Planibond 3C - MSDS

More documents

Recommendations

Info

Material Safety Data SheetMaterial Name: PLANIBOND 3C - PART BID: SAH00467Disposal InstructionsWaste must be handled in accordance with all federal, state, provincial, and local regulations. Consult authoritiesbefore disposal.See Section 7 for Handling Procedures. See Section 8 for Personal Protective Equipment recommendations.* * * Section 14 - Transportation Information * * *DOT InformationShipping Name: Amines, liquid, corrosive, n.o.s. (Aliphatic polyamine , Isophorone diamine , m-Xylenediamine)UN/NA #: UN2735 Hazard Class: 8 Packing Group: IIIShipping Name: Amines, liquid, corrosive, n.o.s. (Aliphatic polyamine , Isophorone diamine , m-Xylenediamine)UN #: UN2735 Hazard Class: 8 Packing Group: IIIIMDG InformationShipping Name: Amines, liquid, corrosive, n.o.s. (Aliphatic polyamine , Isophorone diamine , m-Xylenediamine)UN #: UN2735 Hazard Class: 8 Packing Group: IIITDG InformationShipping Name: Amines, liquid, corrosive, n.o.s. (Aliphatic polyamine , Isophorone diamine , m-Xylenediamine)UN/NA #: UN2735 Hazard Class: 8 Packing Group: III* * * Section 15 - Regulatory Information * * *US Federal RegulationsA: General Product InformationAll components are on the U.S. EPA TSCA Inventory List. All components of this product are included, or areexempt from inclusion, in the Canadian Domestic Substance List unless otherwise noted.B: Component AnalysisNone of this products components are listed under SARA Section 302 (40 CFR 355 Appendix A), SARA Section313 (40 CFR 372.65), or CERCLA (40 CFR 302.4).State RegulationsA: General Product InformationOther state regulations may apply. Check individual state requirements.B: Component Analysis - StateThe following components appear on one or more of the following state hazardous substances lists:Component CAS CA MA MN NJ PA RIIsophorone diamine 2855-13-2 No No No Yes No Nom-Xylenediamine 1477-55-0 Yes Yes Yes Yes Yes YesCanadian WHMIS InformationA: General Product Information____________________________________________________________Page 5 of 6 Issue Date: 04 February 2013 Revision: 1.0001 Print Date: 2/5/2013
Material Safety Data SheetMaterial Name: PLANIBOND 3C - PART BID: SAH00467B: Component Analysis - WHMIS IDLThe following components are identified under the Canadian Hazardous Products Act Ingredient Disclosure List:Component CAS # Minimum ConcentrationIsophorone diamine 2855-13-2 1 %m-Xylenediamine 1477-55-0 1 %WHMIS Classification: D2B, EAdditional Regulatory InformationA: General Product InformationSupplier(s) of proprietary component(s) state that these components are contained on the TSCA inventory.B: Component Analysis - InventoryComponent CAS # TSCA CAN EEC2-Propenenitrile, reaction products with 3-amino-1,5,5- 90530-15-7 No No EINECStrimethylcyclohexanemethanamineIsophorone diamine 2855-13-2 Yes DSL EINECSm-Xylenediamine 1477-55-0 Yes DSL EINECS* * * Section 16 - Other Information * * *ReferenceT1-2522-51Other InformationReasonable care has been taken in the preparation of this information, but the manufacturer makes no warranty of merchantability or anyother warranty, expressed or implied, with respect to this information. The manufacturer makes no representations and assumes no liability forany direct, incidental or consequential damages resulting from its use. The information herein is presented in good faith and believed to beaccurate as of the effective date given. It is the buyer's responsibility to ensure that its activities comply with Federal, State or provincial, andlocal laws.MSDS History1.0000-1.0001This MSDS has been revised in the following section(s):Section 16 - Other InformationKey/LegendACGIH = American Conference of Governmental Industrial Hygienists; ADG = Australian Code for the Transport of Dangerous Goods byRoad and Rail; ADR/RID = European Agreement of Dangerous Goods by Road/Rail; AS = Standards Australia; BLV=Biological Limit Values;CAN = Canadian DSL and NDSL Inventories status; CAS = Chemical Abstracts Service; CC = Closed Cup; CFR = Code of FederalRegulations; DFG = Deutsche Forschungsgemeinschaft; DOT = Department of Transportation; DSL = Domestic Substances List; EEC =European Economic Community; EINECS = European Inventory of Existing Commercial Chemical Substances; ELINCS = European List ofNotified Chemical Substances; EPA = Environmental Protection Agency; EU = European Union; g/L = grams per Liter; HMIS = HazardousMaterials Identification System; IARC = International Agency for Research on Cancer; IMO = International Maritime Organization; IATA =International Air Transport Association; MAK = Maximum Concentration Value in the Workplace; mg/kg = milligrams per kilogram; mg/L =milligrams per Liter; mg/m3 = milligrams per Cubic Meter; NA, N/A, S.O. = Not available or Not Applicable; NDSL = Non-Domestic SubstancesList; NFPA = National Fire Protection Association; NIOSH = National Institute for Occupational Safety and Health; NJTSR = New JerseyTrade Secret Registry; NOHSC = National Occupational Health & Safety Commission; NTP = National Toxicology Program; OC = Open Cup;OSHA = Occupational Safety and Health Administration; STEL = Short-term Exposure Limit; TDG = Transportation of Dangerous Goods; TLV= Threshold Limit Value; TSCA = Toxic Substances Control Act; TWA = Time Weighted Average; TWAEV = Time Weighted AverageExposure Value; WHMIS = Workplace Hazardous Materials Information SystemContact: Product Safety RepresentativeContact Phone: 1-954-246-8888End of Sheet SAH00467____________________________________________________________Page 6 of 6 Issue Date: 04 February 2013 Revision: 1.0001 Print Date: 2/5/2013
Page 2 and 3: Material Safety Data SheetMaterial
Page 18: Material Safety Data SheetMaterial

Planibond 3C - MSDS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?