CN-810 / 820 / 830 - Mrclab.com

More documents

Recommendations

Info

(Ⅰ) SPECIFICATIONModel CN-810 CN-820 CN-830Capacity 15ml x 8 pcs 15ml x 8 pcs 15ml x 12 pcsSpeed (rpm)Fixed 3,000rpm/50Hz 0 ~3,000rpm / 50Hz 0 ~3,000rpm / 50HzFixed 3,500rpm/60Hz 0 ~ 3,500rpm / 60Hz 0 ~ 3,500rpm / 60HzMax. RCF ( x g )1,050 x g (50 Hz) / 1,430 x g (60 Hz)Timer 0 ~30 or “ ON ”Triple balance systemSafety DeviceLift cover and power cut offFuse 2A (110V) / 1A (220V)PowerAC110 / 220V,50 / 60 HzDimension (mm) 290 x 320 x 245Weight8 kgsPer 15ml / 10ml tube , tube size:φ17x113mm ~φ14x95mm available.Tube HolderPer 7 ml tube, tube size:φ13 x 106mm ~φ10x75mm available.() ROTORRotorTube Size (φx L) mmMax.Min.Cat. No.6ml adapterR-8 16.5 x 117 12 x 90 2-5049-11R-12 16.5 x 100 12 x 90 2-5050-11 R-8 + 6ml adapter1
() OPERATION1. Turn the speed to be “ 0 “, then plug in the centrifuge.2. Press【manual safe lid button】, cover can be opened.3. Place even tubes into holder symmetrically toward rotor center.If tubes are in odd number, then put same volume of water in a separate tube and placesuch tubes into holder for dummy purpose.4. Close cover.5. Adjust timer to the desired time.6. Turn the speed to the required rpm, rotor begins to rotate and goes up to desired speed.7. Time is up, then press【manual safe lid button】to open the cover and power cut off atthe same time.Caution:1. Please don’t open cover during rotation.2. During rotation, please don’t exceed the max. speed of the centrifuge and don’t place substandardrotor.3. The centrifuge is without anti-explosion, don’t use explosive material.CN-820 / CN-830: Scale corresponds to speed. ( for reference only )Scale 0 1.5 2 2.5 3 3.5 4 4.5 5Speed (rpm) 0 30 290 720 1030 1380 1810 2240 2750Scale 5.5 6 6.5 7 7.5 8 8.5 9 10Speed (rpm) 3040 3200 3280 3320 3370 3410 3430 3450 35002
Page 1: OPERATION & MAINTENANCE MANUALFORCN
Page 5: () CIRCUIT DIAGRAM4

CN-810 / 820 / 830 - Mrclab.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?