AW000873 Installation Guide for Energate Thermostats

7.3 Zone Control Systems
An Energate thermostat is compatible with most zone control systems out of the box. Each zone
requires a separate thermostat as a single Energate thermostat is not capable of supporting
multiple zones by itself.
To use it with a typical zoning panel, wire up the R, C and other inputs as appropriate to the zone
control wiring panel. For each zone, there should be an appropriate array of terminals similar to
those normally on the wiring panel of the HVAC equipment.
Please treat each array of terminals, one per thermostat zone, as a separate piece of HVAC
equipment and follow the instructions from earlier in this guide for that HVAC equipment type.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE
DISCLOSED OR CONVEYED TO, USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC.
24