Grandstream Handytone 486 User Manual (PDF) - VoIPon Solutions

More documents

Recommendations

Info

HandyTone-486 User ManualGrandstream Networks, Inc.IP Address: 192 168 1 160. . .Subnet Mask: 255 255 255 0. . .Default Router: 192 .168 .1.1DNS Server 1: 192 .168 .1.1DNS Server 2: 0.0.0.0Time Zone:GMT-5:00 (US Eastern Time, New York)DaylightSavings Time: No Yes Optional Rule:4,1,7,2,0;10,-1,7,2,0;60PSTN AccessCode: (key pattern to use the PSTN line, default is "*00")NAT/Bridge/DHCP Server Information & Configuration:Device Mode:NAT RouterBridgeWAN Side HTTPAccess: No Yes (WAN side access to http server will be rejected if set to No)Reply to ICMPon WAN port: No Yes (Unit will not respond to PING from WAN side if set to No)Cloned WANMAC Addr:LAN SubnetMask:LAN DHCP BaseIP:DHCP IP LeaseTime:DMZ IP:255.255.255.0192.168.2.1120(in hex format)(default is 255.255.255.0)(base IP for the LAN port, default is 192.168.2.1)(in units of hours, default is 120 hours or 5 days)PortForwarding:WAN portWAN portWAN portWAN portWAN portWAN portWAN portWAN port00000000LAN IP LAN portLAN IP LAN portLAN IP LAN portLAN IP LAN portLAN IP LAN portLAN IP LAN portLAN IP LAN portLAN IP LAN port00000000ProtocolProtocolProtocolProtocolProtocolProtocolProtocolProtocolUDP OnlyUDP OnlyUDP OnlyUDP OnlyUDP OnlyUDP OnlyUDP OnlyUDP OnlyUpdate Cancel RebootAll Rights Reserved Grandstream Networks, Inc. 200520VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
HandyTone-486 User ManualGrandstream Networks, Inc.End UserPasswordThis field contains the password to access the Web Configuration Menu. Thepassword is case sensitive with a maximum of 25 characters.Web Port This is the device’s internal HTTP server port. Default is 80.IP AddressThere are 2 modes under which the HandyTone ATA can operate:- If DHCP mode is enabled, then all the field values for the Static IP mode arenot used (even though they are still saved in the Flash memory) and the IPphone will acquire its IP address from the first DHCP server it discovers onthe LAN it attaches to.To use PPPoE feature please set the PPPoE account settings if the HandyToneATA is connected directly to a DSL modem. The HandyTone ATA willattempt to establish a PPPoE session if any of the PPPoE fields are set.- If Static IP mode is selected, then the IP address, Subnet Mask, DefaultRouter IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fieldswill need to be configured. These fields are set to zero by default.DHCP hostnameDHCP domainDHCP vendor classIDPPPoE account IDPPPoE passwordTime ZoneThis option specifies the name of the client. This field is optional but may berequired by some Internet Service Providers. Default is blank.This option specifies the domain name that client should use when resolvinghostnames via the Domain Name System. Default is blank.This option is used by clients and servers to exchange vendor-specificinformation. Default is blank.PPPoE username. Fill this field if your ISP requires you to use a PPPoE(Point to Point Protocol over Ethernet) connection.PPPoE account password.This parameters decides how the displayed date/time will be adjustedaccording to the specified time zone.21VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
Page 1: User ManualHandyTone-486Analog Tele
Page 4 and 5: HandyTone-486 User ManualGrandstrea
Page 6: HandyTone-486 User ManualGrandstrea

Grandstream Handytone 486 User Manual (PDF) - VoIPon Solutions

Create successful ePaper yourself

Delete template?

Save as template?