ServInt Corporation Credit Card Authorization Form - AccessGard

More documents

Recommendations

Info

If the user wants to change the password, he can make it himself* Read card Password # New Password # Repeat Password #4.4 Delete Users:4.4.1 Delete Card users2 Read Card # OR 2 Card number #To delete card user continuously, just input card or card number continuously.If delete card user by ID2 User ID #Remarks: When delete card users, the Master can just delete its ID number anddon’t have to read card. It is good option if the user was left or card lost.4.4.2 Delete Password users2 User ID #4.4.3 Delete card+ password usersTo delete card and password users, just deleting the card is OK.To delete the card, please follow 4.4.1.4.4.4 Delete all the users2 0000 #Note: this will delete all users enrolled. Before this operation, it is suggested tomake sure the data is un-useful.4.5 Lock style setting and door relay time settingFail secure (unlock when power on) : * manager password # 4 0~10 # *Fail safe (unlock when power off): * manager password # 5 1~10 # *Remarks: In programming mode, press 4 is to choose Fail secure lock, 0-10 is to setdoor relay time 0-10 seconds; press 5 is to choose Fail safe lock, 1-10 is to set door relaytime 1- 10 seconds. (Factory default setting is Fail safe lock, relay time 5 seconds.)4.6 Setting Door open dection6 0 # to disable this function (factory default setting)6 1 # to enable this functionWhen enable this function:a) If open the door normally, but not closed after 1 minute, the inside Siren willalarm automatically, the alarm will be off itself after 1 minuteb) If the door is opened force, or the door is opened after 20 seconds of lockreleased, the inside Buzzer and outside Siren will both alarm.AccessGard, Inc. 13230 SW 132 nd Ave, Ste 3, Miami, Fl 33186Tel: (305) 252-3333 Fax : (305) 468-6188 Email : sales@accessgard.com
4.7 Setting Security StatusNormal status: 7 0 # (Factory default setting)Lock on status: 7 1 # In 10 minutes, if there’s 10 times invalid card or wrongPassword, the device will lock on for 10 minutes.Alarm status: 7 2 # In 10 minutes, if there’s 10 times invalid card or wrongPassword, the device will alarm.4.8 Two devices interlock setting8 0 # to disable this function (factory default setting)8 1 # to enable this function4.9 Setting Alarm signal output time9 0~3 #Alarm time is 0-3 minutes, factory default setting 1 minute.4.10 Save and Exit from the programming mode.When finished the setting, press * at last to save and exit from the programmingmode.5. Remove Alarm5.1 Alarm from the Alarm equipment and Buzzer built-inTo remove it: Read valid card OR Manager Password - #3.2 Alarm to close the doorTo remove it: Close the door OR Read valid card OR Manager Password - #6, Sound and Light indicationOperation Status Red Light Green Yellow Light BuzzerLightPower on - Bright - Short RingStand by Bright - - -Press keypad - - - Short RingOperation succeed - Bright - Short RingOperation fail - - - Three shortringEnter into programming Bright - - Short RingmodeIn the programming mode - - Bright -Exit from the Bright - - Short Ringprogramming modeOpen the door - Bright - Short RingAlarm Bright - - AlarmAccessGard, Inc. 13230 SW 132 nd Ave, Ste 3, Miami, Fl 33186Tel: (305) 252-3333 Fax : (305) 468-6188 Email : sales@accessgard.com
Page 1: Model W1 - WaterproofKeypad/Reader/
Page 4 and 5: Specification:Operating Voltage12V
Page 6 and 7: 3.4 Method of Reset to Factory defa
Page 10 and 11: 7, Packing ListName Quantity Remark
Page 12 and 13: 3. Two W1 interconnected - single d

ServInt Corporation Credit Card Authorization Form - AccessGard

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?