enidine

All-Attitude MountsENIDINE INCORPORATEDEnidine’s ET5642-1xx Series elastomeric mountshave an aluminum center plate suited forbuilt-in electronics. The ET5642-2xx Series is aholder style, where a base mounted configurationis needed.Three models carry maximum load ratings of 4.5, 7and 10 lbs., based on 0.036" double-amplitude input.An elastomer-in-compression design assureseffective isolation in all directions. Fail-safeconstruction retains the equipment undera 30G, 11 millisecond shock input at rated loads,even if the elastomer is destroyed.The highly damped silicone elastomer providesoptimum vibration isolation over a temperaturerange of –65°F (-54°C) to +300°F (149°C) and lowtransmissibility at a resonance of about 3.5maximum. Radial to axial stiffness ratio isapproximately 0.6.All models meet the environmental requirementsof MIL-E-5400, with mounting hole patternsconforming to MIL-Size 0. They are unaffected byozone, fungus or high humidity.Max.ColorStationaryPart No. Code Load (lbs.)ET5642-140 Red 04.5ET5642-150 Yellow 07.0ET5642-160 Green 10.0Holder StyleMax.ColorStationaryPart No. Code Load (lbs.)ET5642-240 Red 04.5ET5642-250 Yellow 07.0ET5642-260 Green 10.042