET5151-201 through -205 SeriesAxial Load vs. Deflection-205-204-203(lbs.)-202-201(in.)34

ET515 Series MountsENIDINE INCORPORATEDET5151-601 through -604 SeriesAxial Load vs. Deflection-604-603(lbs.)-602-601(in.)Typical Installation35

ENIDINE INCORPORATEDCenter Bushing MountsHere’s the answer to fail-safe, multi-directionalisolation in heavy-duty applications.During installation, a self-contained rebound isformed when a Center Bushing Mount’s resilientelement spreads under compression. And theinternal steel bushing serves as a positive spacer.These low-deflection, one-piece safety mounts arerated by static load in the axial direction. They canhandle dynamic loads up to three times their staticload rating.Versatile Center Bushing Mounts will also takedynamic radial loads, but we recommend againstusing them for static radial loads.Neoprene elastomer operates over a temperaturerange of -20°F (-29°C) to +180°F (82°C).A B C D G H IPart No. (in.) (in.) (in.) (in.) E(min.) F(min.) (in.) (in.) (in.) R(min.)ET6022-000 through -300 0.31 0.23 0.69 0.40 1.25 1.10 0.81 0.75 1.09 0.06ET6023-000 through -300 0.38 0.41 1.00 0.47 2.00 1.50 1.24 1.12 1.75 0.06ET6023-500 through -800 0.62 0.53 1.38 0.53 2.25 1.70 1.35 1.25 2.00 0.06ET6024-000 through -300 0.62 0.53 1.38 0.64 2.25 1.70 1.35 1.25 2.00 0.06ET6024-500 through -800 0.75 0.62 1.75 0.64 2.85 2.20 1.61 1.50 2.50 0.06ET6025-000 through -300 0.93 0.80 2.00 0.64 3.50 2.50 1.96 1.81 2.97 0.12ET6026-000 through -300 0.75 1.13 2.12 0.77 4.25 2.70 2.20 2.00 3.68 0.1236

ENIDINE INCORPORATEDCenter Bushing MountsPart No. Color Code Max. Load (lbs.)ET6022-000 Red 30ET6022-100 Green 50ET6022-200 Blue 80ET6022-300 White 140Part No. Color Code Max. Load (lbs.)ET6023-000 Red 130ET6023-100 Green 190ET6023-200 Blue 300ET6023-300 White 520ET6022 SeriesET6023 SeriesAxial Load vs. Deflection250-300200-200Axial Load vs. Deflection300-300 -200250-100LOAD (lbs.)150100-100LOAD (lbs.)200150-000-000100505000 0.01 0.02 0.03 0.04 0.05 0.06DEFLECTION (in.)00 0.02 0.04 0.06 0.08DEFLECTION (in.)34

ENIDINE INCORPORATEDCenter Bushing MountsPart No. Color Code Max. Load (lbs.)ET6023-500/ET6024-000 Red 230ET6023-600/ET6024-100 Green 360ET6023-700/ET6024-200 Blue 520ET6023-800/ET6024-300 White 720Part No. Color Code Max. Load (lbs.)ET6024-500 Red 400ET6024-600 Green 540ET6024-700 Blue 750ET6024-800 White 1,100ET6023 Series (TOP)ET6024 Series (BOTTOM)Axial Load vs. Deflection900800700600-800-300-700-200ET6024 SeriesAxial Load vs. Deflection1200-8001000-700800LOAD (lbs.)500400300200100-600-100-500-000LOAD (lbs.)600400200-600-50000 0.02 0.04 0.06 0.08DEFLECTION (in.)00 0.02 0.04 0.06 0.08DEFLECTION (in.)38

ENIDINE INCORPORATEDCenter Bushing MountsPart No. Color Code Max. Load (lbs.)ET6025-000 Red 600ET6025-100 Green 800ET6025-200 Blue 1,100ET6025-300 White 1,500Part No. Color Code Max. Load (lbs.)ET6026-000 Red 950ET6026-100 Green 1,300ET6026-200 Blue 1,850ET6026-300 White 2,400ET6025 SeriesET6026 SeriesAxial Load vs. Deflection2000-300Axial Load vs. Deflection2500-3001500-200-1002000-200-100LOAD (lbs.)1000-000LOAD (lbs.)15001000-00050050000 0.04 0.08 0.12 0.16 0.2DEFLECTION (in.)00 0.04 0.08 0.12 0.16DEFLECTION (in.)39

ENIDINE INCORPORATEDRing and Bushing MountsNeoprene Ring and Bushing Mounts areincorporated directly into the structural componentsof equipment such as office machines, motors andpumps, as well as air conditioning, electronic andscientific equipment. They offer fail-safe operationwhen installed in pairs.Opposing holes in the elastomer provide excellentlow-frequency isolation. The location of the holesisolates vibration and cushions shock parallel to themount axis. The bushing’s holes isolate vibrationperpendicular to its axis.Even if the elastomer is somehow damaged ordestroyed, the mounted member stays securely onthe supporting structure when properly installed.Neoprene offers temperature range operationof -20°F (-29°C) to +180°F (82°C).Typical Mounting Application40

ENIDINE INCORPORATEDRing and Bushing Mounts5040-000 -900-800LOAD (lbs.)3020-700-60010-50000 0.01 0.02 0.03 0.04 0.05 0.06DEFLECTION (in.)Ring Part No. Bushing Part No. Color Code Min. Load (lbs.) Max. Load (lbs.)ET5180-500 ET5182-000 Silver 1 5ET5180-600 ET5182-100 Yellow 2 10ET5180-700 ET5182-200 Red 4 15ET5180-800 ET5182-300 Green 6 20ET5180-900 ET5182-400 Blue 8 25ET5181-000 ET5182-500 White 10 30LOAD (lbs.)70605040302010-000-900 -800-700-600-50000 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08DEFLECTION (in.)Ring Part No. Bushing Part No. Color Code Min. Load (lbs.) Max. Load (lbs.)ET5183-500 ET5185-000 Silver 4 20ET5183-600 ET5185-100 Yellow 8 25ET5183-700 ET5185-200 Red 10 35ET5183-800 ET5185-300 Green 14 45ET5183-900 ET5185-400 Blue 18 55ET5184-000 ET5185-500 White 22 65LOAD (lbs.)16014012010080604020-900 -700 -500-300-100-90000 0.02 0.04 0.06 0.08 0.1 0.12 0.14DEFLECTION (in.)Ring Part No. Bushing Part No. Color Code Min. Load (lbs.) Max. Load (lbs.)ET5186-900 ET5187-000 Silver 10 30ET5187-100 ET5187-200 Yellow 14 40ET5187-300 ET5187-400 Red 25 50ET5187-500 ET5187-600 Green 35 65ET5187-700 ET5187-800 Blue 45 85ET5187-900 ET5188-000 White 50 10041

All-Attitude MountsENIDINE INCORPORATEDEnidine’s ET5642-1xx Series elastomeric mountshave an aluminum center plate suited forbuilt-in electronics. The ET5642-2xx Series is aholder style, where a base mounted configurationis needed.Three models carry maximum load ratings of 4.5, 7and 10 lbs., based on 0.036" double-amplitude input.An elastomer-in-compression design assureseffective isolation in all directions. Fail-safeconstruction retains the equipment undera 30G, 11 millisecond shock input at rated loads,even if the elastomer is destroyed.The highly damped silicone elastomer providesoptimum vibration isolation over a temperaturerange of –65°F (-54°C) to +300°F (149°C) and lowtransmissibility at a resonance of about 3.5maximum. Radial to axial stiffness ratio isapproximately 0.6.All models meet the environmental requirementsof MIL-E-5400, with mounting hole patternsconforming to MIL-Size 0. They are unaffected byozone, fungus or high humidity.Max.ColorStationaryPart No. Code Load (lbs.)ET5642-140 Red 04.5ET5642-150 Yellow 07.0ET5642-160 Green 10.0Holder StyleMax.ColorStationaryPart No. Code Load (lbs.)ET5642-240 Red 04.5ET5642-250 Yellow 07.0ET5642-260 Green 10.042

All-Attitude MountsENIDINE INCORPORATEDET5642-140, -150, -160 SeriesET5642-240, -250, -260 SeriesTransmissibilityLoad vs. Natural Frequency950TRANSMISSIBILITY (OUTPUT/INPUT)6310.70.40.10 10 20 30 40 50 60 70 80FREQUENCY (Hz)30-140-240-150-250-160-260101 2 3 4 5 6 7 8 9 10LOAD (lbs.)FREQUENCY RATIO (Hz)43

All-Attitude MountsENIDINE INCORPORATEDET5220 SeriesET5220 Series All-Attitude isolators protectstationary loads of 15-50 lbs. and vehicular loadsup to 30 lbs. from vibration, shock and noise.An elastomer-in-compression design provideseffective, fail-safe protection in any mountingposition, even if the elastomer should bedestroyed.The ET5220 Series plate style is for low profileuse. Neoprene elastomer is standard but highdamped silicone (HDS) is also available to meetapplication needs.HDS models—which meet MIL-E-5400 vibrationand shock requirements—have a temperaturerange of –65°F (-54°C) to +300°F (149°C) and amaximum transmissibility of about 3.5. Neoprenemodels have a temperature range of –20°F (-29°C)to +180°F (82°C) with excellent resistance to oiland ozone. Radial to axial stiffness ratio on allmodels is about 0.6.Max. Max.Color Stationary VehicularPart No. Code Load (lbs.) Load (lbs.)ET5220-500 Red 15 4-7ET5220-600 Green 25 8-11ET5220-700 Yellow 35 12-17ET5220-800 Blue 50 18-30Add HDS to part number when high damped siliconeelastomers are required.Holder StyleMax. Max.Color Stationary VehicularPart No. Code Load (lbs.) Load (lbs.)ET5220-50H Red 15 4-7ET5220-60H Green 25 8-11ET5220-70H Yellow 35 12-17ET5220-80H Blue 50 18-3044

All-Attitude MountsENIDINE INCORPORATEDET5220 SeriesHolder StyleLOAD (lbs.)Load vs. Deflection700600500400300200100-800-700-600-50000 0.05 0.1 0.15 0.2 0.25AXIAL NATURAL FREQUENCY (Hz)50403020-800-500 -600 -700102 3 4 5 6 7 8 9 10 20 30 40 50LOAD (lbs.)DEFLECTION (in.)45

Plate MountsENIDINE INCORPORATEDFail-safe operation of electronic andelectro-mechanical equipment, appliances, officemachines and transportation equipment are typicalapplications for Enidine Plate Mounts.Designed for light to medium loads, they isolatemounted equipment from external vibration and/orisolate vibration produced by the mountedequipment itself.Plate mounts feature steel and natural rubberwhich operate at temperatures of –20°F (-29°C)to +180°F (82°C). You may use them in series orparallel combinations.Part numbers shown are for steel plates.Aluminum plates and neoprene elastomer areavailable options.Axial LoadingRadial Loading46

Plate MountsENIDINE INCORPORATED(2) ø0.1411.680.84 0.53 1.41ø1.000.380.030.62ø0.166Part No. Color Code Max. Load (lbs.)ET6243-301 Yellow 1ET6243-302 Red 2ET6243-303 Green 3ET6243-304 Blue 4ET6243-306 White 6Deflection at Max. Load = .181.75 TYP.1.38 TYP.1.95ø1.50(2) ø0.1660.382.321.950.970.550.050.88ø0.257Square ShapeDiamond ShapePart No. Color Code Max. Load (lbs.) Part No. Color Code Max. Load (lbs.)ET6243-406P0 Yellow 6 ET6243-4060 Yellow 6ET6243-409P0 Red 9 ET6243-4090 Red 9ET6243-413P Green 13 ET6243-413 Green 13ET6243-416P Blue 16 ET6243-416 Blue 16Deflection at Max. Load = .1847

Plate MountsENIDINE INCORPORATED2.25 SQUARE0.561.0620.342.982.4751.75 TYP.ø0.391(4X) ø0.192.000.062 ø2.25ø0.391(2X) ø0.19Square ShapeDiamond ShapePart No. Color Code Max. Load (lbs.) Part No. Color Code Max. Load (lbs.)ET6221-200 Yellow 12 ET6223-200 Yellow 12ET6222-000 Red 20 ET6223-900 Red 20ET6223-000 Green 30 ET6225-000 Green 30ET6224-500 Blue 45 ET6226-500 Blue 45ET6226-000 Blue-White 60 ET6228-000 Blue-White 60Deflection at Max. Load = .1852.251.75ø2.000.252.982.4751.0150.59 2.250.062ø0.39(4X) ø0.192.00(2X) ø0.19ø0.390Square ShapeDiamond ShapePart No. Color Code Max. Load (lbs.) Part No. Color Code Max. Load (lbs.)ET6233-000 Red 30 ET6233-200 Red 30ET6234-000 Red-Green 40 ET6234-200 Red-Green 40ET6235-000 Green 50 ET6235-200 Green 50ET6237-000 Green-Blue 70 ET6237-200 Green-Blue 70ET6239-000 Blue 90 ET6239-200 Blue 90Deflection at Max. Load = .1348

Plate MountsENIDINE INCORPORATED1.251.000.41 0.320.150.321.241.661.41ø0.166(4X) ø0.161.00(2) ø0.16ø0.166Square ShapeDiamond ShapePart No. Color Code Max. Load (lbs.) Part No. Color Code Max. Load (lbs.)ET6249-00A Yellow .5 ET6249-10A Yellow .5ET6249-001 Red 1 ET6249-101 Red 1ET6249-002 Green 2 ET6249-102 Green 2ET6249-004 Blue 4 ET6249-104 Blue 4ET6249-006 White 6 ET6249-106 White 6Deflection at Max. Load = .061.781.38(4X) ø0.160.630.200.392.341.95ø0.260.05ø1.50(2X) ø0.16ø0.26Square ShapeDiamond ShapePart No. Color Code Max. Load (lbs.) Part No. Color Code Max. Load (lbs.)ET6210-300 Yellow 3 ET6212-300 Yellow 3ET6210-600 Red 6 ET6216-600 Red 6ET6210-900 Red-Green 9 ET6212-900 Red-Green 9ET6211-200 Green 12 ET6213-200 Green 12ET6211-400 Green-Blue 14 ET6213-400 Green-Blue 14ET6211-700 Blue 17 ET6213-700 Blue 17ET6212-000 Blue-White 20 ET6214-000 Blue-White 20ET6212-600 Blue-Yellow 26 ET6214-600 Blue-Yellow 26Deflection at Max. Load = .0949

Plate MountsENIDINE INCORPORATED1.251.00ø0.170.17 ø1.000.0351.68ø0.171.4140.46 0.751.25(4X) ø0.16(2X) ø0.16Square ShapeDiamond ShapePart No. Color Code Max. Load (lbs.) Part No. Color Code Max. Load (lbs.)ET6200-400 Yellow 4 ET6202-400 Yellow 4ET6200-800 Red 8 ET6202-800 Red 8ET6201-200 Green 12 ET6203-200 Green 12ET6202-000 Blue 20 ET6204-000 Blue 20Deflection at Max. Load = .0650

Snubbing WashersENIDINE INCORPORATEDFor use with all Universal, Short Hub Universal, Armor Plated Universal,Center Bushing and ET515 Series mounts. Material: zinc-plated steel.WasherPart Number Number A B TET5150-5xx ET0018-100 1.56 .391 .090ET5150-6xx ET0018-101 2.00 .450 .125ET5150-7xx ET0018-101 2.00 .450 .125ET5150-8xx ET0030-801 2.00 .510 .130ET5151-0xx ET0030-802 2.25 .635 .150ET5151-2xx ET0030-803 2.50 .760 .190ET5164-1xx ET0018-200 2.13 .532 .134ET5170-0xx ET0018-101 2.00 .450 .125ET6001-100 to ET6001-500 ET0018-100 1.56 .391 .090ET6002-100 to ET6002-500 ET0018-200 2.13 .532 .134ET6003-100 to ET6003-500 ET0018-300 2.81 .657 .188ET6004-100 to ET6004-500 ET0018-400 3.88 .938 .250ET6005-100 to ET6005-500 ET0018-600 6.13 1.06 .250ET6016-5xx ET0018-300 2.81 .657 .188ET6016-6xx ET0018-100 1.56 .391 .090ET6022-000 to ET6022-300 ET0018-100 1.56 .391 .090ET6023-000 to ET6023-300 ET0018-200 2.13 .532 .134ET6023-500 to ET6023-800 ET0018-200 2.13 .532 .134ET6024-000 to ET6024-300 ET0018-300 2.81 .657 .188ET6024-500 to ET6024-800 ET0018-300 2.81 .657 .188ET6025-000 to ET6025-300 ET0018-300 2.81 .657 .188ET6026-000 to ET6026-300 ET0018-400 3.88 .938 .250ET6027-0xx ET0018-200 2.13 .532 .13451

Stud/Plate MountsENIDINE INCORPORATEDOn the next several pages you will find one of theindustry’s largest selections of multi-purpose mounts.Known by many names (including bumpers,snubbers, feet, sandwich mounts, attachments,shockmounts, shearmounts, cylindrical mounts,isolators, levelers and insulators), they offer solutionsto thousands of vibration and noise problems.The configurations shown are normally availablefrom stock. Other variables—such as materials,durometer, diameters, thread sizes, lengths ordepths—are also available. Standard material isnatural rubber. Neoprene is available and isidentified by an asterisk.Maximum shear load and maximum compressionload are in pounds per isolator.Stud/Stud (SS) — Both endsPlate/Stud (PS) — Each endStud (S) or Plate (P) — One end onlyPlate/Plate (PP) — Both endsMetric Stud/Plate MountsBumpersCustom Sizes AvailableMaximum RecommendedTightening TorqueThread Size(lbs.-in.)6-32 108-32 1510-32 251/4-20 535/16-18 1053/8-16 1921/2-13 60052

Stud/Plate MountsThread Size — 6ENIDINE INCORPORATEDSTYLE PPSTYLE PSSTYLE SSPart No. Style D (in.) M (in.) 6 - 32 x S (in.) P (Depth) Max. Shear (lbs.) Max. Comp. (lbs.)ET5090-300* PP 9 ⁄161 ⁄2 — 6-32 ( 1 ⁄8) 4.5 9.5ET5090-500* PP 9 ⁄161 ⁄2 — 6-32 ( 1 ⁄8) 6 18ET5090-700* PP 9 ⁄161 ⁄2 — 6-32 ( 1 ⁄8) 9 26ET5090-800* PP 3 ⁄81 ⁄2 — 6-32 ( 1 ⁄8) 3.5 4*NeoprenePart No. Style D (in.) M (in.) 6 - 32 x S (in.) P (Depth) Max. Shear (lbs.) Max. Comp. (lbs.)ET5016-800* PS 3 ⁄81 ⁄21 ⁄4 6-32 ( 5 ⁄32)‡ 3.4 4.4ET5016-900* PS3 ⁄8 5 ⁄161 ⁄4 6-32 ( 5 ⁄32) 3 4ET5017-000* PS 7 ⁄161 ⁄23 ⁄8 6-32 ( 5 ⁄32)‡ 4.4 6ET5017-100* PS 7 ⁄161 ⁄23 ⁄8 6-32 ( 5 ⁄32)‡ 3.5 4.5ET5017-200* PS3 ⁄8 5 ⁄163 ⁄16 6-32 ( 5 ⁄32) 3 4ET5017-600* PS 7 ⁄161 ⁄21 ⁄4 6-32 ( 5 ⁄32)‡ 4.4 6ET5017-700* PS3 ⁄8 5 ⁄163 ⁄8 6-32 ( 5 ⁄32) 4 5ET5018-100* PS 7 ⁄1613 ⁄321 ⁄4 6-32 ( 1 ⁄8) 2.5 3.8ET5018-400* PS 7 ⁄1613 ⁄321 ⁄4 6-32 ( 1 ⁄8) 3.4 4.4ET5019-400* PS 7 ⁄1613 ⁄321 ⁄4 6-32 ( 1 ⁄8) 6.5 14.5*Neoprene‡Blind holePart No. Style D (in.) M (in.) 6 - 32 x S (in.) P (Depth) Max. Shear (lbs.) Max. Comp. (lbs.)ET5017-800* SS 7 ⁄1613 ⁄321 ⁄4 — 3 4ET5017-900* SS 7 ⁄1613 ⁄321 ⁄4 — 3.2 5ET5019-600* SS 7 ⁄1613 ⁄321 ⁄4 - 3 ⁄8 — 3 453

Stud/Plate MountsThread Size — 8ENIDINE INCORPORATED*NeoprenePart No. D (Square) (in.) M (in.) 8-32 x S (in.) Max. Shear (lbs.) Max. Comp. (lbs.)ET5100-100 3 ⁄81 ⁄23 ⁄8 3 5ET5100-200 3 ⁄81 ⁄23 ⁄8 3.6 6.2ET5100-300 3 ⁄81 ⁄23 ⁄8 5.7 10ET5100-400 3 ⁄81 ⁄23 ⁄8 7 13.5ET5100-600 3 ⁄81 ⁄21 ⁄2 3.8 4.5ET5100-700* 3 ⁄85 ⁄163 ⁄8 4 6.2ET5100-800 3 ⁄81 ⁄21 ⁄2 4.5 6.2ET5100-900 3 ⁄85 ⁄169 ⁄16 3 4.5ET5101-000 3 ⁄85 ⁄167 ⁄32 9 13ET5101-100 3 ⁄85 ⁄167 ⁄32 3 4.5ET5101-300 3 ⁄85 ⁄167 ⁄32 4 6.2ET5101-400* 3 ⁄85 ⁄163 ⁄8 - 9 ⁄16 8 11.8ET5101-500* 3 ⁄85 ⁄167 ⁄32 3 4.5ET5101-600 3 ⁄85 ⁄161 ⁄2 3 4.5ET5101-700 3 ⁄85 ⁄163 ⁄8 3.5 5.2ET5101-800 3 ⁄85 ⁄161 ⁄2 4 6.2ET5101-900 3 ⁄85 ⁄163 ⁄8 3 4.5ET5102-500* 3 ⁄85 ⁄167 ⁄32 4 6.2ET5102-600 3 ⁄85 ⁄167 ⁄32 - 9 ⁄16 8 11.8ET5140-700 3 ⁄81 ⁄27 ⁄32 3 5Part No. D (Square) (in.) E (Dia.) (in.) M (in.) N (in.) 8-32 x S (in.) Max. Shear (lbs.) Max. Comp. (lbs.)ET5102-100 1 ⁄23 ⁄89 ⁄163 ⁄89 ⁄16 2.8 6.8ET5102-200 1 ⁄23 ⁄89 ⁄163 ⁄89 ⁄16 3.3 8.5*ET5102-300* 1 ⁄23 ⁄89 ⁄163 ⁄89 ⁄16 5.3 12.*ET5102-400* 1 ⁄23 ⁄89 ⁄163 ⁄89 ⁄16 7.5 14.5*Neoprene54

Stud/Plate MountsThread Size — 8ENIDINE INCORPORATEDSTYLE P STYLE PP STYLE PSPart No. Style D (in.) M (in.) 8 - 32 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5106-000 P9 ⁄16 1 ⁄2 — 8 - 32 — 9.5ET5106-200 P9 ⁄16 1 ⁄2 — 8 - 32 — 18ET5111-000 P 7 ⁄161 ⁄2 — 8 - 32 — 4.5ET5111-200 P 7 ⁄161 ⁄2 — 8 - 32 — 8P Thread Depth Is Min. One Thread Dia.Part No. Style D (in.) M (in.) 8 - 32 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5105-000 PP 9 ⁄16 " 1 ⁄2 — 8 - 32 4.5 9.5ET5105-200 PP 9 ⁄161 ⁄2 — 8 - 32 6 18ET5107-400 PP 5 ⁄81 ⁄2 — 8 - 32 5.5 11ET5110-000 PP 7 ⁄161 ⁄2 — 8 - 32 3.3 4.5ET5110-200 PP 7 ⁄161 ⁄2 — 8 - 32 4.8 8P Thread Depth Is Min. One Thread Dia.Part No. Style D (in.) M (in.) 8 - 32 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5104-000 PS 9 ⁄161 ⁄21 ⁄4 8 - 32 4.5 9.5ET5104-100 PS 9 ⁄161 ⁄21 ⁄4 8 - 32 5.4 14ET5104-200 PS 9 ⁄161 ⁄23 ⁄8 8 - 32 6 18ET5104-400 PS 9 ⁄161 ⁄23 ⁄8 8 - 32 4.5 9.5ET5104-600* PS 9 ⁄167 ⁄161 ⁄4 8 - 32 — —ET5105-600* PS 9 ⁄161 ⁄23 ⁄8 8 - 32 6 18ET5105-800 PS 9 ⁄161 ⁄23 ⁄8 ˆ8 - 32‡ 4.5 9.5ET5106-700* PS 9 ⁄161 ⁄23 ⁄8 8 - 32 4.5 9.5ET5107-100* PS 9 ⁄163 ⁄41 ⁄4 8 - 32 2 9ET5107-300* PS 9 ⁄163 ⁄41 ⁄8 8 - 32 2.5 12ET5109-000 PS 7 ⁄161 ⁄23 ⁄8 8 - 32 3.3 4.5ET5109-200 PS 7 ⁄161 ⁄23 ⁄8 8 - 32 4.8 8*Neoprene‡Blind HoleP Thread Depth Is Min. One Thread Dia.55

Stud/Plate MountsThread Size — 8ENIDINE INCORPORATEDSTYLE SSTYLE SSPart No. Style D (in.) M (in.) 8 - 32 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5107-000 S 9 ⁄161 ⁄23 ⁄8 — — 9.5ET5107-200 S 9 ⁄161 ⁄23 ⁄8 — — 18ET5112-000 S 7 ⁄161 ⁄23 ⁄8 — — 4.5ET5112-200 S 7 ⁄161 ⁄23 ⁄8 — — 8Part No. Style D (in.) M (in.) 8 - 32 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5091-200 SS 3 ⁄81 ⁄23 ⁄8 — 1.5 10ET5091-300 SS 3 ⁄81 ⁄23 ⁄8 — 3 17ET5091-400 SS 3 ⁄81 ⁄23 ⁄8 — 2 13ET5091-500 SS 3 ⁄81 ⁄23 ⁄8 — 1 7ET5091-600* SS 3 ⁄81 ⁄23 ⁄8 — .5 4ET5091-700* SS 3 ⁄81 ⁄23 ⁄8 — 1 7ET5091-800* SS 3 ⁄81 ⁄23 ⁄8 — 1.5 10ET5091-900* SS 3 ⁄81 ⁄23 ⁄8 — 3 17ET5092-000* SS 3 ⁄81 ⁄23 ⁄8 — 4.5 23ET5103-100 SS 9 ⁄161 ⁄23 ⁄8 — 4.5 9.5ET5103-200 SS 9 ⁄161 ⁄23 ⁄8 — 5.2 13ET5103-300* SS 9 ⁄161 ⁄23 ⁄8 — 6 18ET5103-400* SS 9 ⁄161 ⁄23 ⁄8 — 13 25ET5103-600 SS 9 ⁄161 ⁄2 — 4.5 9.5ET5105-500* SS 9 ⁄161 ⁄2 — 13 25ET5108-100 SS 7 ⁄161 ⁄23 ⁄8 — 3.3 4.5ET5108-200 SS 7 ⁄161 ⁄23 ⁄8 — 3.9 6.4ET5108-300* SS 7 ⁄161 ⁄23 ⁄8 — 4.8 8ET5108-400* SS 7 ⁄161 ⁄23 ⁄8 — 3.3 4.5ET5108-900** SS 7 ⁄163 ⁄8 — 6 13*Neoprene**Nitrile56

Stud/Plate MountsThread Size —10ENIDINE INCORPORATEDSTYLE PSSTYLE SSMax.Max.Part No. Style D (in.) M (in.) S’ S (in.) P Shear (lbs.) Comp. (lbs.)ET5104-500 PS " 9 ⁄161 ⁄2 — 8 - 32 x 3 ⁄8 10 - 32 4.5 9.5ET5104-700 PS 9 ⁄161 ⁄2 — 10 - 32 x 3 ⁄8 10 - 32 6 18ET5105-900* PS 9 ⁄161 ⁄2 — 10 - 32 x 3 ⁄8 10 - 32 5 16ET5106-400 PS 9 ⁄161 ⁄2 — 10 - 24 x 3 ⁄8 08 - 32 4.5 9.5ET5106-600 PS 9 ⁄161 ⁄2 — 10 - 32 x 3 ⁄8 08 - 32 4.5 9.5ET5106-800 PS 9 ⁄161 ⁄2 — 10 - 32 x 3 ⁄8 08 - 32 6 18ET5113-600 PS 1 3 ⁄4 — 10 - 32 x 3 ⁄8 10 - 32 24 55*NeopreneP Thread Depth Is Min. One Thread Dia.Max.Max.Part No. Style D (in.) M (in.) S’ (in.) S (in.) P Shear (lbs.) Comp. (lbs.)ET5103-700 SS 9 ⁄161 ⁄2 10 - 32 x 3 ⁄8 10 - 32 x 3 ⁄8 — 6 18ET5104-800 SS 9 ⁄161 ⁄2 10 - 32 x 3 ⁄16 10 - 32 x 3 ⁄8 — 6 18ET5105-700 SS 9 ⁄161 ⁄2 10 - 32 x 3 ⁄8 10 - 32 x 3 ⁄8 — 5 16ET5113-500 SS 1 3 ⁄4 10 - 32 x 3 ⁄8 10 - 32 x 3 ⁄8 — 15 4457

Stud/Plate MountsThread Size — 1 /4ENIDINE INCORPORATEDSTYLE P STYLE PP STYLE PSPart No. Style D (in.) M (in.)1 ⁄4 - 20 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5120-500* P 3 ⁄41 ⁄2 — 1 ⁄4 - 20 — 34ET5118-100 P 1 3 ⁄4 — 1 ⁄4 - 20 — 45ET5092-400* P 1 3 ⁄4 — 1 ⁄4 - 20 — 65ET5093-800* P 1 17 ⁄32 — 1 ⁄4 - 20 — 70.*NeopreneP Thread Depth Is Min. One Thread Dia.Part No. Style D (in.) M (in.)1 ⁄4 - 20 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5117-200 PP 1 3 ⁄4 — 1 ⁄4 - 20 20 55P Thread Depth Is Min. One Thread Dia.Part No. Style D (in.) M (in.)1 ⁄4 - 20 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5112-900* PS 1 17 ⁄321 ⁄21 ⁄4 - 20 32 45ET5113-700 PS 1 1 1 ⁄21 ⁄4 - 20 10 30ET5114-500* PS 1 3 ⁄41 ⁄21 ⁄4 - 20 18 50ET5115-100* PS 1 3 ⁄43 ⁄81 ⁄4 - 20 24 55ET5115-600* PS 1 3 ⁄43 ⁄81 ⁄4 - 20 28 65ET5116-100 PS 1 3 ⁄41 ⁄21 ⁄4 - 20 18 45ET5116-200 PS 1 3 ⁄41 ⁄21 ⁄4 - 20 20 50ET5116-300 PS 1 3 ⁄41 ⁄21 ⁄4 - 20 21 55ET5116-600* PS 1 3 ⁄41 ⁄21 ⁄4 - 20 35 75ET5118-800* PS 1 3 ⁄41 ⁄21 ⁄4 - 20 30 65ET5158-200* PS 1 3 ⁄43 ⁄41 ⁄4 - 20 18 45ET5119-800* PS 1 1 1 ⁄21 ⁄4 - 20 20 50ET5120-100* PS 3 ⁄41 ⁄21 ⁄21 ⁄4 - 20 8 21ET5120-200* PS 3 ⁄41 ⁄21 ⁄21 ⁄4 - 20 12 28ET5120-300* PS 3 ⁄41 ⁄21 ⁄21 ⁄4 - 20 16 34ET5120-400* PS 3 ⁄41 ⁄21 ⁄21 ⁄4 - 20 20 40*NeopreneP Thread Depth Is Min. One Thread Dia.58

Stud/Plate MountsThread Size — 1 /4ENIDINE INCORPORATEDSTYLE SSTYLE SSPart No. Style D (in.) M (in.) 1 ⁄4 - 20 x S (in.) Max. Shear (lbs.) Max. Comp. (lbs.)ET5088-900* S 1 13 ⁄4 — 70ET5113-800 S 117 ⁄323 ⁄8 — 40ET5113-900 S 117 ⁄323 ⁄8 — 70ET5114-000 S 117 ⁄323 ⁄8 — 100ET5117-600* S 1 1 ⁄4 11 ⁄4 — 70ET5118-500 S 13 ⁄41 ⁄2 — 44ET5118-700 S 13 ⁄41 ⁄2 — 55ET5119-100* S 13 ⁄47 ⁄8 — 55ET5119-500* S 1 11 ⁄2 — 50ET5119-600 S 1 13 ⁄8 — 70ET5119-700 S 1 11 ⁄4 — 70ET5158-100 S 1 41 ⁄641 ⁄2 — 35*NeoprenePart No. Style D (in.) M (in.) 1 ⁄4 - 20 x S (in.) Max. Shear (lbs.) Max. Comp. (lbs.)ET5112-300* SS 117 ⁄321 ⁄2 30 45ET5112-700 SS 17 ⁄323 ⁄8 30 45ET5112-800 SS 17 ⁄323 ⁄8 34 70ET5113-000 SS 17 ⁄321 ⁄2 - 1 ⁄4 32 45ET5113-100 SS 17 ⁄321 ⁄2 15 44ET5113-200 SS 17 ⁄321 ⁄2 30 45ET5113-300 SS 17 ⁄321 ⁄2 34 70ET5113-400 SS 17 ⁄32 1 1 ⁄4 30 55ET5114-100 SS 13 ⁄41 ⁄2 15 44ET5114-200 SS 13 ⁄41 ⁄2 18 50ET5114-300 SS 13 ⁄41 ⁄2 21 55ET5114-400* SS 13 ⁄41 ⁄2 18 50ET5114-600* SS 13 ⁄41 ⁄2 21 55ET5114-700 SS 13 ⁄45 ⁄8 18 50ET5114-800* SS 13 ⁄45 ⁄8 25 60ET5115-000* SS 13 ⁄43 ⁄4 15 44ET5115-200 SS 13 ⁄43 ⁄4 21 55ET5115-300* SS 13 ⁄43 ⁄4 21 55ET5115-400* SS 13 ⁄43 ⁄8 21 55ET5115-500* SS 13 ⁄45 ⁄8 - 1 ⁄4 25 60ET5115-700* SS 13 ⁄43 ⁄4 - 1 ⁄2 25 60ET5115-800 SS 13 ⁄43 ⁄4 18 50ET5115-900 SS 13 ⁄41 ⁄2 - 1 30 70ET5116-000* SS 13 ⁄43 ⁄4 25 60ET5116-400* SS 1 11 ⁄2 12 35ET5117-300* SS 13 ⁄41 ⁄2 15 44ET5118-400* SS 13 ⁄41 ⁄2 - 3 ⁄4 15 44ET5118-600* SS 13 ⁄43 ⁄8 25 60ET5121-500*SS3 ⁄43 ⁄89 ⁄16 - 1 20 40ET5122-300*SS3 ⁄43 ⁄83 ⁄8 - 9 ⁄16 15 32ET5122-400*SS3 ⁄43 ⁄813 ⁄32 8 22ET5122-500*SS3 ⁄43 ⁄813 ⁄32 12 28ET5122-600*SS3 ⁄43 ⁄813 ⁄32 16 34ET5122-700*SS3 ⁄43 ⁄813 ⁄32 20 40ET5122-800SS3 ⁄43 ⁄89 ⁄16 8 22ET5128-900 SS 13 ⁄41 ⁄2 - 3 ⁄8 30 70ET5129-000* SS 1 1 ⁄8 1 1 ⁄25 ⁄8 10 20*Neoprene59

Stud/Plate MountsThread Size — 5 /16ENIDINE INCORPORATEDSTYLE P STYLE PP STYLE PSPart No. Style D (in.) M (in.)5 ⁄16 - 18 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5125-400 P 13 ⁄4 —5 ⁄16 - 18 — 44ET5133-500 P 1 1 ⁄43 ⁄4 —5 ⁄16 - 18 — 120P Thread Depth Is Min. One Thread Dia.Part No. Style D (in.) M (in.)5 ⁄16 - 18 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5013-700* PP "1 3 ⁄8 1 —5 ⁄16 - 18 90 125ET5127-200* PP 1 1 —5 ⁄16 - 18 10 25ET5127-500* PP 1 1 —5 ⁄16 - 18 28 65ET5131-800 PP 1 1 ⁄4 1 1 ⁄4 —5 ⁄16 - 18 24 42ET5132-300 PP 1 1 ⁄4 1 1 ⁄4 —5 ⁄16 - 18 27 76ET5132-400 PP 1 1 ⁄4 1 1 ⁄4 —5 ⁄16 - 18 34 86*NeopreneP Thread Depth Is Min. One Thread Dia.Part No. Style D (in.) M (in.)ET5092-800* PS 1 3 ⁄8 1 1 ⁄2ET5123-400 PS 1 3 ⁄4ET5125-800 PS 1 3 ⁄4ET5127-600* PS 1 3 ⁄4ET5127-700* PS 1 3 ⁄4ET5127-800* PS 13 ⁄4ET5127-900* PS 13 ⁄4ET5128-300* PS 11 ⁄2ER5128-400* PS 1 1 ⁄2ET5128-500* PS 11 ⁄2ET5128-600* PS 11 ⁄2ET5131-300* PS 1 1 ⁄4 1ET5131-400* PS 1 1 ⁄4 1ET5132-700* PS 1 1 ⁄4 1 1 ⁄4ET5132-800* PS 1 1 ⁄4 1 1 ⁄4ET5132-900* PS 1 1 ⁄4 1 1 ⁄4ET5133-000* PS 1 1 ⁄4 1 1 ⁄4ET5135-200 PS 1 3 ⁄8 1ET5137-600 PS 1 1 ⁄2 1ET5137-700 PS 1 1 ⁄2 1ET5137-800 PS 1 1 ⁄2 1ET5137-900 PS 1 1 ⁄2 1ET5140-000* PS 1 1 ⁄2 1ET5154-200* PS 1 1 ⁄2 1*NeopreneP Thread Depth Is Min. One Thread Dia.5 ⁄16 - 18 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)5 ⁄85 ⁄16 - 18 55 1001 ⁄25 ⁄16 - 18 16 459 ⁄165 ⁄16 - 18 40 805 ⁄165 ⁄16 - 18 16 455 ⁄165 ⁄16 - 18 19 525 ⁄165 ⁄16 - 18 25 625 ⁄165 ⁄16 - 18 31 709 ⁄165 ⁄16 - 18 16 409 ⁄165 ⁄16 - 18 22 459 ⁄165 ⁄16 - 18 35 709 ⁄165 ⁄16 - 18 40 783 ⁄45 ⁄16 - 18 25 723 ⁄45 ⁄16 - 18 38 929 ⁄165 ⁄16 - 18 21 419 ⁄165 ⁄16 - 18 31 649 ⁄165 ⁄16 - 18 45 869 ⁄165 ⁄16 - 18 63 1209 ⁄165 ⁄16 - 18 66 969 ⁄165 ⁄16 - 18 30 959 ⁄165 ⁄16 - 18 40 1359 ⁄165 ⁄16 - 18 50 1859 ⁄165 ⁄16 - 18 65 2105 ⁄85 ⁄16 - 18 45 1859 ⁄165 ⁄16 - 18 40 13560

Stud/Plate MountsThread Size — 5 /16ENIDINE INCORPORATEDSTYLE SSPart No. Style D (in.) M (in.)5/16 - 18 x S (in.) Max. Shear (lbs.) Max. Comp. (lbs.)ET5013-600* SS 1 3 /8 1 1 1 /4 87 125ET5013-800* SS 1 3 /8 1 1 3 /16 - 7 /8 87 125ET5123-800 SS 1 3/41/2 -1 1 /4 15 44ET5123-900 SS 1 3/43/8 22 55ET5124-000* SS 1 3/43/8 22 58ET5124-100 SS 1 3/49/16 15 44ET5124-200 SS 1 3/49/16 18 50ET5124-300 SS 1 3/49/16 22 58ET5124-700 SS 1 3/45/8 15 44ET5125-100 SS 1 3/43/4 15 44ET5125-200 SS 1 3/43/4 18 50ET5125-300 SS 1 3/43/4 22 58ET5125-700* SS 1 3/49/16 22 58ET5126-000* SS 1 3/41/2 - 7 /8 22 50ET5126-200* SS 1 1 9/16 12 35ET5126-300 SS 1 1 9/16 16 42ET5126-500 SS 1 1 3/4 35 70ET5126-600 SS 1 1 3/4 8 25ET5126-700 SS 1 1 3/4 12 35ET5126-900** SS 1 1 5/16 - 9 /16 8 25ET5127-000 SS 1 1 1/2 - 3 /4 12 35ET5127-100** SS 1 1 5/16 - 9 /16 16 42ET5128-000* SS 1 3/41/2 - 7 /8 18 50ET5128-200* SS 1 3/41/2 - 7 /8 25 60ET5128-800 SS 1 3/49/16 - 1 1 /4 25 60ET5129-100 SS 1 1 5/16 - 9 /16 8 25ET5129-600 SS 1 1 1 /25/8 20 45ET5129-601 SS 1 1 1 /25/8 28 60ET5129-700* SS 1 1 /4 1 1 /45/8 27 76ET5129-800* SS 1 1 /4 1 1 /45/8 34 86ET5129-900* SS 1 1 /4 1 1 /45/8 60 120ET5130-100 SS 1 1 /43/49/16 36 87ET5130-200 SS 1 1 /43/49/16 43 98ET5130-300 SS 1 1 /43/49/16 52 120ET5130-400 SS 1 1 /43/49/16 45 93ET5130-500* SS 1 1 /43/41/2 - 3 /4 45 93ET5130-600 SS 1 1 /43/43/4 36 87ET5130-700 SS 1 1 /43/43/4 43 98ET5130-800 SS 1 1 /43/43/4 52 120*Neoprene** 5 ⁄16 - 24 THD61

Stud/Plate MountsThread Size — 5 /16ENIDINE INCORPORATEDSTYLE SSPart No. Style D (in.) M (in.)5/16 - 18 x S (in.) Max. Shear (lbs.) Max. Comp. (lbs.)ET5131-000 SS 1 1 /43/45/8 43 98ET5131-100 SS 1 1 /4 1 9/16 31 81ET5131-200 SS 1 1 /4 1 9/16 38 92ET5131-500 SS 1 1 /4 1 3/4 31 81ET5131-600 SS 1 1 /4 1 3/4 38 92ET5132-000 SS 1 1 /4 1 1 /49/16 21 42ET5132-100 SS 1 1 /4 1 1 /49/16 27 76ET5132-200 SS 1 1 /4 1 1 /49/16 34 86ET5132-500 SS 1 1 /4 1 1 /43/4 27 76ET5132-600 SS 1 1 /4 1 1 /43/4 34 86ET5133-700* SS 1 1 /4 1 1 /49/16 60 120ET5133-800 SS 1 1 /4 1 1 /411/16 27 76ET5133-900 SS 1 1 /4 1 1 /411/16 27 76ET5134-000 SS 1 3 /8 1 9/16 27 47ET5134-100 SS 1 3 /8 1 9/16 41 74ET5134-200 SS 1 3 /8 1 9/16 66 96ET5134-300 SS 1 3 /8 1 9/16 76 105ET5134-400* SS 1 1 /4 1 1 /47/8 27 76ET5134-500 SS 1 1 /4 1 1 /47/8 34 86ET5134-800 SS 1 3 /8 1 7/8 - 1 66 96ET5134-900 SS 1 1 /4 1 1 /411/16 60 120ET5135-000 SS 1 3 /8 1 9/16 - 3 /8 76 105ET5135-300* SS 1 3 /8 1 3/4 27 47ET5135-400* SS 1 3 /8 1 3/4 41 74ET5135-500* SS 1 3 /8 1 3/4 66 96ET5135-600* SS 1 3 /8 1 3/4 76 105ET5135-700* SS 1 3 /8 1 3/4 87 125ET5135-800 SS 1 3 /8 1 3/4 76 105ET5140-100* SS 1 1 /2 1 5/8 45 185ET5146-000* SS 2 1 3 /45/8 50 150ET5146-200* SS 2 1 3 /45/8 100 250ET5146-400* SS 2 1 3 /45/8 150 325ET5148-000* SS 1 3 /85/85/8 35 85ET5148-100* SS 1 3 /85/85/8 45 120ET5148-200* SS 1 3 /85/85/8 55 155ET5148-300* SS 1 3 /85/85/8 65 185ET5148-400* SS 1 3 /85/85/8 75 225*Neoprene62

Stud/Plate MountsThread Size — 5 /16ENIDINE INCORPORATEDSTYLE SPart No. Style D (in.) M (in.)5/16 - 18 x S (in.) Max. Comp. (lbs.)ET5124-400 S 1 3/45/8 58ET5124-500 S 1 9/165/8 58ET5125-500 S 117/329/16 50ET5125-600 S 1 3/4 1 1 /4 45ET5131-900* S 1 1 /4 1 9/16 120ET5133-100 S 1 1 /43/43/4 100ET5133-200 S 1 1 /43/43/4 120ET5133-400* S 1 1 /43/49/16 120ET5133-600* S 1 1 /43/41/2 120ET5146-600 S 2 1 3 /43/4 150ET5146-700 S 2 1 3 /43/4 200ET5146-800 S 2 1 3 /43/4 250ET5146-900 S 2 1 3 /43/4 290ET5147-000 S 2 1 3 /4*Neoprene3/4 32563

Stud/Plate MountsThread Size — 3 /8ENIDINE INCORPORATEDSTYLE PSSTYLE SSPart No. Style D (in.) M (in.) 3/8 - 16 x S (in.) P Max. Shear (lbs.) Max. Comp. (lbs.)ET5138-000 PS 1 1 /2 1 5/83/8 - 16 30 95ET5138-100 PS 1 1 /2 1 5/83/8 - 16 40 135ET5138-200 PS 1 1 /2 1 5/83/8 - 16 50 185ET5138-300 PS 1 1 /2 1 5/83/8 - 16 65 210ET5138-400 PS 1 1 /2 1 5/83/8 - 16 80 270ET5158-800* PS 1 1 /27/85/83/8 - 16 70 250*NeopreneP Thread Depth Is Min. One Thread Dia.Part No. Style D (in.) M (in.)3/8 - 16 x S (in.) Max. Shear (lbs.) Max. Comp. (lbs.)ET5139-000 SS 1 1 /2 1 5/8 30 95ET5139-100 SS 1 1 /2 1 5/8 40 135ET5139-200 SS 1 1 /2 1 5/8 50 185ET5139-300 SS 1 1 /2 1 5/8 65 210ET5139-400 SS 1 1 /2 1 5/8 80 270ET5139-500 SS 1 1 /2 1 3/4 30 95ET5139-600 SS 1 1 /2 1 3/4 40 135ET5139-700 SS 1 1 /2 1 3/4 50 185ET5139-800* SS 1 1 /2 1 3/4 65 210ET5139-900* SS 1 1 /2 1 3/4 80 270ET5162-001 SS 2 1 /2 1 7/8 85 200ET5162-002 SS 2 1 /2 1 7/8 110 250ET5162-003 SS 2 1 /2 1 7/8 150 325ET5162-004 SS 2 1 /2 1 7/8 190 425ET5162-005 SS 2 1 /2 1 7/8 220 500*Neoprene64

Stud/Plate MountsThread Size — 1 /2ENIDINE INCORPORATEDSTYLE PPSTYLE PSPart No. Style D (in.) M (in.) P (Depth) Max. Shear (lbs.) Max. Comp. (lbs.)ET5141-500* PP 2 1 11 /161/2 - 13 ( 1 /2)‡ 80 180ET5141-600* PP 2 1 11 /161/2 - 13 ( 1 /2)‡ 100 210ET5141-700* PP 2 1 11 /161/2 - 13 ( 1 /2)‡ 150 275ET5141-800* PP 2 1 11 /161/2 - 13 ( 1 /2)‡ 200 340ET5141-900* PP 2 1 11 /161/2 - 13 ( 1 /2)‡ 240 420ET5155-301 PP 3 1 /8 1 1 /21/2 - 13 ( 1 /2) 60 450ET5155-302 PP 3 1 /8 1 1 /21/2 - 13 ( 1 /2) 90 660ET5155-303 PP 3 1 /8 1 1 /21/2 - 13 ( 1 /2) 130 950ET5155-304 PP 3 1 /8 1 1 /21/2 - 13 ( 1 /2) 175 1,260ET5155-305 PP 3 1 /8 1 1 /21/2 - 13 ( 1 /2) 220 1,550ET5155-501 PP 3 1 /8 3 1/2 - 13 ( 1 /2) 38 250ET5155-502 PP 3 1 /8 3 1/2 - 13 ( 1 /2) 65 410ET5155-503 PP 3 1 /8 3 1/2 - 13 ( 1 /2) 105 690ET5155-504 PP 3 1 /8 3 1/2 - 13 ( 1 /2) 140 910ET5155-505 PP 3 1 /8 3 1/2 - 13 ( 1 /2) 185 1,190*Neoprene ‡Blind Hole P Thread Depth Is Min. One Thread Dia.Part No. Style D (in.) M (in.) 1/2 - 13 x S (in.) P (Depth) Max. Shear (lbs.) Max. Comp. (lbs.)ET5138-600* PS 1 1 /4 1 1 /411/161/2 - 13 ( 3 /8) 38 80ET5138-800* PS 1 1 /4 1 1 /411/161/2 - 13 ( 3 /8) 72 130ET5140-300* PS 1 1 /43/47/161/2 - 13 ( 3 /8) 48 90ET5140-400* PS 1 1 /43/411/161/2 - 13 ( 3 /8) 48 90ET5140-500* PS 1 1 /43/43/41/2 - 13 ( 3 /8) 48 90ET5140-600* PS 1 1 /43/43/41/2 - 13 ( 3 /8) 82 150ET5142-000* PS 2 1 11 /16 1 1 /81/2 - 13 ( 1 /2)‡ 70 160ET5142-100* PS 2 1 11 /16 1 1 /81/2 - 13 ( 1 /2)‡ 90 200ET5142-200* PS 2 1 11 /16 1 1 /81/2 - 13 ( 1 /2)‡ 140 260ET5142-300* PS 2 1 11 /16 1 1 /81/2 - 13 ( 1 /2)‡ 185 340ET5142-400* PS 2 1 11 /16 1 5 /81/2 - 13 ( 1 /2)‡ 225 410ET5155-101 PS 3 1 /8 1 1 /2 1 5 /81/2 - 13 ( 1 /2) 80 360ET5155-102 PS 3 1 /8 1 1 /2 1 5 /81/2 - 13 ( 1 /2) 110 540ET5155-103 PS 3 1 /8 1 1 /2 1 5 /81/2 - 13 ( 1 /2) 145 760ET5155-104 PS 3 1 /8 1 1 /2 1 5 /81/2 - 13 ( 1 /2) 215 980ET5155-105 PS 3 1 /8 1 1 /2 1 5 /81/2 - 13 ( 1 /2) 285 1,815ET5155-701 PS 3 1 /8 3 1 5 /81/2 - 13 ( 1 /2) 38 250ET5155-702 PS 3 1 /8 3 1 5 /81/2 - 13 ( 1 /2) 65 410ET5155-703 PS 3 1 /8 3 1 5 /81/2 - 13 ( 1 /2) 105 690ET5155-704 PS 3 1 /8 3 1 5 /81/2 - 13 ( 1 /2) 140 910ET5155-705 PS 3 1 /8 3 1 5 /81/2 - 13 ( 1 /2) 185 1,190*Neoprene ‡Blind Hole P Thread Depth Is Min. One Thread Dia.65

Stud/Plate MountsThread Size — 1 /2ENIDINE INCORPORATEDSTYLE SSTYLE SSPart No. Style D (in.) M (in.)ET5012-100* S 1 1 /43/4ET5012-200* S 1 1 /43/41/2- 13 x S (in.) Max. Comp. (lbs.)3/4 903/4 150*NeoprenePart No. Style D (in.) M (in.)1/2 - 13 x S (in.) Max. Shear (lbs.) Max. Comp. (lbs.)ET5138-500 SS 1 1 /4 1 1 /411/16 29 76ET5138-700* SS 1 1 /4 1 1 /411/16 63 120ET5141-000* SS 2 1 11 /16 1 1 /8 60 160ET5141-100* SS 2 1 11 /16 1 1 /8 80 200ET5141-200* SS 2 1 11 /16 1 1 /8 125 260ET5141-300* SS 2 1 11 /16 1 1 /8 175 335ET5141-400* SS 2 1 11 /16 1 1 /8 210 400ET5155-201 SS 3 1 /8 1 1 /2 1 5 /8 90 360ET5155-202 SS 3 1 /8 1 1 /2 1 5 /8 120 540ET5155-203 SS 3 1 /8 1 1 /2 1 5 /8 155 760ET5155-204 SS 3 1 /8 1 1 /2 1 5 /8 225 980ET5155-205 SS 3 1 /8 1 1 /2 1 5 /8 295 1,815ET5155-601 SS 3 1 /8 3 1 5 /8 38 250ET5155-602 SS 3 1 /8 3 1 5 /8 65 410ET5155-603 SS 3 1 /8 3 1 5 /8 105 690ET5155-604 SS 3 1 /8 3 1 5 /8 140 910ET5155-605 SS 3 1 /8 3 1 5 /8 185 1,190*Neoprene66

Stud/Plate MountsThread Size — MetricENIDINE INCORPORATEDSTYLE PSTYLE PSD M S Maximum MaximumPart No. Style (mm) (mm) (mm) P Shear (Kg) Comp. (Kg)ET5095-500* P 19 13 — M6 x 1.0 — 35ET5107-500 P 19 13 — M5 x 0.8 — 35*NeopreneP Thread Depth Is Min. One Thread Dia.Part No. StyleD(mm)M(mm)S(mm) PMaximumShear (Kg)MaximumComp. (Kg)ET5019-700* PS 9,5 8. M3 x 0.5 x 40.0 6 - 32 3 4,5ET5019-800* PS 9,5 9,5 M3 x 0.5 x 40.0 6 - 32 3 4,5ET5092-600* PS 25 25 M6 x 1.0 x11.5 M6 x 1.00 12 35ET5094-200* PS 25 25 M6 x 1.0 x19.0 M6 x 1.00 12 35ET5094-701* PS 32 32 M8 x 1.25 x14.0 M8 x 1.25 35 70ET5094-702* PS 32 32 M8 x 1.25 x14.0 M8 x 1.25 50 92ET5094-703* PS 32 32 M8 x 1.25 x14.0 M8 x 1.25 65 125ET5095-200* PS 25 25 M6 x 1.0 x11.5 M6 x 1.00 35 70ET5109-500 PS 11 13 M4 x 0.7 x 60.0 M4 x 0.70 5 8ET5109-501 PS 11 13 M4 x 0.7 x 40.0 M4 x 0.70 5 8ET5125-900 PS 25 19 M8 x 1.25 x14.0 M8 x 1.25 40 80ET5144-700* PS 25 19 M6 x 1.0 x13.0 M6 x 1.00 22 58ET5145-200* PS 35 25 M6 x 1.0 x19.0 M6 x 1.00 66 96ET5145-300* PS 19 16 M4 x 0.7 x10.0 M4 x 0.70 25 50ET5155-001* PS 79 38 M12 x 1.75 x 41.0 M12 x 1.75 80 360ET5155-002* PS 79 38 M12 x 1.75 x 41.0 M12 x 1.75 110 540ET5155-003* PS 79 38 M12 x 1.75 x 41.0 M12 x 1.75 145 760ET5155-004* PS 79 38 M12 x 1.75 x 41.0 M12 x 1.75 215 980ET5155-005* PS 79 38 M12 x 1.75 x 41.0 M12 x 1.75 285 1815ET5155-401 PS 79 76 M12 x 1.75 x 41.0 M12 x 1.75 38 250ET5155-402 PS 79 76 M12 x 1.75 x 41.0 M12 x 1.75 65 410ET5155-403 PS 79 76 M12 x 1.75 x 41.0 M12 x 1.75 105 690ET5155-404 PS 79 76 M12 x 1.75 x 41.0 M12 x 1.75 140 910ET5155-405 PS 79 76 M12 x 1.75 x 41.0 M12 x 1.75 185 1190*NeopreneP Thread Depth Is Min. One Thread Dia.67

Stud/Plate MountsThread Size —MetricENIDINE INCORPORATEDSTYLE SSTYLE SSD M S’ Maximum MaximumPart No. Style (mm) (mm) (mm) S Shear (Kg) Comp. (Kg)ET5094-100* S 25 21,5 M6 x 1.0 x 19 — — 55ET5144-600* S 19 09,5 M6 x 1.0 x 13 — — 34*NeopreneD M S’ S Maximum MaximumPart No. Style (mm) (mm) (mm) (mm) Shear (Kg) Comp. (Kg)ET5095-600* SS 25 13 M6 x 1.0 x 19 M6 x 1.0 x 19 22 45ET5095-700* SS 11 10 M3 x 0.5 x 60 M3 x 0.5 x 60 3 5ET5095-901* SS 25 19 M6 x 1.0 x 12 M6 x 1.0 x 12 15 44ET5095-902* SS 25 19 M6 x 1.0 x 12 M6 x 1.0 x 12 18 50ET5095-903* SS 25 19 M6 x 1.0 x 12 M6 x 1.0 x 12 21 55ET5095-904* SS 25 19 M6 x 1.0 x 12 M6 x 1.0 x 12 25 60ET5095-905* SS 25 19 M6 x 1.0 x 12 M6 x 1.0 x 12 30 70ET5109-800 SS 11 13 M4 x 0.7 x 60 M4 x 0.7 x 60 20 50ET5128-100* SS 25 19 M6 x 1.0 x 14 M6 x 1.0 x 14 20 54ET5144-500* SS 25 19 M8 x 1.25 x 14 M8 x 1.25 x 14 40 80ET5148-700 SS 19 13 M6 x 1.0 x 14 M6 x 1.0 x 14 12 28ET5154-901 SS 79 38 M12 x 1.75 x 41 M12 x 1.75 x 41 90 360ET5154-902 SS 79 38 M12 x 1.75 x 41 M12 x 1.75 x 41 120 540ET5154-903 SS 79 38 M12 x 1.75 x 41 M12 x 1.75 x 41 155 760ET5154-904 SS 79 38 M12 x 1.75 x 41 M12 x 1.75 x 41 225 980ET5154-905 SS 79 38 M12 x 1.75 x 41 M12 x 1.75 x 41 295 1815ET5156-101 SS 79 76 M12 x 1.75 x 41 M12 x 1.75 x 41 38 250ET5156-102 SS 79 76 M12 x 1.75 x 41 M12 x 1.75 x 41 65 410ET5156-103 SS 79 76 M12 x 1.75 x 41 M12 x 1.75 x 41 105 690ET5156-104 SS 79 76 M12 x 1.75 x 41 M12 x 1.75 x 41 140 910ET5156-105 SS 79 76 M12 x 1.75 x 41 M12 x 1.75 x 41 185 1190*Neoprene68

Dish End Plate/Plate MountsThread Size — 1 /2ENIDINE INCORPORATEDM Max. Shear K SMax. Comp. K cPart No. (in.) Load (lbs.) (lbs./in.) Load (lbs.) (lbs./in.)ET5149-601 1 3 /4 45 210 95 1,200ET5149-602 1 3 /4 55 280 130 1,625ET5149-603 1 3 /4 85 420 190 2,375ET5149-604 1 3 /4 130 650 290 3,625ET5149-701 2 1 /8 30 150 90 735ET5149-702 2 1 /8 45 220 115 960ET5149-703 2 1 /8 60 290 165 1,375ET5149-704 2 1 /8 100 485 265 2,200ET5149-801 2 5 /8 20 100 85 520ET5149-802 2 5 /8 27 135 110 675ET5149-803 2 5 /8 37 180 170 1,050ET5149-804 2 5 /8 65 315 260 1,62569

Stud/Plate MountsThread Size — 1 /2ENIDINE INCORPORATED1/2 -13Part No. D 1 (in.) D 2 (in.) M (in.) S (in.) Max. Shear (lbs.) Max. Comp. (lbs.)ET5014-400* 1 1 /4 140 260ET5014-500* 1 1 /4 165 340ET5014-600*12 3 /4 2 1 1 /4 190 430/32ET5015-100 1 140 260ET5015-200 1 165 340ET5015-300 1 190 430* Neoprene1/2 -20Part No. D 1 (in.) D 2 (in.) M (in.) S (in.) Max. Shear (lbs.) Max. Comp. (lbs.)ET5014-80029/32 140 26029ET5014-9002 3 /4 2 1 1 /32 165 340/3229ET5015-000 /32 190 430ET5129-300**29/32 — 340** No Stud On 2" Dia. End70

EMA Air MountsENIDINE INCORPORATEDØC4 HolesBTypicalATypicalBoltØEØDAir Valve3.9 in.3.1 in.FEATURES• Air-cushioned isolation• Low natural frequency(3 ~ 5 Hz at operating load)• High deflection• Neoprene padded top and bottom bases• Heavy wall constructionBENEFITS• High lateral stability• Low maintenance• Extends machinery life• Combined resiliency and air prevents high staticdeflection, drift or permanent set• Wide load range availableAPPLICATIONS• Air compressors• CMM machinery• Forging hammers• Industrial equipment, tools and machineryResilient elementMetal structureEnvironmental dataNeopreneStructural steel15 to 140°F (-10 to 60°C)Load Range Part Dimensions (in.) Bolt WeightPart No. (lbs.) A B C D ESize (lbs.)EMA-2 100-200 4.92 3.94 .47 1.97 3.94 M10 X 40 4.2EMA-4 200-400 4.92 3.94 .47 2.36 3.94 M12 X 50 4.4EMA-8 400-800 6.30 4.92 .47 3.54 5.43 M12 X 50 7.7EMA-15 800-1,500 7.87 6.30 .47 4.33 6.46 M12 X 50 11.7EMA-25 1,400-2,500 9.84 7.87 .55 5.91 8.35 M16 X 60 15.4EMA-45 2,400-4,500 13.78 11.81 .55 9.45 12.36 M16 X 60 34.2EMA-75 4,000-7,500 17.72 15.75 .55 12.99 16.22 M16 X 60 83.371

EMB Air MountsENIDINE INCORPORATEDFEATURES• Air-cushioned isolation with liquid-filled dampers• Low natural frequency(3 ~ 5 Hz at operating load)• High deflection• Neoprene padded bottom bases• Heavy wall constructionBENEFITS• High lateral stability• Low maintenance• Extends machinery life• Combined resiliency and air prevents highstatic deflection, drift or permanent set• Wide load range availableAPPLICATIONS• Air compressors• CMM machinery• Forging hammers• Industrial equipment, tools and machineryResilient elementMetal structureEnvironmental dataNeopreneStructural steel15 to 140°F (-10 to 60°C)Load Range Part Dimensions (in.)Part No. (lbs.) AAMB-25 1,400-2,500 11.8AMB-45 2,400-4,500 15.7AMB-75 4,000-7,500 19.7M16 x 110 BoltA(Square)ViscousDamper4.3 in.Air Valve72

AMC Air MountsENIDINE INCORPORATEDFEATURES• Air-cushioned isolation with internalviscous damping• Low natural frequency (3 ~ 5 Hz atoperating load)• High deflection• Neoprene padded top and bottom bases• Heavy wall constructionBENEFITS• High lateral stability• Low maintenance• Extends machinery life• Combined resiliency and air prevents highstatic deflection, drift or permanent set• Wide load range availableAPPLICATIONS• Air compressors• CMM machinery• Forging hammers• Industrial equipment, tools and machineryResilient elementMetal structureEnvironmental dataNeopreneStructural steel15 to 140°F (-10 to 60°C)Load Range Part Dimensions (in.)Part No. (lbs.) A BAMC-25 1,400-2,500 9.84 7.87AMC-45 2,400-4,500 13.78 11.81M16 x 110 Bolt4.0 in.Air ValveViscous DamperB (Typical)ASquare0.55 in.Holes75

Enidine Incorporated7 Centre DriveOrchard Park, New York 14127 • USAPhone: 716-662-1900Fax: 716-662-1909www.enidine.comSubsidiaries and Affiliates:Enidine West184 Technology Dr., Suite 201Irvine, California 92618 • USAPhone: 949-727-9112Fax: 949-727-9107www.enidine.comEnidine GmbHRheinauenstr, 579415 Bad BellingenRheinweiler • GermanyPhone: 49 7635 8101 0Fax: 49 7635 8101 99www.enidine.comEnidine Co. Ltd.Kuriendo Bldg. 4011839 Tsuruma Machida-ShiTokyo 194 • JapanPhone: 81 427993650Fax: 81 427 993651www.enidine.co.jpEnidine Corporativo De Mexico,S.A. de C.V.Av. Patria 3124-ACol El SauzGuadalajara, CPJalisco • Mexico 45080Phone: 52 3 646-8100Fax: 52 3 646-6755www.enidine.com.mxEnidine U.K. Ltd.Patrick Gregory RoadWolverhamptonWest Midlands, WV11 3DZUnited KingdomPhone: 44 1 902 304000Fax: 44 1 902 305676www.enidine.co.ukENIDINE PRODUCTSShock Absorbers • Rate Controls • ActuatorsAir Springs • Wire Rope IsolatorsUltraLOC Seat Recline Controls • Gas Spring ReplacementsSemi-active Isolation Systems6/01 CGTPDAMB 5M Printed in USA.