30.11.2012 Views

Linux Networking Clearly Explained - lions-wing.net

Linux Networking Clearly Explained - lions-wing.net

Linux Networking Clearly Explained - lions-wing.net

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

CHAPTER 1 • CREATING A DIAL-UP INTERNET CONNECTION 15<br />

Installing a PC Card Modem<br />

2. Look at your modem. You should be able to plug<br />

the serial or parallel cable into one of the connectors<br />

on your modem.<br />

3. Now attach the other end of this cable. The right<br />

plug is typically on the back of your computer<br />

case.<br />

TIP If you have a parallel modem cable, you may already have a<br />

printer attached to the parallel port. External modems commonly<br />

include a second parallel port; detach your printer cable from your<br />

computer and then connect it to the modem.<br />

If you do not see any lights on your modem’s display<br />

panel, make sure it is plugged into a power outlet as well<br />

as your computer. Then check for an on/off switch.<br />

Installing a PC Card modem (also called a PCMCIA<br />

modem) should be easiest of all. On many laptop computers,<br />

the PC Card slot is hidden behind a small door.<br />

Sometimes you have to open the door, and sometimes you<br />

can push right through the door.<br />

Position your PC Card next to the door, make sure it is as<br />

flat as possible, and then slide it into position. When the<br />

PC Card is most of the way inside your computer, you will<br />

need to push a bit harder to seat the PC Card into its connector.<br />

If you have to push any harder, you should probably<br />

take out your PC Card and try again.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!