Planibond 3C - MSDS

More documents

Recommendations

Info

Material Safety Data SheetMaterial Name: PLANIBOND 3C - PART BID: SAH00467* * * Section 1 - Chemical Product and Company Identification * * *Material Name: PLANIBOND 3C - PART BProduct UseThree-component bonding agentManufacturer InformationUSA and Puerto RicoCanadaMAPEIMAPEI1144 East Newport Center Drive 2900 Francis-Hughes AvenueDeerfield Beach, FL 33442Laval, QC H7L 3J5Phone: 1-954-246-8888 Phone: 1-450-662-1212IN THE EVENT OF A CHEMICAL EMERGENCY INVOLVING A SPILL, LEAK, FIRE, EXPLOSION, EXPOSUREOR ACCIDENT, CONTACT THE FOLLOWING NUMBERS:Emergency 24 hour numbers:(USA) CHEMTREC 1-800-424-9300(Canada) CANUTEC 1-613-996-6666* * * Section 2 - Hazards Identification * * *Emergency OverviewThis product is considered hazardous under 29 CFR 1910.1200 (Hazard Communication). Causes burns to theskin and eyes. May cause sensitization by skin contact.Hazard StatementsDANGER! CORROSIVE. ALLERGEN. Causes burns to the skin and eyes. May cause sensitization by skincontact. Irritating to respiratory system. May be harmful or fatal if swallowed. Vapor harmful. Wear suitable gloves,eye/face protection, and respiratory protection. Keep out of the reach of children.Potential Health Effects: EyesThis product may be severely irritating to the eyes.Potential Health Effects: SkinThis product is severely irritating to the skin and may cause burns. Prolonged contact with this product may causeallergic skin sensitization reactions.Potential Health Effects: IngestionIngestion of this product may cause nausea, vomiting and diarrhea.Potential Health Effects: InhalationThis product is irritating to the respiratory system.Medical Conditions Aggravated by ExposureHypersensitivity to product, allergies, and skin or respiratory disordersPotential Environmental EffectsNone identified.HMIS Ratings: Health: 3 Fire: 0 Reactivity: 1 Pers. Prot.: Safety glasses, gloves, synthetic apron, vapor respiratorHazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe * = Chronic hazard* * * Section 3 - Composition / Information on Ingredients * * *CAS # Component PercentProprietary Aliphatic polyamine 10-3090530-15-7 2-Propenenitrile, reaction products with 3-amino-1,5,5-trimethylcyclohexanemethanamine 1-52855-13-2 Isophorone diamine 1-51477-55-0 m-Xylenediamine 1-5____________________________________________________________Page 1 of 6 Issue Date: 04 February 2013 Revision: 1.0001 Print Date: 2/5/2013
Material Safety Data SheetMaterial Name: PLANIBOND 3C - PART BID: SAH00467* * * Section 4 - First Aid Measures * * *First Aid: EyesImmediately flush eyes with plenty of water for at least 15 minutes. Get medical attention or advice.First Aid: SkinWash immediately with soap and water. Get medical attention or advice.First Aid: IngestionFlush out mouth with water. Get medical attention or advice. Do not induce vomiting.First Aid: InhalationImmediately remove the affected person to fresh air. Get medical attention or advice.First Aid: Notes to PhysicianProvide general supportive measures and treat symptomatically.* * * Section 5 - Fire Fighting Measures * * *General Fire HazardsSee Section 9 for Flammability Properties.This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose amoderate fire hazard.Hazardous Combustion ProductsIrritating and toxic gases or fumes may be released during a fire. Upon decomposition, this product emits carbonmonoxide, carbon dioxide and/or low molecular weight hydrocarbons.Extinguishing MediaDry chemical (preferred), foam, water.Fire Fighting Equipment/InstructionsFirefighters should wear full protective clothing including self contained breathing apparatus.NFPA Ratings: Health: 3 Fire: 0 Reactivity: 1Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe* * * Section 6 - Accidental Release Measures * * *Personal PrecautionsWear appropriate protective equipment and clothing during clean-up.Containment ProceduresDike the spilled material, where this is possible. Absorb with inert absorbent such as dry clay, sand ordiatomaceous earth, commercial sorbents, or recover using pumps. Scoop up used absorbent into drums or otherappropriate container.Environmental PrecautionsDispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations.Clean-Up ProceduresAttempt to reclaim the free product, if this is possible. Shovel the material into waste container. Thoroughly washthe area with water after a spill or leak clean-up. Keep out of the reach of children.Evacuation ProceduresNone identified.Special ProceduresRegulations vary. Consult local authorities before disposal.* * * Section 7 - Handling and Storage * * *Handling ProceduresAvoid getting this material into contact with your skin and eyes. Avoid breathing vapors or mists of this product.Wash hands after handling and before eating. Keep out of the reach of children.Storage ProceduresStore in a cool, dry, well-ventilated area. Store at ambient temperature and atmospheric pressure. Keep out ofsun.____________________________________________________________Page 2 of 6 Issue Date: 04 February 2013 Revision: 1.0001 Print Date: 2/5/2013
Page 2 and 3: Material Safety Data SheetMaterial
Page 18: Material Safety Data SheetMaterial

Planibond 3C - MSDS

Create successful ePaper yourself

Delete template?

Save as template?