Fast Fire 15 Instruction Guide - Whip Mix

ePAPER READ

DOWNLOAD ePAPER

whipmix.com

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

Molds allowed to set more than 24 hours should be re-wet bysoaking in water for 3-5 minutes.

Infinity Operations Manual (15441, 15641, 15253, 15653) - Whip Mix

Pro 200 Series QuickStart Guide - Whip Mix

Simplified Occlusal Plane Analyzer Instruction Manual - Whip Mix

Denar Mark 300 Series Brochure - Whip Mix

Infinity Operations Manual (96402,96403, 96406, 96407) - Whip Mix

unidad automatizada para retirar revestimiento - Whip Mix

denar® articulator system instruction manual - Whip Mix

4000 Series Articulator and QuickMount Face-Bow ... - Whip Mix

The Hanau™ Modular Articulator System 192 Illustrated ... - Whip Mix

Molds allowed to set more than 24 hours should be re-wet bysoaking in water for 3-5 minutes.

Place molds in pre-heated oven at metal manufacturers’recommended temperature (maximum of 1650°F). For highertemperatures, place molds in oven at 1650°F, then heat to finaltemperature at 25-40°F per minute.

Page 5 and 6: Pattern Preparation:Attach sprue to
Page 10 and 11: • Rinse the bowl out with water a
Page 12 and 13: Benchset 15 minutes, then remove mo
Page 16 and 17: Heat soak at final temperature for
Page 18 and 19: Clean castings according toalloy ma
Page 20 and 21: Physical Properties:Liquid/Powder R

Fast Fire 15 Instruction Guide - Whip Mix

Create successful ePaper yourself

Delete template?

Save as template?