VINTAGE KEYS - Synth Zone

MASTER MENU••• This function is usefulwhen sequencing because itallows you route specificMIDI channels to the Submixoutputs. From there they canbe externally processed withreverb or other effects.• Mix OutputThis function allows you override the output assignments made ineach preset and instead assign the outputs according to MIDI channel.This also allows you to change the output assignment of the factorypresets. For each of the 16 MIDI channels, you can select the Main,Sub 1, or Sub 2 outputs, or “P”. When “P” is selected, the outputassignment selected in the preset is used. If no plugs are inserted intothe sub outputs, the audio will be automatically directed to the mainoutputs.MIX OUTPUTchannel 01:P• MIDI ModeThis function selects one of the four MIDI modes and the MIDI systemexclusive ID number.Omni modeVintage Keys responds to note information on all MIDI channelsand plays the preset currently displayed in the main screen.Poly modeVintage Keys only responds to note information received on thecurrently selected MIDI channel (on the preset selection screen)and plays that channel’s associated preset.Multi modeVintage Keys responds to data on any combination of MIDIchannels and plays the specific preset associated with each of theMIDI channels.Mono modeVintage Keys responds to data on any combination of MIDIchannels but plays each channel monophonically. If a new noteon a channel is played before the last note is released, the envelopeswill not be retriggered (legato). Mono mode is particularlyuseful with alternate controllers such as MIDI guitars, etc.▼ Warning: Presets will notbe transferred between twoVintage Keys units unless theID numbers of both unitsmatch.ID numberThis function allows an external programming unit to distinguishbetween multiple Vintage Keys units. In the case of multipleVintage Keys units, each unit should have a different ID number.MIDI MODE IDOmni 0020Vintage Keys Operation Manual